EN 10164:2004

Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

This European Standard specifies through thickness properties and associated test methods for flat products and sections of steel.
This European Standard may be applied as a supplement to all product standards for flat products and sections of killed steels, except stainless steels. It covers products having a thickness between 15 mm and 400 mm inclusive of steels with a specified minimum upper yield strength ReH or proof strength Rp0,2 £ 960 MPa ) for which improved through thickness properties are required.
The application of this European Standard to other product thicknesses and other steel types shall be the subject of agreement at the time of the order.
See option 1.

Stahlerzeugnisse mit verbesserten Verfomungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische Lieferbedingungen

Dieses Dokument legt Anforderungen fest an die Eigenschaften senkrecht zur Erzeugnisoberflache von
Flacherzeugnissen und Profilen aus Stahl sowie die entsprechenden Prufverfahren.
Dieses Dokument kann als Erganzung zu allen Erzeugnisnormen fur Flacherzeugnisse und Profile aus voll
beruhigten Stahlen mit Ausnahme der nichtrostenden Stahle angewendet werden. Sie gilt fur Erzeugnisse in
Dicken von 15 mm bis 400 mm aus Stahlen mit einem festgelegten Mindestwert der oberen Streckgrenze ReH oder
der Dehngrenze Rp0,2 ¡Â960 MPa 1) , fur die verbesserte Eigenschaften senkrecht zur Erzeugnisoberflache gefordert
werden.
Die Anwendung dieses Dokumentes auf andere Erzeugnisdicken und Stahlsorten ist bei der Bestellung besonders
zu vereinbaren.
Siehe Option 1.

Aciers de construction à caractéristiques de déformation améliorées dans le sens perpendiculaire à la surface du produit - Conditions techniques de livraison

Jekleni izdelki z izboljšanimi deformacijskimi lastnostmi, pravokotno na površino izdelka – Tehnični dobavni pogoji

General Information

• Status: Withdrawn
• Publication Date: 07-Dec-2004
• Withdrawal Date: 02-Oct-2018
• ICS: 77.140.50 - Flat steel products and semi-products
• ICS: 77.140.70 - Steel profiles
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10 - Structural steels - Qualities
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 03-Oct-2018
• Ref Project: SIST EN 10164:2005 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

Relations

• Replaces: EN 10164:1993 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
• Effective Date: 22-Dec-2008
• Replaced By: EN 10164:2018 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
• Effective Date: 26-Feb-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlerzeugnisse mit verbesserten Verfomungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische LieferbedingungenAciers de construction a caractéristiques de déformation améliorées dans le sens perpendiculaire a la surface du produit - Conditions techniques de livraisonSteel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions77.140.01Železni in jekleni izdelki na splošnoIron and steel products in generalICS:Ta slovenski standard je istoveten z:EN 10164:2004SIST EN 10164:2005en01-februar-2005SIST EN 10164:2005SLOVENSKI
STANDARDSIST EN 10164:19981DGRPHãþD



SIST EN 10164:2005



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10164
December 2004 ICS 77.140.70 Supersedes EN 10164:1993 English version
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Aciers de construction à caractéristiques de déformation améliorées dans le sens perpendiculaire à la surface du produit - Conditions techniques de livraison
Stahlerzeugnisse mit verbesserten Verfomungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische Lieferbedingungen This European Standard was approved by CEN on 4 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10164:2004: ESIST EN 10164:2005



EN 10164:2004 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Designation.5 4 Information to be supplied by the purchaser.6 4.1 Mandatory information.6 4.2 Options.6 5 Requirements.6 5.1 Reduction of area.6 5.2 Ultrasonic testing.7 6 Inspection.7 6.1 Test units.7 6.1.1 General.7 6.1.2 Flat products.
...