Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)

ISO 17827-1:2016 specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The method is intended to characterize material up to a particle size class of P63. For larger P-classes, the characterization is mainly done by hand sorting.

Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren mit Sieben mit einer Lochgröße von 3,15 mm und darüber (ISO 17827-1:2016)

Biocombustibles solides - Détermination de la distribution granulométrique des combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm (ISO 17827-1:2016)

ISO 17827-1:2016 spécifie une méthode pour la détermination de la distribution granulométrique de biocombustibles particulaires au tamis oscillant dans le plan horizontal. Elle s'applique aux combustibles particulaires non comprimés de dimension supérieure nominale égale ou supérieure à 3,15 mm, tels que les copeaux, les bûchettes, les noyaux d'olive, etc. La méthode a pour but de caractériser les matériaux jusqu'à une classe granulométrique de P63. Pour les classes en P supérieures, la caractérisation se fait essentiellement par tri manuel.

Trdna biogoriva - Določevanje porazdelitve velikosti delcev za nestisnjena goriva - 1. del: Metoda z nihajočim sitom z odprtinami 3,15 mm ali več (ISO 17827-1:2016)

Ta mednarodni standard opisuje metodo za določevanje porazdelitve velikosti delcev biogoriv z metodo z vodoravno nihajočim sitom. Uporablja se za nestisnjena goriva z nazivno zrnatostjo vsaj 1 mm, kot so lesni sekanci, drobljenci, olivne koščice itd. Vzorec se preseje skozi vodoravno nihajoča sita, ki mehansko razvrstijo delce po velikosti od največjih do najmanjših. Sejanje mora potekati z vodoravno nihajočim premikanjem (eno- ali dvodimenzionalno) in uporabo ustrezne frekvence sunkov v skladu z vrsto materiala. Število sit in velikosti njihovih odprtin je treba izbrati v skladu s specifikacijo velikosti dejanskega vzorčnega materiala.

General Information

Status
Published
Publication Date
05-Apr-2016
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
06-Apr-2016
Completion Date
06-Apr-2016

RELATIONS

Buy Standard

Standard
EN ISO 17827-1:2016
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 17827-1:2016
01-junij-2016
1DGRPHãþD
SIST EN 15149-1:2011

7UGQDELRJRULYD'RORþHYDQMHSRUD]GHOLWYHYHOLNRVWLGHOFHY]DQHVWLVQMHQDJRULYD

GHO0HWRGD]QLKDMRþLPVLWRP]RGSUWLQDPLPPDOLYHþ ,62

Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part

1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO

17827-1:2016)

Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte

Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren (ISO 17827-1:2016)
Biocombustibles solides - Détermination de la distribution granulométrique des

combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille

égale ou supérieure à 3,15 mm (ISO 17827-1:2016)
Ta slovenski standard je istoveten z: EN ISO 17827-1:2016
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 17827-1:2016 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 17827-1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 17827-1:2016
EN ISO 17827-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 75.160.10; 27.190 Supersedes EN 15149-1:2010
English Version
Solid biofuels - Determination of particle size distribution
for uncompressed fuels - Part 1: Oscillating screen method
using sieves with apertures of 3,15 mm and above (ISO
17827-1:2016)

Biocombustibles solides - Détermination de la Biogene Festbrennstoffe - Bestimmung der

distribution granulométrique des combustibles non Partikelgrößenverteilung für unkomprimierte

comprimés - Partie 1: Méthode au tamis oscillant Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren

d'ouverture de maille égale ou supérieure à 3,15 mm mit Sieben mit einer Lochgröße von 3,15 mm und

(ISO 17827-1:2016) darüber (ISO 17827-1:2016)
This European Standard was approved by CEN on 20 February 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17827-1:2016 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17827-1:2016
EN ISO 17827-1:2016 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 17827-1:2016
EN ISO 17827-1:2016 (E)
European foreword

