EN 1396:2007

Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm.
It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process, either in the final width or slit afterwards, and to sheet obtained from such strip.
It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.

Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen

Diese Europäische Norm legt die besonderen Anforderungen an bandbeschichtete Bleche und Bänder aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest. Diese Erzeugnisse werden üblicher¬weise in Dicken bis 3,0 mm geliefert.
Sie gilt für kaltgewalzte Bänder aus Aluminium und Aluminiumlegierungen, die durch ein Band¬beschichtungs¬verfahren beschichtet werden, in Endbreite oder nach der Beschichtung längsgeteilt werden, bzw. für Bleche, die aus diesen Bändern hergestellt werden.
Sie gilt nicht für Sonderanwendungen dieser bandbeschichteten Bleche und Bänder wie beispielsweise Dosen, Verschlüsse und Deckel, die in EN 541 behandelt werden.

Aluminium et alliages d'aluminium - Tôles et bandes revêtues en bobine pour applications générales - Spécifications

Ce document spécifie les exigences particulières relatives aux tôles et bandes en aluminium et alliages d'aluminium corroyés prérevêtues en bobine pour applications générales. Le produit est généralement fourni en épaisseur allant jusqu'à 3,0 mm.
Elle s'applique aux bandes en aluminium et alliages d'aluminium laminées à froid, prérevêtues en largeur finale par le procédé de revêtement en bobine ou refendues après revêtement, ainsi qu'aux tôles obtenues à partir de ces bandes.
Elle ne s'applique pas aux tôles et bandes prérevêtues en bobines et utilisées pour des applications particulières tels que les produits laminés pour boîtes, capsules rigides et couvercles, qui font l'objet de l'EN 541.

Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za splošno uporabo - Specifikacije

General Information

• Status: Withdrawn
• Publication Date: 23-Jan-2007
• Withdrawal Date: 31-Mar-2015
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 7 - Sheets, strips and plates
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Apr-2015
• Ref Project: SIST EN 1396:2007 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

Relations

• Replaces: EN 1396:1996 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
• Effective Date: 22-Dec-2008
• Replaced By: EN 1396:2015 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
• Effective Date: 08-Apr-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - SpecificationsAluminium et alliages d'aluminium - Tôles revetues en bobine pour applications générales - SpécificationsAluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - SpezifikationenTa slovenski standard je istoveten z:EN 1396:2007SIST EN 1396:2007en77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 1396:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1396:200701-april-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1396January 2007ICS 77.150.10Supersedes EN 1396:1996
English VersionAluminium and aluminium alloys - Coil coated sheet and strip forgeneral applications - SpecificationsAluminium et alliages d'aluminium - Tôles revêtues enbobine pour applications générales - SpécificationsAluminium und Aluminiumlegierungen - BandbeschichteteBleche und Bänder für allgemeine Anwendungen -SpezifikationenThis European Standard was approved by CEN on 7 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1396:2007: E

Rules for rounding.19 Annex B (informative)
Examples of coating systems.20 Annex C (normative)
Guidelines for the specification of organic coating requirements.21 Annex D (informative)
Guidelines for storage and subsequent processing.27 Annex E (normative)
Chemical composition of aluminium alloys EN AW-5006 and EN AW-6025.29 Bibliography.30 Figures Figure 1 — Direction of winding.17 Figure C.1.22 Tables Table 1 — Symbol and typical thickness or thickness ranges of the more common coating materials (for information only).10 Table 2 — Mechanical properties after coating.13 Table 3 — Tolerances on total thickness of the organic coating.15 Table 4 — Tolerances on gloss.15 Table C.1 — Recommendations for selection of coil coated material.24 Table C.2 — Expected performance on panel exposed in Hendaye/H.v.Holland.24 Table C.3 — Expected performance of panel exposed in Florida/Portugal.25 Table C.4 — Maximum values for average undercreep and face blistering after accelerated corrosion testing.25 Table E.1 — Chemical composition of aluminium alloys EN AW-5006 and EN AW-6025.29

Update of normative references in the whole document Table 1:
New coating material added - Fluorpolymer Table 2:
New alloys added - EN AW-3104, EN AW-5006, EN AW-5010 and EN AW-6025 Table 4:
Gloss unit range "21 to 40" subdivided in "21 to 30" and "31 to 40" Annex E:
Added Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

combination of properties required. It is therefore not practicable to specify in detail minimum requirements for all properties for all types of products. Minimum requirements not specified in this European Standard and deemed necessary for a successful use of the product should be agreed between manufacturer and purchaser at the time of ordering, using, as
appropriate, the guidelines given in Annex C. Guidelines for proper storage and subsequent processing of organic coated aluminium flat products are given in Annex D.

subsequently cured, or  laminating with plastic films 3.6 organic coating dry paint film of the coated product or the organic film of the organic film/metal laminate [EN 12258-1:1998] 3.7 top side side of the strip with the highest decorative demand and which, in normal production is uppermost. For strip supplied in coil form, the top side is normally the outside of the coil. For sheet supplied in stacks or bundles the top side is normally up
...