EN 912:2011

Timber fasteners - Specifications for connectors for timbers

This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.

Holzverbindungsmittel - Spezifikationen für Dübel besonderer Bauart für Holz

Diese Europäische Norm legt die Maße und Werkstoffe bestimmter bestehender Dübel besonderer Bauart für Verbindungen in tragenden Holzkon¬struktionen fest.
Hinsichtlich der Werte für die Tragfähigkeits- und Verformungseigenschaften von Verbindungen mit den Dübeln besonderer Bauart wird auf EN 13271 verwiesen.

Organes d'assemblage pour le bois - Spécifications des assembleurs pour bois

La présente Norme européenne spécifie les dimensions et les matériaux de certains assembleurs largement utilisés pour la réalisation des assemblages entre éléments de structures en bois porteuses.
Pour les données relatives aux propriétés de résistance et de déformation d'assemblages réalisés avec les assembleurs, se référer à l'EN 13271.

Vezna sredstva za les - Specifikacije za moznike za les

Ta evropski standard opredeljuje dimenzije in materiale določenih dobro uveljavljenih moznikov, ki se uporabljajo v spojih med členi v nosilnih lesenih konstrukcijah.
Za podatke o lastnostih glede trdnosti in deformacije spojev, narejenih z mozniki, je podan sklic na EN 13271.

General Information

• Status: Published
• Publication Date: 12-Jul-2011
• Withdrawal Date: 30-Jan-2012
• ICS: 21.060.99 - Other fasteners
• ICS: 91.080.20 - Timber structures
• Technical Committee: CEN/TC 124 - Timber structures
• Drafting Committee: CEN/TC 124/WG 4 - Connectors
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 19-May-2017
• Ref Project: SIST EN 912:2012 - Timber fasteners - Specifications for connectors for timbers

Relations

• Replaces: EN 912:1999 - Timber fasteners - Specifications for connectors for timber
• Effective Date: 16-Jul-2011
• Replaces: EN 912:1999/AC:2000 - Timber fasteners - Specifications for connectors for timber
• Effective Date: 16-Jul-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
1DGRPHãþD
SIST EN 912:2000
SIST EN 912:2000/AC:2002
Vezna sredstva za les - Specifikacije za moznike za les
Timber fasteners - Specifications for connectors for timbers
Holzverbindungsmittel - Festlegungen für Dübel bezonderer Bauart für Holz
Eléments de fixation - Spécifications des connecteurs pour structures en bois
Ta slovenski standard je istoveten z: EN 912:2011
ICS:
21.060.99 Drugi vezni elementi Other fasteners
91.080.20 Lesene konstrukcije Timber structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 912
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 21.060.99; 91.080.20 Supersedes EN 912:1999
English Version
Timber fasteners - Specifications for connectors for timbers
Organes d'assemblage pour le bois - Spécifications des Holzverbindungsmittel - Spezifikationen für Dübel
assembleurs pour bois besonderer Bauart für Holz
This European Standard was approved by CEN on 17 June 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 912:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Symbols .6
5 Requirements .7
5.1 General .7
5.2 Classification and requirements of connectors .7
6 Marking .7
Annex A (normative) Specifications for ring connectors .8
A.1 Type A1 .8
A.1.1 Description and dimensions .8
A.1.2 Material .9
A.2 Type A2 .9
A.2.1 Description and dimensions .9
A.2.2 Material . 10
A.3 Type A3 . 11
A.3.1 Description and dimensions . 11
A.3.2 Material . 12
A.4 Type A4 . 12
A.4.1 Description and dimensions . 12
A.4.2 Material . 14
A.5 Type A5 . 14
A.5.1 Description and dimensions . 14
A.5.2 Material . 16
A.6 Type A6 . 16
A.6.1 Description and dimensions . 16
A.6.2 Material . 18
Annex B (normative) Specifications for plate connectors . 19
B.1 Type B1 . 19
B.1.1 Description and dimensions . 19
B.1.2 Material . 19
B.2 Type B2 . 21
B.2.1 Description and dimensions . 21
B.2.2 Material . 21
B.3 Type B3 . 23
B.3.1 Description and dimensions . 23
B.3.2 Material . 23
B.4 Type B4 . 25
B.4.1 Description and dimensions . 25
B.4.2 Material . 26
Annex C (normative) Specifications for toothed-plate connectors . 27
C.1 Type C1 . 27
C.1.1 Description and dimensions . 27
C.1.2 Material . 28
C.2 Type C2 . 29
C.2.1 Description and dimensions . 29
C.2.2 Material . 30
C.3 Type C3 . 30
C.3.1 Description and dimensions . 30
C.3.2 Material . 32
C.4 Type C4 . 32
C.4.1 Description and dimensions . 32
C.4.2 Material . 34
C.5 Type C5 . 34
C.5.1 Description and dimensions . 34
C.5.2 Material . 35
C.6 Type C6 . 35
C.6.1 Description and dimensions . 35
C.6.2 Material . 36
C.7 Type C7 . 37
C.7.1 Description and dimensions . 37
C.7.2 Material . 38
C.8 Type C8 . 38
C.8.1 Description and dimensions . 38
C.8.2 Material . 39
C.9 Type C9 . 40
C.9.1 Description and dimensions . 40
C.9.2 Material . 41
C.10 Type C10 . 41
C.10.1 Description and dimensions . 41
C.10.2 Material . 43
C.11 Type C11 . 43
C.11.1 Description and dimensions . 43
C.11.2 Material . 44
Annex D (normative) Specifications for other connectors . 46
D.1 Type D1 . 46
D.1.1 Description .
...