EN 10140:2006

Cold rolled narrow steel strip - Tolerances on dimensions and shape

1.1   This European Standard applies to cold rolled narrow strip in coils and cut lengths, in thicknesses up to 10 mm and of widths less than 600 mm, made from unalloyed and alloyed steels, mainly those specified in EN 10132,
EN 10139 and prEN 10338, with the exception of stainless and heat-resisting steels and the products given in 1.2.
The application of this European Standard to products with other dimensions shall be agreed separately.
1.2   This European Standard does not cover cold rolled flat products for which a separate standard already exists, particularly the following products:
   cold rolled non-oriented magnetic steel sheet and strip (EN 10106);
   grain-oriented magnetic steel sheet and strip (EN 10107);
   semi-processed steel strip for the construction of magnetic circuits (EN 10126 and EN 10165);
   cold rolled uncoated low carbon and high yield strength steel flat products for cold forming (EN 10131);
cold reduced blackplate (EN 10205).

Kaltband - Grenzabmaße und Formtoleranzen

1.1   Diese Europäische Norm gilt für Kaltband in Rollen und für Kaltband in Stäben in Dicken bis zu 10 mm und in Breiten kleiner 600 mm aus unlegierten und legierten Stählen mit Ausnahme der nichtrostenden und hitzebeständigen Stähle sowie der in 1.2 genannten Erzeugnisse.
Die Anwendung dieser Europäischen Norm auf Erzeugnisse mit anderen Nennmaßen muss besonders vereinbart werden.
1.2   Diese Europäische Norm gilt nicht für kaltgewalzte Flacherzeugnisse, für die eigene Normen bestehen, insbesondere für folgende Erzeugnisse:
¾ kaltgewalztes nichtkornorientiertes Elektroblech und - band (EN 10106);
¾ kornorientiertes Elektroblech und -band (EN 10107);
¾ kaltgewalztes nicht schlussgeglühtes Elektroblech und -band (EN 10126 und EN 10165);
¾ kaltgewalzte Flacherzeugnisse ohne Überzug aus weichen Stählen sowie aus Stählen mit höherer Streckgrenze zum Kaltumformen (EN 10131);
¾ kaltgewalztes Feinstblech in Rollen (EN 10205).

Feuillards laminés à froid - Tolérances de dimensions et de forme

Hladno valjani ozki jekleni trakovi – Mejni odstopki mer in tolerance oblik

General Information

• Status: Published
• Publication Date: 11-Jul-2006
• Withdrawal Date: 30-Jan-2007
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
• Drafting Committee: ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Dec-2016
• Completion Date: 15-Dec-2016
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10140:2006 - Cold rolled narrow steel strip - Tolerances on dimensions and shape

Relations

• Replaces: EN 10140:1996 - Cold rolled narrow steel strip - Tolerances on dimensions and shape
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cold rolled narrow steel strip - Tolerances on dimensions and shapeHladno valjani ozki jekleni trakovi – Mejni odstopki mer in tolerance oblikFeuillards laminés a froid - Tolérances de dimensions et de formeKaltband - Grenzabmaße und FormtoleranzenTa slovenski standard je istoveten z:EN 10140:2006SIST EN 10140:2006en77.140.50ICS:SIST EN 10140:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 10140:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10140July 2006ICS 77.140.50Supersedes EN 10140:1996
English VersionCold rolled narrow steel strip - Tolerances on dimensions andshapeFeuillards laminés à froid - Tolérances de dimensions et deformeKaltband - Grenzabmaße und FormtoleranzenThis European Standard was approved by CEN on 12 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10140:2006: E



EN 10140:2006 (E) 2 Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Form and conditions of delivery.4 4.1 Form of delivery.4 4.2 Condition of delivery.5 5 Designation.5 6 Tolerances on dimensions.6 6.1 Thickness.6 6.2 Width.6 6.3 Length.7 7 Tolerances on shape.8 7.1 Edge camber.8 7.2 Flatness of cut lengths.8 7.3 Out-of-squareness.8 8 Measurements.9 8.1 Thickness.
...