Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles

This European Standard specifies the characteristics of decking profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external use.
This part of EN 15534 is applicable to extruded profiles but also to tiles manufactured by other plastics processing techniques, e.g. injection moulding.
It is not applicable to kits (i.e. support rail profiles, cover strip profiles and hardware) which are out of the scope of this part of EN 15534.
EN 15534 1 specifies the test methods relevant to this part of EN 15534.
NOTE 1   For load bearing applications, modification factors for bending properties are defined in CEN/TS 15534-2 [1].
NOTE 2   For editorial reasons, in EN 15534 the abbreviation "WPC" is used for "composites made from cellulose-based materials and thermoplastics".

Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) - Teil 4: Anforderungen an Profile und Formteile für Bodenbeläge

Diese Europäische Norm legt die Eigenschaften von Profilen und Formteilen für Bodenbeläge, die aus cellulosehaltigen Materialien und Thermoplasten hergestellt sind, üblicherweise Holz-Polymer-Werkstoffe (WPC, en: wood-polymer composites) oder Naturfaserverbundwerkstoffe (NFC, en: natural fibre composites) genannt, für Anwendungen im Außenbereich fest.
Dieser Teil von EN 15534 gilt für extrudierte Profile, sowie für Formteile, die durch andere Kunststoffverarbeitungs-Verfahren, z. B. Spritzguss, hergestellt wurden.
Dieser Teil gilt nicht für Bausätze (d. h. Unterkonstruktionen, Profile für Deckleisten und Beschläge), die außerhalb des Anwendungsbereichs dieses Teils von EN 15534 liegen.
EN 15534 1 legt die für diesen Teil von EN 15534 zutreffenden Prüfverfahren fest.
ANMERKUNG   Aus redaktionellen Gründen wird in EN 15534 die Abkürzung „WPC” für „Verbundwerkstoffe aus Cellulosehaltigen Materialien und Thermoplasten“ verwendet.

Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 4: Spécifications relatives aux lames et dalles pour platelage

La présente Norme européenne spécifie les caractéristiques des lames et des dalles pour platelage à base de matières cellulosiques et de thermoplastiques, communément appelées composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC), destinées à être utilisées à l'extérieur.
La présente partie de l’EN 15534 est applicable aux lames extrudées mais aussi aux dalles fabriquées par d'autres techniques de transformation des plastiques, par exemple le moulage par injection.
Elle n’est pas applicable aux kits (c'est-à-dire aux profilés pour barres d'appui, couvre-joints et quincaillerie) qui ne relèvent pas du domaine d'application de la présente partie de l'EN 15534.
L’EN 15534 1 spécifie les méthodes d'essai pertinentes pour la présente partie de l'EN 15534.
NOTE   Pour des raisons éditoriales, dans l'EN 15534, l'abréviation « WPC » est utilisée pour « matériaux composites à base de matières cellulosiques et de thermoplastiques ».

Kompoziti iz materialov na celulozni podlagi in plastomerov (navadno imenovani lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 4. del: Specifikacije za profile in ploščice talnih oblog

Standard EN 15534-4 določa lastnosti profilov in ploščic talnih oblog za zunanjo uporabo iz materialov na celulozni podlagi in plastomerov, navadno imenovanih lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC). Ta del standarda EN 15534 velja za ekstrudirane profile in tudi za ploščice, izdelane z drugimi postopki obdelave plastike, npr. vbrizgavanjem. Ne velja za komplete (npr. pomožni tirni profili, prekrivni profili in železnina), ki niso zajeti v tem delu standarda EN 15534. Standard EN 15534-1 določa preskusne metode, ki se nanašajo na ta del standarda EN 15534.

General Information

Status
Published
Publication Date
21-Jan-2014
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Sep-2019

Relations

Buy Standard

Standard
EN 15534-4:2014
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verbundwerkstoffe aus Cellulose haltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder natürliche Faserverbundwerkstoffe (NFC) genannt) - Teil 4: Anforderungen an Profile und Platten für BodenbelägeComposites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 4: Spécifications relatives aux lames et dalles pour platelageComposites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics products79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 15534-4:2014SIST EN 15534-4:2014en,fr,de01-maj-2014SIST EN 15534-4:2014SLOVENSKI
STANDARDSIST-TS CEN/TS 15534-3:20071DGRPHãþD



SIST EN 15534-4:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15534-4
January 2014 ICS 79.080; 83.140.99 Supersedes CEN/TS 15534-3:2007English Version
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 4: Spécifications relatives aux lames et dalles pour platelage
Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -Teil 4: Anforderungen an Profile und Formteile für Bodenbeläge This European Standard was approved by CEN on 9 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15534-4:2014 ESIST EN 15534-4:2014



EN 15534-4:2014 (E) 2 Contents Page Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Requirements .5 4.1 General .5 4.2 Material .6 4.3 Appearance .6 4.4 Physical characteristics .6 4.5 Mechanical characteristics .7 4.5.1 Falling ma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.