iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10219-2:1997

(Main)

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

This Part of this European Standard specifies the tolerances for cold formed welded circular, square and rectangular structural hollow sections and gives the dimensions and sectional properties for a range of standard sizes.  For the technical delivery requirements see EN 10219-1.

Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische Werte

Dieser Teil 2 der europäischen Norm EN 10219 enthält die Anforderungen an die Grenzabmasse und Formtoleranzen von kaltgefertigten geschweißten Hohlprofilen mit kreisförmigem, quadratischem oder rechteckigem Querschnitt füt den Stahlbau; er enthält ferner Angaben über die Nennmaße und statischen Werte für eine Reihe von Standardabmessungen. Wegen der technischen Lieferbedingunegen siehe EN 10219-1.

Profils creux pour la construction formés à froid en aciers de construction non-alliés et à grains fins - Partie 2: Tolérances, dimensions et caractéristiques du profil

La présente partie de la norme européenne spécifie les tolérances concernant les profils creux formés à froid de section rectangulaire, carrée et circulaire destinés à la construction, ainsi que les dimensions et les caractéristiques du profil pour toute une gamme de profils standards. Pour les conditions techniques de livraison, voir l'EN 10219-1.

Hladno oblikovani varjeni votli konstrukcijski profili iz nelegiranih in drobnozrnatih jekel - 2. del: Mere, mejni odstopki in značilnosti profilov

General Information

Status
Withdrawn
Publication Date
19-Aug-1997
Withdrawal Date
25-Apr-2006
ICS
77.140.75 - Steel pipes and tubes for specific use
Technical Committee
ECISS/TC 103 - Structural steels other than reinforcements
Drafting Committee
ECISS/TC 10/SC 1 - Structural steel - Hollow sections
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Apr-2006
Completion Date
26-Apr-2006
Mandate
M/BC/CEN/89/10 - ECISS - 3rd programme
Ref Project
SIST EN 10219-2:1998 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

Relations

Replaced By
EN 10219-2:2006 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
Effective Date
22-Dec-2008

Buy Standard

EN 10219-2:1998EN 10219-2:1998
PreviousNext
Standard
EN 10219-2:1998
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische WerteProfils creux pour la construction formés a froid en aciers de construction non-alliés et a grains fins - Partie 2: Tolérances, dimensions et caractéristiques du profilCold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10219-2:1997SIST EN 10219-2:1998en01-avgust-1998SIST EN 10219-2:1998SLOVENSKI
STANDARD



SIST EN 10219-2:1998



SIST EN 10219-2:1998



SIST EN 10219-2:1998



SIST EN 10219
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10219-3:2020(Main)
Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
SIST EN 10219-3:2020

This document specifies the technical delivery conditions for high strength and weather resistant electric welded and submerged arc welded cold formed steel structural hollow sections of circular, square, rectangular or elliptical forms and formed cold without subsequent heat treatment other than the heat treatment of the weld line.
NOTE 1   The requirements for tolerances, dimensions and sectional properties can be found in EN 10219 2.
NOTE 2   The attention of users is drawn to the fact that whilst cold formed grades in this document can have equivalent mechanical properties to hot-finished grades in EN 10210 3, the sectional properties of square and rectangular hollow sections in EN 10219 2 and EN 10210 2 are not equivalent.
NOTE 3   A range of steel grades is specified in this document and the user can select the grade most appropriate to the intended use and service conditions. The grades and mechanical properties, but not the final supply condition of cold formed hollow sections are generally comparable with those in EN 10025 3, EN 10025 4, EN 10025 5, EN 10025 6, EN 10149 2 and EN 10149 3.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10210-3:2020(Main)
Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
SIST EN 10210-3:2020

This document specifies technical delivery conditions for high strength and weather resistant hot-finished seamless, electric welded and submerged arc welded steel structural hollow sections of circular, square, rectangular or elliptical forms.
It applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment above 580 °C to obtain equivalent mechanical properties to those obtained in the hot formed product.
NOTE 1   The requirements for tolerances, dimensions and sectional properties are specified in EN 10210-2.
NOTE 2   The attention of users is drawn to the fact that whilst cold formed grades in EN 10219-3 can have equivalent mechanical properties to hot-finished grades in this document the sectional properties of square and rectangular hollow sections in EN 10210-2 and EN 10219-2 are not equivalent.
NOTE 3   A range of material grades is specified in this document and the user can select the grade most appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are generally comparable with those in EN 10025-4, EN 10025-5 and EN 10025-6.
NOTE 4   The requirements for seamless and welded steel structural hollow sections for use in offshore structures are covered in the EN 10225 series.
NOTE 5    Spiral welded hollow sections are expected to be used with caution in applications involving dynamic behaviour (fatigue stress) as, up to now, there is insufficient data regarding their performance.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10219-2:2019(Main)
Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
SIST EN 10219-2:2019

