EN ISO 14064-1:2012

Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006)

ISO 14064-1:2006 specifies principles and requirements at the organization level for quantification and reporting of greenhouse gas (GHG) emissions and removals. It includes requirements for the design, development, management, reporting and verification of an organization's GHG inventory.

Treibhausgase - Teil 1: Spezifikation mit Anleitung zur quantitativen Bestimmung und Berichterstattung von Treibhausgasemissionen und Entzug von Treibhausgasen auf Organisationsebene (ISO 14064-1:2006)

Der vorliegende Teil von ISO 14064 legt die Grundsätze für und die Anforderungen an die quantitative Bestimmung und Berichterstattung von Treibhausgasemissionen und von dem Entzug von Treibhausgasen auf Organisationsebene fest. Er enthält Anforderungen an Planung, Erstellung, Management, Berichterstattung und Verifizierung der Treibhausgasbilanz einer Organisation.
ISO 14064 ist gegenüber Klimaschutzprogrammen neutral. Wenn ein Klimaschutzprogramm anwendbar ist, gelten die Anforderungen dieses Klimaschutzprogramms ergänzend zu den Anforderungen von ISO 14064.
ANMERKUNG   Wenn eine Anforderung von ISO 14064 eine Organisation oder einen Antragsteller eines Klimaschutzprojektes daran hindert, eine Anforderung des Klimaschutzprogramms zu erfüllen, hat die Anforderung des Klimaschutzprogramms Vorrang.

Gaz à effet de serre - Partie 1: Spécifications et lignes directrices, au niveau des organismes, pour la quantification et la déclaration des émissions et des suppressions des gaz à effet de serre (ISO 14064-1:2006)

L'ISO 14064-1:2006 spécifie les principes et les exigences, au niveau des organismes, pour la quantification et la rédaction de rapports sur les émissions de gaz à effet de serre (GES) et leur suppression. Elle comprend des exigences pour la conception, la mise au point, la gestion, la rédaction de rapports et la vérification de l'inventaire des GES d'un organisme.

Toplogredni plini - 1. del: Specifikacija z navodilom za količinsko določanje in poročanje o emisijah in odstranjevanju toplogrednih plinov na ravni organizacije (ISO 14064-1:2006)

Ta del standarda ISO 14064 določa načela in zahteve za količinsko določanje in poročanje o emisijah in odstranjevanju toplogrednih plinov (GHG) na ravni organizacije. Vključuje zahteve v zvezi s pripravo, razvojem, upravljanjem in preverjanjem evidenc toplogrednih plinov v organizaciji ter poročanjem o njih. ISO 14064 je nevtralen glede programa toplogrednih plinov. Če se uporablja program toplogrednih plinov, zahteve tega programa toplogrednih plinov veljajo dodatno poleg zahtev standarda ISO 14064.

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2012
• Withdrawal Date: 05-Feb-2019
• ICS: 07.060 - Geology. Meteorology. Hydrology
• ICS: 13.020.40 - Pollution, pollution control and conservation
• ICS: 13.040.01 - Air quality in general
• Technical Committee: CEN/SS S26 - Environmental Management
• Drafting Committee: CEN/SS S26 - Environmental Management
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Feb-2019
• Directive: 765/2008 - REGULATION (EC) No 765/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93
• Mandate: M/417 - Standardisation mandate addessed to CEN, CENELEC, and ETSI for the use of Harmonised Standards in support of the new legal framework and sectoral certification schemes
• Ref Project: SIST EN ISO 14064-1:2012 - Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006)

