iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1503-3:2000/AC:2001

(Corrigendum)

Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards

Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards

TC - Mistake in Table 1

Armaturen - Werkstoffe für Gehäuse, Oberteile und Deckel - Teil 3: Gußeisen, das in Europäischen Normen festgelegt ist

Appareils de robinetterie - Matériaux pour les corps, chapeaux et couvercles - Partie 3: Fontes spécifiées dans les normes européennes

Ventili - Materiali za ohišja in pokrove - 3. del: Lita jekla, specificirana v evropskih standardih - Dodatek AC

General Information

Status
Withdrawn
Publication Date
06-Mar-2001
Withdrawal Date
25-Aug-2015
ICS
23.060.01 - Valves in general
77.080.10 - Irons
Technical Committee
CEN/TC 69 - Industrial valves
Drafting Committee
CEN/TC 69 - Industrial valves
Current Stage
9960 - Withdrawal effective - Withdrawal
Due Date
26-Aug-2015
Completion Date
26-Aug-2015
Ref Project
SIST EN 1503-3:2001/AC:2001 - Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards

Relations

Corrects
EN 1503-3:2000 - Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards
Effective Date
22-Dec-2008

Buy Standard

EN 1503-3:2001/AC:2001EN 1503-3:2001/AC:2001
PreviousNext
Corrigendum
EN 1503-3:2001/AC:2001
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ventili - Materiali za ohišja in pokrove - 3. del: Lita jekla, specificirana v evropskih standardih - Dodatek ACArmaturen - Werkstoffe für Gehäuse, Oberteile und Deckel - Teil 3: Gußeisen, das in Europäischen Normen festgelegt istAppareils de robinetterie - Matériaux pour les corps, chapeaux et couvercles - Partie 3: Fontes spécifiées dans les normes européennesValves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards77.140.80Železni in jekleni ulitkiIron and steel castings23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 1503-3:2000/AC:2001SIST EN 1503-3:2001/AC:2001en01-december-2001SIST EN 1503-3:2001/AC:2001SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1503-3:2000/ACMarch 2001Mars 2001März 2001English versionVersion FrançaiseDeutsche FassungValves - Materials for bodies, bonnets and covers - Part 3: Cast ironsspecified in European StandardsAppareils de robinetterie - Matériaux pourles corps, chapeaux et couvercles - Partie3: Fontes spécifiées dans les normeseuropéennesArmaturen - Werkstoffe für Gehäuse,Oberteile und Deckel - Teil 3: Gußeisen,das in Europäischen Normen festgelegt istThis corrigendum becomes effective on 7 March 2001 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 7
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 3773-001:2024(Main)
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
SIST EN 3773-001:2025

This document specifies the single-pole temperature compensated circuit breakers rated from 1 A to 25 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14750:2024(Main)
Railway applications - Air conditioning for urban, suburban and regional rolling stock: Comfort parameters and type tests
SIST EN 14750:2025

This document establishes thermal comfort parameters for areas accessible to passengers and staff on railway vehicles.
This document also specifies conditions, performance values and the comfort parameter validation methods.
This document is applicable to urban (metro, tramway), suburban and/or regional vehicles equipped with cooling and/or heating/ventilation systems. This document does not apply to main line vehicles and driver’s cabs which are considered in separate Standards.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1838:2024(Main)
Lighting applications - Emergency lighting for buildings
SIST EN 1838:2025

This document specifies the luminous requirements for emergency lighting systems, including adaptive emergency escape lighting systems, electric emergency lighting, installed in premises or locations where such systems are required or needed and which are principally applicable to locations where the public or workers have access.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17860-5:2024(Main)
Carrier cycles - Part 5: Electrical aspects
kSIST FprEN 17860-5:2024

This document applies to:
-   functional and electrical safety aspects of carrier cycles covered in all parts of EN 17860;
-   electrical aspects of electrically power assisted cycle trailers (EPACT) covered in prEN 17860-7;
-   electrical aspects of batteries used for carrier cycles;
-   electrical aspects of chargers used for carrier cycles.
This document does not apply to charging stations.
This document specifies requirements and test methods for motor power management systems, electrical circuits including the charger for the assessment of the design and assembly of carrier cycles and subassemblies for systems having a Safety Extra Low Voltage (SELV) maximum working voltage ≤ 60 V d.c. disregarding transients.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15663:2017+A2:2024(Main)
Railway applications - Vehicle reference masses
SIST EN 15663:2017+A2:2025

This European Standard defines a set of reference masses for specifying the requirements for the design, testing, acceptance, marking, delivery and operation of rail vehicles.
The reference masses defined in this document are as follows:
-   dead mass;
-   design mass in working order;
-   design mass under normal payload;
-   design mass under exceptional payload;
-   operational mass in working order;
-   operational mass under normal payload.
These reference masses are defined with respect to the whole vehicle, but they can also apply to a specific system or component.
The specification of values for tolerances applicable to reference masses is not in the scope of this standard. Tolerances can be required by an application standard.
Additional loadings due to environmental factors, for example snow and retained or absorbed rainwater, are not in the scope of this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1846-2:2024(Main)
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
SIST EN 1846-2:2025

