iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 683-17:1999

(Main)

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999)

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Update TC Report 1998-04-02

Für eine Wärmebehandlung bestimmte Stähle, legierte Stähle und Automatenstähle - Teil 17: Wälzlagerstähle (ISO 683-17:1999)

1.1 Dieser Teil von ISO 683 gilt für die in Tabelle 1 angegebenen Erzeugnisse und Wärmebehandlungßustände und die Oberflächenzustände nach Tabelle 2. 1.2 Dieser Teil von ISO 683 enthält die technischen Lieferbedingungen für fünf Gruppen von Wälzlagerstählen, wie in Tabelle 3 aufgeführt, nämlich: a) durchhärtende Wälzlagerstähle (Stähle mit ungefähr 1% C und 1% bis 2% Cr), b) einsatzhärtende Wälzlagerstähle, c) induktionshärtende Wälzlagerstähle (unlegiert und legiert), d) nichtrostende Wälzlagerstähle, e) warmharte Wälzlagerstähle.

Aciers pour traitement thermique, aciers alliés et aciers pour décolletage - Partie 17: Aciers pour roulements (ISO 683-17:1999)

La présente partie de l'SO 683 donne les prescriptions techniques de livraison s'appliquant à cinq groupes d'aciers corroyés pour roulements dont la liste figure au tableau 3, à savoir:a) aciers pour roulements trempés à coeur (aciers contenant environ 1 % de C et 1 % à 2 % de Cr);b) aciers de cémentation pour roulements,c) aciers pour trempe par induction (non alliés et alliés) pour roulements;d) aciers inoxydables pour roulements;e) aciers pour roulements résistant à chaud.Dans certains cas particuliers, des variations ou compléments par rapport à ces prescriptions techniques de livraison peuvent faire l'objet d'un accord au moment de l'appel d'offres et de la commande (voir annexe A).En plus de la présente partie de l'SO 683, les conditions générales techniques de livraison de l'ISO 404 s'appliquent.

Toplotno obdelana jekla, legirana in avtomatna jekla - 17. del: Jekla za kroglične in valjčne ležaje (ISO 683-17:1999)

General Information

Status
Withdrawn
Publication Date
14-Oct-1999
Withdrawal Date
28-Oct-2014
ICS
77.140.10 - Heat-treatable steels
77.140.20 - Stainless steels
Technical Committee
ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
Drafting Committee
ECISS/TC 23 - Steels for heat treatment, alloy steels and free-cutting steels - Qualities
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Oct-2014
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN ISO 683-17:2000 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999)

Relations

Replaced By
EN ISO 683-17:2014 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
Effective Date
05-Nov-2014

Buy Standard

EN ISO 683-17:2000EN ISO 683-17:2000
PreviousNext
Standard
EN ISO 683-17:2000
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 683-17:2000
01-november-2000
7RSORWQRREGHODQDMHNODOHJLUDQDLQDYWRPDWQDMHNODGHO-HNOD]DNURJOLþQHLQ
YDOMþQHOHåDMH ,62
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing
steels (ISO 683-17:1999)
Für eine Wärmebehandlung bestimmte Stähle, legierte Stähle und Automatenstähle -
Teil 17: Wälzlagerstähle (ISO 683-17:1999)
Aciers pour traitement thermique, aciers alliés et aciers pour décolletage - Partie 17:
Aciers pour roulements (ISO 683-17:1999)
Ta slovenski standard je istoveten z: EN ISO 683-17:1999
ICS:
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.20 Visokokakovostna jekla Stainless steels
SIST EN ISO 683-17:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 683-17:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 683-17:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 683-17:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 683-17:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 683-17:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 683-17:2000
INTERNATIONAL ISO
STANDARD 683-17
Second edition
1999-10-15
Heat-treated steels, alloy steels
and free-cutting steels —
Part 17:
Ball and roller bearing steels
Aciers pour traitement thermique, aciers alliés et aciers pour décolletage —
Partie 17: Aciers pour roulements
A
Reference number
ISO 683-17:1999(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 683-17:2000
ISO 683-17:1999(E)
Contents
Page
1 Scope .1
2 Normative references .1
3 Terms and definitions .2
4 Ordering and designation .2
5 Requirements.3
6 Inspection, testing and conformance of products .5
7 Marking .6
Annex A (normative) Supplementary or special requirements .15
Annex B (informative) Content of microscopic non-metallic inclusions.17
Annex C (informative) Designations of comparable steels.19
Bibliography.20
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 683-17:2000
© ISO
ISO 683-17:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 683-17:2023(Main)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
SIST EN ISO 683-17:2023