Relations

• Replaced By: EN ISO 14064-1:2019 - Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018)
• Effective Date: 13-Feb-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2012
7RSORJUHGQLSOLQLGHO6SHFLILNDFLMD]QDYRGLORP]DNROLþLQVNRGRORþDQMHLQ
SRURþDQMHRHPLVLMDKLQRGVWUDQMHYDQMXWRSORJUHGQLKSOLQRYQDUDYQLRUJDQL]DFLMH
,62
Greenhouse gases - Part 1: Specification with guidance at the organization level for
quantification and reporting of greenhouse gas emissions and removals (ISO 14064-
1:2006)
Treibhausgase - Teil 1: Spezifikation mit Anleitung zur quantitativen Bestimmung und
Berichterstattung von Treibhausgasemissionen und Entzug von Treibhausgasen auf
Organisationsebene (ISO 14064-1:2006)
Gaz à effet de serre - Partie 1: Spécifications et lignes directrices, au niveau des
organismes, pour la quantification et la déclaration des émissions et des suppressions
des gaz à effet de serre (ISO 14064-1:2006)
Ta slovenski standard je istoveten z: EN ISO 14064-1:2012
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14064-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 13.020.40
English Version
Greenhouse gases - Part 1: Specification with guidance at the
organization level for quantification and reporting of greenhouse
gas emissions and removals (ISO 14064-1:2006)
Gaz à effet de serre - Partie 1: Spécifications et lignes Treibhausgase - Teil 1: Spezifikation mit Anleitung zur
directrices, au niveau des organismes, pour la quantitativen Bestimmung und Berichterstattung von
quantification et la déclaration des émissions et des Treibhausgasemissionen und Entzug von Treibhausgasen
suppressions des gaz à effet de serre (ISO 14064-1:2006) auf Organisationsebene (ISO 14064-1:2006)
This European Standard was approved by CEN on 5 February 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14064-1:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 14064-1:2006 has been prepared by Technical Committee ISO/TC 207 “Environmental
management” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
14064-1:2012 by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14046-1:2006 has been approved by CEN as a EN ISO 14046-1:2012 without any
modification.
INTERNATIONAL ISO
STANDARD 14064-1
First edition
2006-03-01
Greenhouse gases —
Part 1:
Specification with guidance at the
organization level for quantification and
reporting of greenhouse gas emissions
and removals
Gaz à effet de serre —
Partie 1: Spécifications et lignes directrices, au niveau des organismes,
pour la quantification et la déclaration des émissions et des suppression
des gaz à effet de serre
Reference number
ISO 14064-1:2006(E)
©
ISO 2006
ISO 14064-1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
©
ii ISO 2006 – All rights reserved

ISO 14064-1:2006(E)
Contents Page
1 Scope . 1
2 Terms and definitions . 1
3 Principles . 6
3.1 General . 6
3.2 Relevance . 6
3.3 Completeness . 6
3.4 Consistency . 6
3.5 Accuracy . 6
3.6 Transparency . 6
4 GHG inventory design and development . 6
4.1 Organizational boundaries . 6
4.2 Operational boundaries . 7
4.3 Quantification of GHG emissions and removals . 8
5 GHG inventory components . 10
5.1 GHG emissions and removals . 10
5.2 Organizational activities to reduce GHG emissions or increase GHG removals . 10
5.3 Base-year GHG inventory . 11
5.4 Assessing and reducing uncertainty . 12
6 GHG inventory quality management . 12
6.1 GHG information management . 12
6.2 Document retention and record keeping . 12
7 Reporting of GHG . 13
7.1 General . 13
7.2 Planning the GHG report . 13
7.3 GHG report content . 13
8 Organization's role in verification activities . 14
8.1 General . 14
8.2 Preparing for verification . 14
8.3 Verification management . 15
Annex A (informative) Consolidating facility-level data to the organization level . 17
Annex B (informative) Examples of other indirect greenhouse gas emissions . 18
Annex C (informative) Greenhouse gas global warming potentials . 19
Bibliography . 20
©
ISO 2006 – All rights reserved iii

ISO 14064-1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14064-1 was prepared by Technical Committee ISO/TC 207, Environmental management.
ISO 14064 consists of the following parts, under the general title Greenhouse gases:
— Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse
gas emissions and removals
— Part2:Specification with guidance at the project level for quantification, monitoring and reporting of
greenhouse gas emission reductions or removal enhancements
— Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions
©
iv ISO 2006 – All rights reserved

ISO 14064-1:2006(E)
Introduction
0.1 Climate change has been identified as one of the greatest challenges facing nations, governments,
business and citizens over future decades. Climate change has implications for both human and natural
systems and could lead to significant changes in resource use, production and economic activity. In response,
international, regional, national and local initiatives are being developed and implemented to limit greenhouse
gas (GHG) concentrations in the Earth’s atmosphere. Such GHG intitiatives rely on the quantification,
monitoring, reporting and verification of GHG emissions and/or remov
...