Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

ISO 10218-2:2011 specifies safety requirements for the integration of industrial robots and industrial robot systems as defined in ISO 10218-1, and industrial robot cell(s). The integration includes the following:
       the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell;
       necessary information for the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell;
       component devices of the industrial robot system or cell.
ISO 10218-2:2011 describes the basic hazards and hazardous situations identified with these systems, and provides requirements to eliminate or adequately reduce the risks associated with these hazards. ISO 10218-2:2011 also specifies requirements for the industrial robot system as part of an integrated manufacturing system. ISO 10218-2:2011 does not deal specifically with hazards associated with processes (e.g. laser radiation, ejected chips, welding smoke). Other standards can be applicable to these process hazards.

Industrieroboter - Sicherheitsanforderungen - Teil 2: Robotersysteme und Integration (ISO 10218-2:2011)

Dieser Teil der ISO 10218 legt Sicherheitsanforderungen für die Integration von Industrierobotern und
Industrierobotersystemen, wie in ISO 10218-1 festgelegt, sowie von Industrieroboterzellen fest. Die
Integration beinhaltet:
a) die Konstruktion, Herstellung, Einbau, Betrieb, Instandhaltung und Außerbetriebnahme des
Industrierobotersystems oder der -zelle;
b) erforderliche Informationen in Bezug auf a) oben;
c) Einzelgeräte des Industrierobotersystems oder -zelle
Er beschreibt die grundlegenden Gefährdungen und Gefährdungssituationen, die bei diesen Systemen
ermittelt wurden und sieht Anforderungen vor, um die mit diesen Gefährdungen verbundenen Risiken zu
beseitigen oder hinreichend zu verringern. Dieser Teil der ISO 10218 legt auch Anforderungen für das
Industrierobotersystem als Teil eines integrierten Fertigungssystems fest. Dieser Teil der ISO 10218 geht
nicht gezielt auf Gefährdungen in Verbindung mit Verfahren ein (z. B. Laserstrahlung, herausgeschleuderte
Späne, Schweißrauch) Für diese verfahrensbezogene Gefährdungen können andere Normen angewendet
werden.

Robots et dispositifs robotiques - Exigences de sécurité pour les robots industriels - Partie 2: Systèmes robots et intégration (ISO 10218-2:2011)

L'ISO 10218-2:2011 spécifie les exigences de sécurité pour l'intégration des robots industriels et des systèmes robots industriels tels que définis dans l'ISO 10218-1, et de la (ou des) cellule(s) robotisées industrielles. L'intégration inclut
la conception, la fabrication, l'installation, le fonctionnement, la maintenance et le démantèlement du système robot industriel ou de la cellule robotisée industrielle,
l'information nécessaire pour la conception, la fabrication, l'installation, le fonctionnement, la maintenance et le démantèlement du système robot industriel ou de la cellule robotisée industrielle, et
les composants du système robot industriel ou de la cellule robotisée industrielle.
L'ISO 10218-2:2011 décrit les phénomènes dangereux de base et les situations dangereuses identifiés avec ces systèmes, et fournit des exigences pour éliminer ou réduire de façon correcte les risques liés à ces phénomènes dangereux. L'ISO 10218-2:2011 spécifie également des exigences pour le système robot industriel en tant qu'élément d'un système de fabrication intégré. L'ISO 10218-2:2011 ne traite pas spécifiquement des phénomènes dangereux liés aux processus (par exemple rayonnement laser, éjection de copeaux, fumée de soudage). D'autres normes peuvent être appliquées pour le traitement de ces phénomènes dangereux.

Roboti in robotske naprave - Varnostne zahteve za industrijske robote - 2. del: Robotski sistem in integracija v proizvodno linijo (ISO 10218-2:2011)

Ta del ISO 10218 določa varnostne zahteve za integracijo industrijskih robotov in industrijskih robotskih sistemov, kot so opredeljeni v ISO 10218-1, ter industrijskih robotskih celic. Integracija vključuje: a) načrtovanje, izdelavo, vgradnjo, obratovanje, vzdrževanje in umik iz obratovanja industrijskega robotskega sistema ali celice; b) potrebne informacije za načrtovanje, izdelavo, vgradnjo, obratovanje, vzdrževanje in umik iz obratovanja industrijskega robotskega sistema ali celice; c) sestavne pripomočke industrijskega robotskega sistema ali celice. Ta del ISO 10218 opisuje osnovne nevarnosti in nevarne situacije, identificirane pri teh sistemih, in podaja zahteve za preprečevanje ali ustrezno zmanjševanje tveganj, povezanih s temi nevarnostmi. Čeprav je hrup identificiran kot pomembna nevarnost pri industrijskih robotskih sistemih, ga ta del ISO 10218 ne obravnava. Ta del ISO 10218 tudi določa zahteve za industrijski robotski sistem, ki je del integriranega proizvodnega sistema. Ta del ISO 10218 ne obravnava posebej nevarnosti, povezanih s procesi (npr. laserskega sevanja, izmetavanja sekancev, dima pri varjenju). Za take procesne nevarnosti se lahko uporabijo drugi standardi.

