EN 10306:2001

Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams

This European Standard describes a reflection method for the ultrasonic testing of H beams with parallel flanges and IPE beams for the detection of presence of internal discontinuities. Mechanised, semi-automatic or automatic techniques may be used but should be agreed between the purchaser and the supplier.

Eisen und Stahl - Ultraschallprüfung von H-Profilen mit parallelen Flanschen und IPE-Profilen

Diese Europäische Norm legt ein Reflexionsverfahren für die Ultraschallprüfung von H-Profilen mit parallelen Flanschen und von IPE-Profilen zum Nachweis von inneren Inhomogenitäten fest. Mechanisierte, halbautomatische oder automatische Techniken dürfen angewendet werden, sollten aber zwischen Besteller und Lieferer vereinbart werden.

Produits sidérurgiques - Contrôle par ultrasons des poutrelles H à larges ailes à faces parallèles et des poutrelles IPE

La présente Norme européenne spécifie une méthode par réflexion pour le contrôle par ultrasons des poutrelles à larges ailes à faces parallèles et des poutrelles IPE pour la détection des discontinuités internes. Les techniques mécanisées, semi-automatiques ou automatiques peuvent être utilisées mais il convient qu'elles fassent l'objet d'un accord entre le fournisseur et le client.

Železo in jeklo – Ultrazvočno preskušanje profilov H z vzporednimi pasovi in profilov IPE

General Information

• Status: Published
• Publication Date: 11-Dec-2001
• Withdrawal Date: 29-Jun-2002
• ICS: 77.040.20 - Non-destructive testing of metals
• ICS: 77.140.70 - Steel profiles
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 2 - Steel - Physico-chemical and non-destructive testing
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 06-Apr-2020
• Ref Project: SIST EN 10306:2004 - Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eisen und Stahl - Ultraschallprüfung von H-Profilen mit parallelen Flanschen und IPE-ProfilenProduits sidérurgiques - Contrôle par ultrasons des poutrelles H a larges ailes a faces paralleles et des poutrelles IPEIron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams77.140.70Jekleni profiliSteel profiles77.040.20Neporušitveno preskušanje kovinNon-destructive testing of metalsICS:Ta slovenski standard je istoveten z:EN 10306:2001SIST EN 10306:2004en01-marec-2004SIST EN 10306:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10306December 2001ICS 77.040.20; 77.140.70English versionIron and steel - Ultrasonic testing of H beams with parallelflanges and IPE beamsProduits sidérurgiques - Contrôle par ultrasons despoutrelles à larges ailes à faces parallèles et des poutrellesIPEEisen und Stahl - Ultraschallprüfung von H-Profilen mitparallelen Flanschen und IPE-ProfilenThis European Standard was approved by CEN on 30 September 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10306:2001 ESIST EN 10306:2004

List of equivalent terms in several European languages.13Bibliography.14SIST EN 10306:2004

1)In this case, all steps should be taken to ensure that the production process is not disturbed.SIST EN 10306:2004
...