This document specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846-1.
NOTE 1 Categories and mass classes of these vehicles are given in EN 1846-1.
NOTE 2 Vehicle means terrestrial vehicles that can also drive on rails and amphibious vehicles.
When drafting this document, it has been assumed that the finished standard automotive chassis (or
the chassis designed in accordance with the same principles) that is the basis for the firefighting or
rescue vehicle offers an acceptable safety level for its basic transport functions within the limits
specified by the manufacturer. Therefore, this document does not formulate requirements for this
chassis.
This document deals with all significant hazards, hazardous situations and events relevant to
firefighting and rescue service vehicles, when they are used as intended and under the conditions of
misuse which are reasonably foreseeable by the manufacturer.
Complementary specific requirements for aerial appliances are the subject of the following European
Standards:
— EN 1777: Hydraulic platforms (HPs) for firefighting and rescue services,
— EN 14043: Turntable ladders with combined movements,
— EN 14044: Turntable ladders with sequential movements.
NOTE 3 Additional regulations, not dealt with in this document, can apply in relation with the use of the
vehicles on public roads.
This document deals with firefighting and rescue vehicles intended for use in a temperature range
from –15 °C to +40 °C.
NOTE 4 In the case of utilization outside this temperature range, additional measures might be necessary as agreed between the manufacturer and the user. Such requirements are outside the scope of this document.
1.2   This document does not deal with the following types of firefighting or rescue vehicles or equipment:
-   vehicles designed exclusively for carrying personnel;
-   vehicles with a gross laden mass not exceeding 3 t;
-   boats;
-   aircraft;
-   railway vehicles;
-   ambulances (see EN 1789);
-   provisions for non-firefighting removable equipment driven by PTO;
-   airport vehicles in the scope of the recommendations of the International Civil Aviation Organization (ICAO).
1.3   This document deals with the technical requirements to minimize the hazards listed in Annex K which can arise during operational use, routine checking and maintenance of firefighting and rescue service vehicles when carried out in accordance with the specifications given by the manufacturer or his authorized representative.
It does not cover the hazards generated by:
-   non-permanently installed equipment i.e. portable equipment carried on the vehicle;
-   use in potentially explosive atmospheres;
-   commissioning and decommissioning;
-   electromagnetic compatibility.
Additional measures not dealt with in this document might be necessary for specific use (e.g. fire in natural environment, flooding, etc.).
1.4   This document is not applicable to machines that are manufactured before its date of publication as a European Standard.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14385:2024(Main)
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
kSIST FprEN 14385:2024

This document specifies a manual reference method for the determination of the mass concentration of specific elements in stationary source emissions. The method is applicable to each of the specific elements in the concentration range of 0,005 mg/m3 to 5 mg/m3.
This document has been validated for the determination of the mass concentration of metals in incineration exhaust gases - applying the performance criteria stated in Clause 9 - for the following elements:
-   arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), antimony (Sb), thallium (Tl), and vanadium (V) and their compounds.
The document can be used to determine metals other than those listed above (for example, selenium (Se) (ISO 17211), tellurium (Te), beryllium (Be), tin (Sn) and zinc (Zn)).
NOTE 1   These other metals mentioned above are commonly required by National Regulations, but this document currently has not yet been validated for these metals.
The document was validated for waste incinerators, but it is also applicable to other industrial processes, the practical experience shows that it can be applied over wide concentration ranges and various emission sources.
If mercury is intended to be determined as well, this can be sampled in a side stream arrangement of the sampling train (EN 13211) [5].
NOTE 2   This document has been validated with the described materials, equipment, sampling, and digestion performances etc., followed by analyses with atomic absorption spectroscopy (AAS) and inductively coupled plasma optical emission spectroscopy (ICP-OES,) or inductively coupled mass spectrometry (ICP-MS). This does not exclude the use of other types of equipment or analyses that meet the requirements and have been proven to be equivalent to the described European Standard.

  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 30-2-1:2024(Main)
Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General
kSIST FprEN 30-2-1:2024

This document specifies the requirements and the methods of test for the rational use of energy of gas burning domestic cooking appliances, in accordance with EN 30-1-1:2021+A1:2023, Clause 1.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1482-2:2024(Main)
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 2: General sample preparation provisions
SIST EN 1482-2:2025

This document specifies methods for the reduction and preparation of samples of fertilizers, liming materials, inhibitors and blends and sets out the requirements for sample preparation reports. It also specifies methods for the preparation of test samples and test portions from laboratory samples of fertilizer for subsequent chemical or physical analysis. It does not cover the preparation of samples for certain physical tests which require test portions of more than 2 kg.
NOTE 1   The term “fertilizer” is used throughout the body of this document and is understood to include liming materials and inhibitors unless otherwise indicated.
NOTE 2   In relation to the procedures set out in this part of the standard any special procedures specific to a particular test method will be set out in that method standard.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12697-16:2024(Main)
Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres
kSIST FprEN 12697-16:2024

This document specifies two test methods (method A and method B) for determining the susceptibility of abrasion by studded tyres, tested on cylindrical specimens of bituminous mixtures. The test methods are applicable to bituminous mixtures with aggregate with upper sieve size not exceeding 22 mm.
The tests are applicable to laboratory produced specimens or cores drilled from a slab or pavement.
NOTE 1   Method A originates from the “Prall”-method, which has been improved by comprehensive Nordic research work. The method correlates with abrasion in the field when using paving grade bitumen. According to Nordic experience, by method A the correlation between laboratory and abrasion in field is not established when polymer modified bitumen or rubber modified bitumen, etc. is used.
NOTE 2   Method B originates from Finnish experience and is suitable also when polymer modified bitumen is used. The correlation between laboratory and abrasion in field is not established when rubber is used.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day