ASTM D3872-05(2019)
(Test Method)Standard Test Method for Ferrous Iron in Iron Oxides
Standard Test Method for Ferrous Iron in Iron Oxides
SIGNIFICANCE AND USE
3.1 This test method may be used for production quality control or specification acceptance.
SCOPE
1.1 This test method covers the quantitative determination of ferrous oxide (FeO) by oxidation of ferrous iron (Fe++) in an acid solution to the ferric state (Fe+++) and titration with potassium dichromate using diphenylamine as the indicator.
1.2 This test method is applicable to synthetic black iron oxide, natural black iron oxide, magnetite or brown iron oxide where part of the iron content is present in the ferrous state (Note 1). It is applicable to iron oxides where the ferrous iron content ranges from 50 to 0.20 %.
Note 1: Natural iron oxides and magnetite may contain traces of metallic iron that will be combined with and analyzed as FeO.
1.3 This standard does not purport to address the safety concerns if any, problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D3872 − 05 (Reapproved 2019)
Standard Test Method for
Ferrous Iron in Iron Oxides
This standard is issued under the fixed designation D3872; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 4. Apparatus
1.1 This test method covers the quantitative determination
4.1 The digestion apparatus consists of a standard 500-mL
++
of ferrous oxide (FeO) by oxidation of ferrous iron (Fe )inan
Erlenmeyer flask fitted with a two-hole rubber stopper and
+++
acid solution to the ferric state (Fe ) and titration with
glass tubing, as shown in Fig. 1, to provide for the introduction
potassium dichromate using diphenylamine as the indicator.
of the inert gas and vent for gas and digestion fumes.
1.2 This test method is applicable to synthetic black iron
oxide, natural black iron oxide, magnetite or brown iron oxide 5. Reagents
where part of the iron content is present in the ferrous state
5.1 Purity of Reagents—Reagent grade chemicals shall be
(Note 1). It is applicable to iron oxides where the ferrous iron
used in all tests. Unless otherwise indicated, it is intended that
content ranges from 50 to 0.20 %.
all reagents shall conform to the specifications of the Commit-
NOTE 1—Natural iron oxides and magnetite may contain traces of
tee onAnalytical Reagents of theAmerican Chemical Society,
metallic iron that will be combined with and analyzed as FeO. 3
where such specifications are available. Other grades may be
1.3 This standard does not purport to address the safety
used, provided it is first ascertained that the reagent is of
concerns if any, problems associated with its use. It is the
sufficiently high purity to permit its use without lessening the
responsibility of the user of this standard to establish appro-
accuracy of the determination.
priate safety, health, and environmental practices and deter-
5.2 Purity of Water—Unless otherwise indicated, references
mine the applicability of regulatory limitations prior to use.
to water shall be understood to mean Type II of Specification
1.4 This international standard was developed in accor-
D1193.
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the
5.3 Diphenylamine Indicator—Dissolve1gof diphenylam-
Development of International Standards, Guides and Recom-
ine in 100 mL of concentrated (H SO ) (sp gr 1.84).
2 4
mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
5.4 Hydrochloric Acid (1+1)—Dilute concentrated hydro-
chloric acid (HCl, sp gr 1.19) with an equal volume of reagent
2. Referenced Documents
water.
2.1 ASTM Standards:
5.5 Iron Ore, Standard, Sibley No. 27-f.
D280 Test Methods for Hygroscopic Moisture (and Other
5.6 Potassium Dichromate, Standard Solution (0.1 N)—
Matter Volatile Under the Test Conditions) in Pigments
D1193 Specification for Reagent Water Dissolve 4.904 g of K Cr O in water and dilute to 1 L.
2 2 7
Standardize against National Institute of Standards and Tech-
3. Significance and Use
nology standard sample No. 27f of Sibley iron ore. Calculate
the Fe factor in grams per millilitre for the solution as:
3.1 This test method may be used for production quality
control or specification acceptance.
Fe 5 W/V (1)
This test method is under the jurisdiction of ASTM Committee D01 on Paint
and Related Coatings, Materials, andApplications and is the direct responsibility of Reagent Chemicals, American Chemical Society Specifications, American
Subcommittee D01.31 on Pigment Specifications. Chemical Society, Washington, DC. For suggestions on the testing of reagents not
Current edition approved May 1, 2019. Published May 2019. Originally listed by the American Chemical Society, see Analar Standards for Laboratory
approved in 1979. Last previous edition approved in 2011 as D3872 – 05 (2011). Chemicals, BDH Ltd., Poole, Dorset, U.K., and the United States Pharmacopeia
DOI: 10.1520/D3872-05R19. and National Formulary, U.S. Pharmacopeial Convention, Inc. (USPC), Rockville,
For referenced ASTM standards, visit the ASTM website, www.astm.org, or MD.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM May be secured from National Institute of Standards and Technology, Depart-
Standards volume information, refer to the standard’s Document Summary page on ment of Commerce, Washington, DC 20234. Other recognized primary iron
the ASTM website. standard may be substituted.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
D3872 − 05 (2019)
FIG. 1 Digestion Apparatus
to avoid generating heat, as additional grinding could oxidize ferrous to
where:
ferric iron.
W = weight of Fe in the standard iron ore (not the solution,
as there is none), and
7. Procedure
V =K Cr O required f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.