EN ISO 11553-1:2008
(Main)Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
ISO 11553-1:2005 describes hazards generated by laser processing machines, and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturers of such equipment.
Requirements dealing with noise as a hazard from laser processing machines are not included in ISO 11553-1:2005. They will be included in a subsequent amendment.
ISO 11553-1:2005 is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications: photolithography, stereolithography, holography, medical applications and data storage.
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1: Allgemeine Sicherheitsanforderungen (ISO 11553-1:2005)
Dieser Teil von ISO 11553 beschreibt Gefährdungen, die durch Laserbearbeitungsmaschinen nach 3.2 hervorgerufen werden, und legt nur die Sicherheitsanforderungen hinsichtlich elektro-magnetischer Strahlungs¬gefährdungen und durch Materialien und Substanzen erzeugter Gefährdungen fest. Er legt auch die Informationen fest, die von den Herstellern solcher Anlagen mitgeliefert werden müssen.
Anforderungen an die Beseitigung oder Verminderung von Risiken durch Lärm sind nicht in dieser Norm enthalten. Diese Anforderungen sollen in einer späteren Änderung eingeführt werden.
Er ist nicht anwendbar auf Laserprodukte oder Einrichtungen, die solche Produkte beinhalten, die alleinig und ausdrücklich für die folgenden Anwendungen hergestellt werden:
Photolithographie;
Stereolithographie;
Holographie;
Medizinische Anwendungen (nach IEC 60601-2-22);
Datenspeicherung.
Sécurité des machines - Machines à laser - Partie 1: Prescriptions générales de sécurité (ISO 11553-1:2005)
L'ISO 11553-1:2005 décrit les phénomènes dangereux engendrés par les machines à laser et spécifie les prescriptions de sécurité concernant les risques de rayonnement et les risques engendrés par les matériaux et les substances. Elle indique également les renseignements que doivent fournir les fabricants de ces matériels.
Les exigences relatives au bruit considéré comme un risque des machines à laser ne sont pas comprises dans l'ISO 11553-1:2005. Elles seront incluses dans un amendement ultérieur.
L'ISO 11553-1:2005 ne s'applique pas aux appareils à laser ni aux équipements contenant ces appareils, fabriqués exclusivement et expressément pour les applications suivantes: photolithographie, stéréolithographie, holographie, applications médicales, et mise en mémoire de données.
Varnost strojev - Laserski obdelovalni stroji - 1. del: Splošne varnostne zahteve (ISO 11553-1:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11553-1:2009
01-marec-2009
1DGRPHãþD
SIST EN ISO 11553-1:2005
Varnost strojev - Laserski obdelovalni stroji - 1. del: Splošne varnostne zahteve
(ISO 11553-1:2005)
Safety of machinery - Laser processing machines - Part 1: General safety requirements
(ISO 11553-1:2005)
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1: Allgemeine
Sicherheitsanforderungen (ISO 11553-1:2005)
Sécurité des machines - Machines à laser - Partie 1: Prescriptions générales de sécurité
(ISO 11553-1:2005)
Ta slovenski standard je istoveten z: EN ISO 11553-1:2008
ICS:
13.110 Varnost strojev Safety of machinery
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11553-1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11553-1:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 11553-1:2009
EUROPEAN STANDARD
EN ISO 11553-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 13.110; 31.260 Supersedes EN ISO 11553-1:2005
English Version
Safety of machinery - Laser processing machines - Part 1:
General safety requirements (ISO 11553-1:2005)
Sécurité des machines - Machines à laser - Partie 1: Sicherheit von Maschinen - Laserbearbeitungsmaschinen -
Prescriptions générales de sécurité (ISO 11553-1:2005) Teil 1: Allgemeine Sicherheitsanforderungen (ISO 11553-
1:2005)
This European Standard was approved by CEN on 7 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11553-1:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11553-1:2009
EN ISO 11553-1:2008 (E)
Contents Page
Foreword.3
Annex ZA (informative) Clauses of this European Standard addressing essential requirements or
other provisions of EU directives 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11553-1:2009
EN ISO 11553-1:2008 (E)
Foreword
The text of ISO 11553-1:2005 has been prepared by Technical Committee ISO/TC 172 “Optics and optical
instruments” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11553-1:2008 by Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the
latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11553-1:2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA and Annex ZB, which are integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.