General Information

Status
Published
Publication Date
30-Jun-2011
Withdrawal Date
30-Jan-2012
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Jul-2011
Completion Date
01-Jul-2011

Relations

Buy Standard

Standard
EN ISO 10218-2:2011
English language
82 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10218-2:2008
English language
96 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Roboti in robotske naprave - Varnostne zahteve za industrijske robote - 2. del: Robotski sistem in integracija v proizvodno linijo (ISO 10218-2:2011)Roboter und Robotikgeräte - Sicherheitsanforderungen - Teil 2: Industrierobotersystem und Integration (ISO 10218-2:2011)Robots et dispositifs robotiques - Exigences de sécurité pour les robots industriels - Partie 2: Systèmes robots et intégration (ISO 10218-2:2011)Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)25.040.30Industrijski roboti. ManipulatorjiIndustrial robots. ManipulatorsICS:Ta slovenski standard je istoveten z:EN ISO 10218-2:2011SIST EN ISO 10218-2:2011en01-september-2011SIST EN ISO 10218-2:2011SLOVENSKI
STANDARD



SIST EN ISO 10218-2:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10218-2
July 2011 ICS 25.040.30 English Version
Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
Robots et dispositifs robotiques - Exigences de sécurité pour les robots industriels - Partie 2: Systèmes robots et intégration (ISO 10218-2:2011)
Roboter und Robotikgeräte - Sicherheitsanforderungen - Teil 2: Industrierobotersystem und Integration (ISO 10218-2:2011) This European Standard was approved by CEN on 21 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10218-2:2011: ESIST EN ISO 10218-2:2011



EN ISO 10218-2:2011 (E) 2 Contents Page Foreword .3Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .4 SIST EN ISO 10218-2:2011



EN ISO 10218-2:2011 (E) 3 Foreword This document (EN ISO 10218-2:2011) has been prepared by Technical Committee ISO/TC 184 "Automation systems and integration" in collaboration with Technical Committee CEN/TC 310 “Advanced automation technologies and their applications” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10218-2:2011 has been approved by CEN as a EN ISO 10218-2:2011 without any modification.
SIST EN ISO 10218-2:2011



EN ISO 10218-2:2011 (E) 4 Annex ZA (informative)
Re
...

SLOVENSKI STANDARD
oSIST prEN ISO 10218-2:2008
01-september-2008
Roboti za industrijska okolja - Varnostne zahteve - 2. del: Robotski sistem in
integracija
Robots for industrial environments - Safety requirements -- Part 2: Robot cell and line
Industrieroboter - Sicherheitsanforderungen - Teil 2 - Robotersystem und Integration
Robots pour environnements industriels - Exigences de sécurité - Partie 2: Système
robot et intégration
Ta slovenski standard je istoveten z: prEN ISO 10218-2
ICS:
25.040.30 Industrijski roboti. Industrial robots.
Manipulatorji Manipulators
oSIST prEN ISO 10218-2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10218-2:2008

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10218-2:2008
EUROPEAN STANDARD
DRAFT
prEN ISO 10218-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 25.040.30 Will supersede EN 775:1992
English Version
Robots for industrial environments - Safety requirements - Part
2: Robot system and integration (ISO/DIS 10218-2:2008)
Robots pour environnements industriels - Exigences de Industrieroboter - Sicherheitsanforderungen - Teil 2:
sécurité - Partie 2: Système robot et intégration (ISO/DIS Robotersystem und Integration (ISO/DIS 10218-2:2008)
10218-2:2008)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 310.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 10218-2:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10218-2:2008
prEN ISO 10218-2:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10218-2:2008
prEN ISO 10218-2:2008 (E)
Foreword
This document (prEN ISO 10218-2:2008) has been prepared by Technical Committee ISO/TC 184 "Industrial
automation systems and integration" in collaboration with Technical Committee CEN/TC 310 “Advanced
Manufacturing Technologies” the secretariat of which is held by BSI.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN 775:1992.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
Endorsement notice
The text of ISO/DIS 10218-2:2008 has been approved by CEN as a prEN ISO 10218-2:2008 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 10218-2:2008

---------------------- Page: 6 ----------------------
oSIST prEN ISO 10218-2:2008
DRAFT INTERNATIONAL STANDARD ISO/DIS 10218-2
ISO/TC 184/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2008-07-17 2008-12-17
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Robots for industrial environments — Safety requirements —
Part 2:
Robot system and integration
Robots pour environnements industriels — Exigences de sécurité —
Partie 2: Système robot et intégration
ICS 25.040.30

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secret
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.