This document specifies tolerances for cold formed welded circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges:
-   circular: Outside diameters up to 2 500 mm;
-   square: Outside dimensions up to 500 mm × 500 mm;
-   rectangular: Outside dimensions up to 500 mm × 300 mm;
-   elliptical: Outside dimensions up to 480 mm × 240 mm.
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex A.
Dimensions and sectional properties for a limited range of more common sizes are given in Annex B.
NOTE   The designation of the sections' major axis (yy) and minor axis (zz) aligns with the axis designation used for structural design in the structural Eurocodes.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10225-4:2019(Main)
Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
SIST EN 10225-4:2019

This document specifies requirements for submerged arc welded (SAW) and high frequency welded (HFW) cold formed hollow sections to be used in the fabrication of fixed offshore structures.
The thickness limit for SAWL circular hollow sections is up to and including 50,8 mm, for HFW circular hollow sections up to and including 25,4 mm and for HFW square and rectangular hollow sections up to and including 12,5 mm.
Greater thicknesses for SAWL hollow sections can be agreed provided the technical requirements of this European Standard are maintained.
NOTE 1   This document has an Annex E for SAWH round hollow sections with a thickness limit of 30,0 mm, and an Annex F for high strength square and rectangular HFW hollow sections made of steel grades S500 to S700.
This European Standard is applicable to steels for offshore structures designed to operate in the offshore sector but not to steels supplied for the fabrication of subsea pipelines, risers, process equipment, process piping and other utilities. It is primarily applicable to the North Sea Sector, but may also be applicable in other areas provided that due consideration is given to local conditions e.g. design temperature.
NOTE 2   This document has an informative Annex G on the prequalification of steels for fixed offshore structures in arctic areas.
Minimum yield strengths up to 700 MPa are specified together with impact properties at temperatures down to -40 °C.
NOTE 3   A range of material grades is specified in this standard and the user can select the grade most appropriate to the intended use and its service condition.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10210-2:2019(Main)
Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
SIST EN 10210-2:2019

This document specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges:
-   Circular: Outside diameters up to 2 500 mm;
-   Square: Outside dimensions up to 800 mm × 800 mm;
-   Rectangular: Outside dimensions up to 750 mm × 500 mm;
-   Elliptical: Outside dimensions up to 500 mm × 250 mm.
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex A.
Dimensions and sectional properties for a limited range covering the more common sizes are given in Annex B.
NOTE   The designation of the sections' major axis (yy) and minor axis (zz) aligns with the axis designation used for structural design in the structural Eurocodes.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10210-1:2006(Main)
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
SIST EN 10210-1:2006

This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10210-2.
NOTE   A range of material grades is specified in this standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10219-1:2006(Main)
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
SIST EN 10219-1:2006

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.
NOTE   A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 103XY(Main)
General requirements for cold formed welded structural steel hollow sections
oSIST prEN 10219-1:2016

This part of prEN 10219 specifies the product characteristics, test methods and performance criteria for electric welded and submerged arc welded cold formed structural steel hollow sections of circular, square, rectangular or elliptical forms, produced without any subsequent heat treatment other than the heat treatment of the weld line.
Requirements for the technical delivery conditions are specified in prEN 10219-2 and for tolerances, dimensions and sectional properties in prEN 10219-3.
NOTE 1    prEN 10219-1 covers provision of the Construction Products Regulations (CPR) to fulfil European law for construction products. The technical delivery conditions are described within prEN 10219-2 in combination with Clauses 2, 3, 4, 5, 7 and 8 of prEN 10219-1.
NOTE 2   Hollow sections for offshore structures are covered in EN 10225.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 10368(Main)
Steel structural hollow sections - General (Characteristics, evaluation of conformity and marking)
oSIST prEN 10210-1:2016

This part of prEN 10210 specifies the product characteristics, test methods and performance criteria for hot-finished seamless, electric welded and submerged arc welded steel structural hollow sections of circular, square, rectangular or elliptical forms.
It applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment above 580 °C to obtain equivalent mechanical conditions to those obtained in the hot formed product.
Requirements for the technical delivery conditions are specified in prEN 10210-2 and for tolerances, dimensions and sectional properties in prEN 10210-3.
NOTE 1    prEN 10210-1 covers provision of the Construction Products Regulations (CPR) to fulfil European law for construction products. The technical delivery conditions are described within prEN 10210-2 in combination with Clauses 2, 3, 4, 5, 7 and 8 of prEN 10210-1.
NOTE 2   Seamless and welded hollow sections for offshore structures are covered in EN 10225.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 10219-1 rev(Main)
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
oSIST prEN 10219-2:2016

This part of the European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day