This document specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels as listed in Table 3, namely
—     through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr),
—     case-hardening bearing steels,
—     induction-hardening bearing steels (unalloyed and alloyed),
—     stainless bearing steels, and
—     high-temperature bearing steels.
This document is applicable to the products and heat-treatment conditions given in Table 1 and the surface conditions given in Table 2.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-3:2022(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
SIST EN ISO 683-3:2022

This document specifies the technical delivery requirements for
—    semi-finished products, hot formed (e.g. blooms, billets, slabs) (see NOTE 1),
—    bars (see NOTE 1),
—    wire rod,
—    finished flat products, and
—    hammer or drop forgings (see NOTE 1)
manufactured from the case-hardening non-alloy or alloy steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of case-hardened machine parts.
NOTE 1   Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammerforged bars are covered under semi-finished products or bars and not under the term “hammer and drop forgings”.
NOTE 2   For International Standards relating to steels conforming with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-5:2021(Main)
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
SIST EN ISO 683-5:2021

ISO 683-5:2017 gives the technical delivery requirements for
-      semi-finished products, e.g. blooms, billets, slabs (see note 1),
-      bars (see note 1),
-      wire rod,
-      hot-rolled plates (see note 2), and
-      hammer or drop forgings (see note 1)
manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2.
The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts.
The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       The term "plate" includes in the following also wide flats unless otherwise stated.
In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to this document, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4957:2018(Main)
Tool steels (ISO 4957:2018)
SIST EN ISO 4957:2018

This document specifies requirements for the following grades of wrought tool steels:
a)    non-alloy cold-work tool steels;
b)    alloy cold-work tool steels;
c)    alloy hot-work tool steels;
d)    high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE       Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-1:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
SIST EN ISO 683-1:2018

ISO 683-1:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
-      finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 9 and 11), but can also be partly used in the normalized condition (see Table 10).
The requirements for mechanical properties given in ISO 683-1:2016 are restricted to the sizes given in Tables 9 and 10.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are, in the following, covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-1 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement between the manufacturer and purchaser at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-1:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-2:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
SIST EN ISO 683-2:2018

ISO 683-2:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
       finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 8 and 9).
The requirements for mechanical properties given in ISO 683-2:2016 are restricted to the sizes given in the relevant Table 8.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-2 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-2:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-4:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016)
SIST EN ISO 683-4:2018

ISO 683-4:2016 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars and wire rod, manufactured from the free-cutting steels listed in Table 2 and supplied in one of the treatment conditions given for the different types of products in Table 1, rows 2 to 4.
It covers three groups of free-cutting steels for mechanical purposes as listed in Table 2, namely
a)    not intended for heat treatment,
b)    suitable for case-hardening, and
c)    suitable for quenching and tempering.
Free-cutting steels are often used as bright bars. For these products, refer to ISO 683‑18.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-4:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-17:2023(Main)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
SIST EN ISO 683-17:2023

This document specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels as listed in Table 3, namely
—     through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr),
—     case-hardening bearing steels,
—     induction-hardening bearing steels (unalloyed and alloyed),
—     stainless bearing steels, and
—     high-temperature bearing steels.
This document is applicable to the products and heat-treatment conditions given in Table 1 and the surface conditions given in Table 2.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-3:2022(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
SIST EN ISO 683-3:2022

This document specifies the technical delivery requirements for
—    semi-finished products, hot formed (e.g. blooms, billets, slabs) (see NOTE 1),
—    bars (see NOTE 1),
—    wire rod,
—    finished flat products, and
—    hammer or drop forgings (see NOTE 1)
manufactured from the case-hardening non-alloy or alloy steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of case-hardened machine parts.
NOTE 1   Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammerforged bars are covered under semi-finished products or bars and not under the term “hammer and drop forgings”.
NOTE 2   For International Standards relating to steels conforming with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day