EN ISO 4210-1:2023
(Main)Cycles - Safety requirements for bicycles - Part 1: Vocabulary (ISO 4210-1:2023)
Cycles - Safety requirements for bicycles - Part 1: Vocabulary (ISO 4210-1:2023)
This document specifies terms and definitions related to safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies having maximum saddle height 635 mm or more.
This document does not apply to specialized types of bicycle such as delivery bicycles, recumbent bicycles, tandems, BMX bicycles, and bicycles designed and equipped for use in severe applications such as sanctioned competition events, stunting, or aerobatic manoeuvres.
NOTE For bicycles with a maximum saddle height of 435 mm or less, see national regulations for ride-on toys, and with a maximum saddle height of more than 435 mm and less than 635 mm, see ISO 8098.
Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 1: Begriffe (ISO 4210-1:2023)
Dieses Dokument legt Begriffe in Bezug auf sicherheitstechnische und leistungsbezogene Anforderungen an konstruktive Ausführung, Zusammenbau und Prüfung von Fahrrädern und Baugruppen fest, die über eine maximale Sattelhöhe von 635 mm oder mehr verfügen.
Dieses Dokument gilt nicht für spezialisierte Fahrradtypen wie Lastenfahrräder, Liegefahrräder, Tandems, BMX Fahrräder und Fahrräder, die für harte Anwendungen wie genehmigte Wettbewerbsveranstaltungen, Trickfahrten oder Kunstsprungfiguren ausgelegt und ausgerüstet sind.
ANMERKUNG Bei Fahrrädern mit einer maximalen Sattelhöhe von 435 mm oder weniger siehe nationale Bestimmungen für Aufsitzspielzeug und bei einer maximalen Sattelhöhe von mehr als 435 mm und weniger als 635 mm siehe ISO 8098 [1].
Cycles - Exigences de sécurité pour les bicyclettes - Partie 1: Vocabulaire (ISO 4210-1:2023)
Kolesa - Varnostne zahteve za kolesa - 1. del: Slovar (ISO 4210-1:2023)
Ta dokument določa izraze in definicije v zvezi z varnostnimi in tehničnimi zahtevami za zasnovo, sestavo in preskušanje koles in njihovih podsestavov z maksimalno višino sedeža, ki presega 635 mm.
Ta dokument se ne uporablja za specializirane vrste koles, na primer dostavna kolesa, ležeča kolesa, tandemska kolesa, kolesa BMX in kolesa, zasnovana in opremljena za uporabo v zahtevnih pogojih, na primer na sankcioniranih tekmovanjih, za izvajanje trikov in akrobacij.
OPOMBA: Za kolesa z maksimalno višino sedeža 435 mm ali manj glej nacionalne predpise za otroška igralna vozila, za kolesa z maksimalno višino sedeža najmanj 435 mm in največ 635 mm pa glej standard ISO 8098.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4210-1:2023
01-april-2023
Nadomešča:
SIST EN ISO 4210-1:2014
Kolesa - Varnostne zahteve za kolesa - 1. del: Slovar (ISO 4210-1:2023)
Cycles - Safety requirements for bicycles - Part 1: Vocabulary (ISO 4210-1:2023)
Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 1: Begriffe (ISO
4210-1:2023)
Cycles - Exigences de sécurité pour les bicyclettes - Partie 1: Vocabulaire (ISO 4210-
1:2023)
Ta slovenski standard je istoveten z: EN ISO 4210-1:2023
ICS:
01.040.43 Cestna vozila (Slovarji) Road vehicle engineering
(Vocabularies)
43.150 Kolesa Cycles
SIST EN ISO 4210-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4210-1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 4210-1:2023
EN ISO 4210-1
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2023
EUROPÄISCHE NORM
ICS 43.150 Supersedes EN ISO 4210-1:2014
English Version
Cycles - Safety requirements for bicycles - Part 1:
Vocabulary (ISO 4210-1:2023)
Cycles - Exigences de sécurité pour les bicyclettes - Fahrräder - Sicherheitstechnische Anforderungen an
Partie 1: Vocabulaire (ISO 4210-1:2023) Fahrräder - Teil 1: Begriffe (ISO 4210-1:2023)
This European Standard was approved by CEN on 13 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4210-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4210-1:2023
EN ISO 4210-1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4210-1:2023
EN ISO 4210-1:2023 (E)
European foreword
This document (EN ISO 4210-1:2023) has been prepared by Technical Committee ISO/TC 149 "Cycles"
in collaboration with Technical Committee CEN/TC 333 “Cycles” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2023, and conflicting national standards shall be
withdrawn at the latest by July 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4210-1:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4210-1:2023 has been approved by CEN as EN ISO 4210-1:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4210-1:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 4210-1:2023
INTERNATIONAL ISO
STANDARD 4210-1
Second edition
2023-01
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.