EN 10163-1:1991

Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General requirements

1.1 This European Standard specifies the general requirements for the surface condition of the hot-rolled steel plates, wide flats and sections. It covers the requirements on the type, the permissible depth and the permissible size of the surface area affected by:  - discontinuities (impefections and defects) and - repairs by grinding and/or welding.  1.2 This European Standard shall be applied so far as no other requirements for the surface condition exist in the appropriate material or product standard. The requirements laid down in the appropriate material or product standard shall always prevail.  1.3 This  part 1 covers the general delivery requirements for the surface quality of host rolled steel products such as:  - Plates and wide flats, see part 2; - Sections, see part 3.

Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm enthält die allgemeinen Anforderungen an die Oberflächenbeschaffenheit von warmgewalztem Blech und Breitflachstahl sowie von warmgewalzten Profilen aus Stahl. Sie gilt für die Anforderungen an die Art, die zulässige Tiefe und zulässige Grösse der beeinflussten Oberflächenzone bei : - Ungänzen (Unvollkommenheiten und Fehler) und - Ausbesserungen durch Schleifen und/oder Schweissen.

Conditions de livraison relatives à l'état de surface des tôles, larges plats et profilés en acier laminés à chaud - Partie 1: Généralités

La présente norme européenne définit les conditions générales qui s'appliquent à l'état de surface des tôles, larges-plats et profilés en acier laminés à chaud. Elle concerne le type, la profondeur et la surface admissible des : - disontinuités de surface (imperfections et défauts), - réparations par meulage et/ou par soudage.

Dobavni pogoji za videz površine vroče valjanih jeklenih pločevin in profilov - 1. del: Splošni pogoji

General Information

• Status: Withdrawn
• Publication Date: 20-Aug-1991
• Withdrawal Date: 07-Dec-2004
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10 - Structural steels - Qualities
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Dec-2004
• Completion Date: 08-Dec-2004
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/87/15 - ECISS - 2nd programme
• Ref Project: SIST EN 10163-1:1997 - Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General requirements

Relations

• Replaced By: EN 10163-1:2004 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 1: Allgemeine AnforderungenConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 1: GénéralitésDelivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General req
...