Source for standards, engineering specifications, manuals and technical publications

This document provides examples and background literature for identifying and calculating greenhouse gas displacement potential for wood-based products as defined in ISO 13391-3:2025, including the calculation of displacement factors. This document also provides a review of considerations for further analyses that address the impact of these potentials over time in a broader economy setting.

This document describes the concepts and principles of information and communication technology (ICT) readiness for business continuity (IRBC). It provides a framework of methods and processes to identify and specify aspects for improving an organization's ICT readiness to ensure business continuity. This document serves the following business continuity objectives for ICT: — minimum business continuity objective (MBCO), — recovery point objective (RPO), — recovery time objective (RTO) as part of the ICT business continuity planning. This document is applicable to all types and sizes of organizations. This document describes how ICT departments plan and prepare to contribute to the resilience objectives of the organization.

ISO/IEC 15459-1:2014 specifies a unique string of characters for the identification of individual transport units. The character string is intended to be represented in a bar code label or other AIDC media attached to the entity to meet management needs. To address management needs, different types of entities are recognized in the various parts of ISO/IEC 15459, which allows different requirements to be met by the identities associated with each type.
The rules for the unique identification for individual transport units, to identify physical logistical transfers, with the identity relevant for the duration of one or more items in the load being held or transported as part of that load, are defined and supported by example.

This document specifies requirements and recommendations for representing subject fields and concept relations in TBX-compliant terminological document instances. Examples in this document utilize the data category as attribute (DCA) style of TBX markup.

This document specifies a markup language called QuantML for annotating and representing semantic phenomena relating to quantification in natural language. QuantML comprises an extensible markup language (XML)-based representation format, an abstract syntax and a semantics.

DEN/ERM-TG28-561

This Recommendation | International Standard supplements Rec. ITU-T X.509 | ISO/IEC 9594-8 and Rec. ITU-T X.510 | ISO/IEC 9594-11 by providing an extended description of cryptographic algorithms and guidance in establishment and maintenance of a public-key infrastructure (PKI). It is outside the scope of this Recommendation | International Standard to define new cryptographic algorithms, but it is within scope to discuss already-defined cryptographic algorithms that provide optimal protection, including future protection against attacks using powerful quantum computers. This Recommendation | International Standard specifies how public-key infrastructure (PKI) may be adapted to support machine-to-machine (M2M) communication, e.g., smart grid and Internet of things (IoT), to allow interworking. This Recommendation | International Standard specifies the procedures for establishment and maintenance of a PKI supporting new areas, such as intelligent electricity network (smart grid) and industrial Internet of things.

1.1 General
This part of the IEC 60255 series specifies the requirements for electromagnetic compatibility for measuring relays and protection equipment. It is applicable to measuring relays and protection equipment and combinations of devices to form schemes for power system protection including the control, monitoring, communication and process interface equipment used with those systems.
Tests specified in this document are not required for equipment not incorporating electronic circuits, for example electromechanical relays.
The requirements specified in this document are applicable to measuring relays and protection equipment in a condition representative of how new equipment is provided by the manufacturer. All tests specified are type tests only.
1.2 Emission
This document specifies limits and test methods, for measuring relays and protection equipment in relation to electromagnetic emissions which might cause interference in other equipment.
These emission limits represent electromagnetic compatibility requirements and have been selected to ensure that the disturbances generated by measuring relays and protection equipment, operated normally in substations and power plants, do not exceed a specified level which could prevent other equipment from operating as intended.
Test requirements are specified for the enclosure, auxiliary power supply ports, input/output ports, signal/control ports and wired network ports.
1.3 Immunity
This document specifies the immunity test requirements for measuring relays and protection equipment in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges.
These test requirements represent the electromagnetic compatibility immunity requirements and have been selected so as to ensure an adequate level of immunity for measuring relays and protection equipment, operated normally in substations and power plants.
NOTE 1 Product safety considerations are not covered in this document.
NOTE 2 In special cases, situations will arise where the levels of disturbance could exceed the levels specified in this document, for example where a hand-held transmitter or a mobile telephone is used close to measuring relays and protection equipment. In these instances, special precautions and procedures could have to be employed.

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The characteristics impedance is 100 Ω ± 15 Ω.

This document specifies requirements, recommendations, and guidance on aspects of accessible systems for living independently (ASLI) in relation to technical solutions, service design, provision, and information. This includes adapting design and functionality of systems, to allow ease of use by any user, regardless of their abilities.
This document does not cover system-to-system communication.
This document is not applicable to household and similar electrical appliances covered by EN IEC 63008 [10].

IEC 63522-36:2025 is used for testing all kinds of relays and evaluates their ability to perform under expected conditions of transportation, storage, and all aspects of operational use.
This document defines a standard test method to measure fire hazards of all materials susceptible to fire hazards.

ISO/IEC 15459-3:2014 specifies the common rules applicable for unique identification that are required to ensure full compatibility across different identities.

This document identifies the purpose and benefits of disposition and provides organizations with guidance about how to manage disposition-related processes. In particular, it:
— specifies responsibilities for records disposition processes;
— provides guidance on the key areas against which records disposition processes can be assessed;
— provides requirements and guidance for those implementing disposition processes; and
— provides guidance on how to integrate records disposition processes into an organization’s operations.

IEC 63522-35:2025 is used for testing all kind of relays within the scope of technical committee 94 and evaluates their ability to perform under expected conditions of transportation, storage and all aspects of operational use.
This document defines a standard test method for resistance to cleaning solvents.

This document specifies a method for the rapid determination of the plasticity of raw rubber and unvulcanized compounded rubber. It is applicable to the determination of the plasticity retention index (PRI) as specified in ISO 2930.

This document specifies a method for obtaining a relative measure of the plastic behaviour of hard coal when heated under prescribed conditions. The method is used to obtain values of the plastic properties of coals and blends used in carbonization and in other situations where determination of plastic behaviour of coals is of practical importance. NOTE The empirical nature of this test requires proper equipment calibration to produce fluidity readings which are a true indication of the relative plastic behaviour of the coal.