This document (EN ISO 17827-1:2016) has been prepared by Technical Committee ISO/TC 238 "Solid

biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of

which is held by SIS.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall

be withdrawn at the latest by October 2016.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.
This document supersedes EN 15149-1:2010.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 17827-1:2016 has been approved by CEN as EN ISO 17827-1:2016 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 17827-1:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 17827-1:2016
INTERNATIONAL ISO
STANDARD 17827-1
First edition
2016-03-01
Solid biofuels — Determination
of particle size distribution for
uncompressed fuels —
Part 1:
Oscillating screen method using sieves
with apertures of 3,15 mm and above
Biocombustibles solides — Détermination de la distribution
granulométrique des combustibles non comprimés —
Partie 1: Méthode au tamis oscillant d’ouverture de maille égale ou
supérieure à 3,15 mm
Reference number
ISO 17827-1:2016(E)
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 17827-1:2016
ISO 17827-1:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17827-1:2016
ISO 17827-1:2016(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 2

5 Apparatus ..................................................................................................................................................................................................................... 2

6 Sample preparation ........................................................................................................................................................................................... 3

6.1 Sample size ................................................................................................................................................................................................. 3

6.2 Moisture conditioning ...................................................................................................................................................................... 3

7 Procedure..................................................................................................................................................................................................................... 4

8 Calculation .................................................................................................................................................................................................................. 4

9 Performance characteristics .................................................................................................................................................................... 5

9.1 Repeatability ............................................................................................................................................................................................. 5

9.2 Reproducibility ....................................................................................................................................................................................... 6

10 Test report ................................................................................................................................................................................................................... 6

Annex A (normative) Determination of the median value of a particle size distribution ............................7

Bibliography ................................................................................................................................................................................................................................ 9

© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17827-1:2016
ISO 17827-1:2016(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity

assessment, as well as information about ISO’s adherence to the WTO principles in the Technical

Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.

The committee responsible for this document is ISO/TC 238, Solid biofuels.

ISO 17827 consists of the following parts under the general title Solid biofuels — Determination of

particle size distribution for uncompressed fuels:

— Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above

— Part 2: Vibrating screen method using sieves with apertures of 3,15 mm and below

NOTE ISO 17827–2 can also be used for round hole sieves with apertures of 4,0 mm and 5,6 mm.

iv © ISO 2016 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 17827-1:2016
INTERNATIONAL STANDARD ISO 17827-1:2016(E)
Solid biofuels — Determination of particle size distribution
for uncompressed fuels —
Part 1:
Oscillating screen method using sieves with apertures of
3,15 mm and above
1 Scope

This part of ISO 17827 specifies a method for the determination of the size distribution of particulate

biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed

fuels with a nominal top size of 3,15 mm and above, e.g. wood chips, hog fuel, olive stones, etc. The

method is intended to characterize material up to a particle size class of P63. For larger P-classes, the

characterization is mainly done by hand sorting.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

ISO 3310–2, Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate

ISO 16559, Solid biofuels — Terminology, definitions and descriptions

ISO 17225–1, Solid biofuels — Fuel specifications and classes — Part 1: General requirements

ISO 17827–2 , Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part

2: Vibrating screen method using sieves with apertures of 3,15 mm and below

ISO 18134–1, Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total

moisture — Reference method

ISO 18134–2, Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total

moisture — Simplified method
EN 14778, Solid biofuels — Sampling
EN 14780, Solid biofuels — Sample preparation
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 16559 and the following apply.

3.1
median value of the size distribution
median value [d50] that separates a distribution into two equal parts

Note 1 to entry: Graphically, the median value is the intercept point of the cumulative size distribution curve

with the 50 % horizontal line.
1) To be published.
© ISO 2016 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST EN ISO 17827-1:2016
ISO 17827-1:2016(E)
3.2
sieve fraction
material collected on a sieve
4 Principle
A lab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.