EN 10025-5:2004

Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

Part 5 of this European Standard, in addition to Part 1, specifies requirements for flat and long products of hot rolled steels with improved atmospheric corrosion resistance in the grades and qualities given in Tables 2 and 3 (chemical composition) and Tables 4 and 5 (mechanical properties) in the usual delivery conditions as given in 6.3.
The thicknesses in which products of the steel grades and qualities specified in this European Standard may be supplied are given in Table 1.
In addition to prEN 10025-1:2003 the steels specified in this European Standard are especially intended for use in welded, bolted and riveted components which shall have enhanced resistance to atmospheric corrosion, for service at ambient temperatures (subject to the restrictions described in 7.4.1).
The steels specified in this Part 5 are not intended to be heat treated except products delivered in the delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of prEN 10025-1:2003). Products delivered in +N condition can be hot formed and/or normalized after delivery (see clause 3).

Warmgewalzte Erzeugnisse aus Baustählen - Teil 5: Technische Lieferbedingungen für wetterfeste Baustähle

Teil 5 dieses Dokumentes legt � zusätzlich zu Teil 1 � die Anforderungen fest für Flach- und Langerzeugnisse aus
wetterfesten Baustählen in den Sorten und Gütegruppen nach den Tabellen 2 und 3 (chemische
Zusammensetzung) und den Tabellen 4 und 5 (mechanische Eigenschaften) im üblichen Lieferzustand nach 6.3.
Die lieferbaren Dicken der Erzeugnisse aus den in diesem Dokument erfassten Sorten und Gütegruppen sind in
Tabelle 1 angegeben.
Zusätzlich zu EN 10025-1:2004 sind die in diesem Dokument erfassten Stähle (mit den Einschränkungen nach
7.4.1) vorwiegend für die Verwendung bei Umgebungstemperaturen in geschweißten, geschraubten und
genieteten Bauteilen bestimmt, die einen erhöhten Widerstand gegen atmosphärische Korrosion aufweisen sollen.
Die in diesem Teil 5 erfassten Stähle sind, mit Ausnahme der Erzeugnisse im Lieferzustand +N, nicht für eine
Wärmebehandlung vorgesehen. Spannungsarmglühen ist zulässig (siehe auch die Anmerkung in
EN 10025-1:2004, 7.3.1.1). Im Zustand +N gelieferte Erzeugnisse dürfen nach der Lieferung warm umgeformt
und/oder normalgeglüht werden (siehe Abschnitt 3).

Produits laminés à chaud en aciers de construction - Partie 5: Conditions techniques de livraison pour les aciers de construction à résistance améliorée à la corrosion atmosphérique

Vroče valjani izdelki iz konstrukcijskih jekel – 5. del: Tehnični dobavni pogoji za konstrukcijska jekla z izboljšano odpornostjo proti atmosferski koroziji

General Information

• Status: Withdrawn
• Publication Date: 09-Nov-2004
• Withdrawal Date: 13-Aug-2019
• ICS: 77.140.10 - Heat-treatable steels
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10 - Structural steels - Qualities
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 14-Aug-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Mandate: M/BC/CEN/87/15 - ECISS - 2nd programme
• Ref Project: SIST EN 10025-5:2005 - Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

Relations

• Replaces: EN 10155:1993 - Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions
• Effective Date: 22-Dec-2008
• Replaced By: EN 10025-5:2019 - Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
• Effective Date: 21-Aug-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RUR]LMLWarmgewalzte Erzeugnisse aus Baustählen - Teil 5: Technische Lieferbedingungen für wetterfeste BaustähleProduits laminés a chaud en aciers de construction - Partie 5: Conditions techniques de livraison pour les aciers de construction a résistance améliorée a la corrosion atmosphériqueHot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance77.140.50SROL]GHONLFlat steel products and semi-products77.140.10Jekla za toplotno obdelavoHeat-treatable steelsICS:Ta slovenski standard je istoveten z:EN 10025-5:2004SIST EN 10025-5:2005en01-januar-2005SIST EN 10025-5:2005SLOVENSKI
STANDARDSIST EN 10155:19981DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10025-5
November 2004 ICS 77.140.10; 77.140.50
Supersedes EN 10155:1993
English version
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Produits laminés à chaud en aciers de construction -Partie 5: Conditions techniques de livraison pour les aciers de construction à résistance améliorée à la corrosion atmosphérique
Warmgewalzte Erzeugnisse aus Baustählen - Teil 5: Technische Lieferbedingungen für wetterfeste Baustähle This European Standard was approved by CEN on 1 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10025-5:2004: ESIST EN 10025-5:2005

List of corresponding former designations.22 Annex B (informative)
List of national standards which correspond with EURONORMS referenced.23 Annex C (informative)
Additional information for the use of steel with improved atmospheric corrosion resistance.24 Annex D (informative)
Notes on fabrication.25 Bibliography.26
...