Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks

This European Standard specifies the minimum performance and construction requirements for overfill prevention controllers located on the tank vehicle.
This European Standard applies to overfill prevention controllers for liquid fuels, having a flash point up to but not exceeding 100 °C.
The requirements apply to overfill prevention controllers suitable for use at ambient temperatures in the range from  25 °C to +60 °C, and subject to normal operational pressure variations.

Tanks für die Beförderung gefährlicher Güter - Transporttankausrüstung für Überfüllsicherungen für ortsfeste Tanks

Diese Europäische Norm legt die Mindestanforderungen an Leistung und Bauweise von an Tankfahrzeugen angebrachten Steuereinrichtungen für Überfüllsicherungen fest.
Diese Europäische Norm gilt für Steuereinrichtungen von Überfüllsicherungen für flüssige Brenn- und Kraftstoffe mit einem Flammpunkt bis einschließlich 100 °C.
Die Anforderungen gelten für Steuereinrichtungen von Überfüllsicherungen, die für die Verwendung innerhalb eines Umgebungstemperaturbereichs von −25 °C bis +60 °C und für die Einwirkung normaler Schwankungen des Betriebsdrucks geeignet sind.

Citernes destinées au transport de matières dangereuses - Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhicules-citernes

La présente Norme européenne spécifie les prescriptions minimales de performance et de construction applicables aux contrôleurs limiteurs de remplissage installés sur le véhicule-citerne.
La présente Norme européenne s'applique aux contrôleurs limiteurs de remplissage pour carburants pétroliers liquides ayant un point d'éclair inférieur ou égal à 100 °C.
Les prescriptions s'appliquent aux contrôleurs limiteurs de remplissage fonctionnant à des températures ambiantes comprises entre – 25 °C et + 60 °C et soumis à des variations de pression normales de fonctionnement.

Cisterne za prevoz nevarnega blaga - Oprema cistern za preprečitev prepolnitve nepremičnih rezervoarjev (vključno z dopolnilom A1)

Ta evropski standard določa minimalne zahteve glede zmogljivosti in konstrukcije za nadzorne naprave za preprečitev prepolnitve na cestni cisterni.
Ta evropski standard se uporablja za nadzorne naprave za preprečitev prepolnitve za tekoča goriva s plameniščem do največ 100 °C.
Zahteve veljajo za nadzorne naprave za preprečitev prepolnitve, ki so primerne za uporabo pri temperaturah okolja v razponu od 25 °C do +60 °C in so izpostavljene običajnim spremembam delovnega tlaka.

General Information

Status
Published
Publication Date
26-Jun-2018
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2021

Relations

Buy Standard

Standard
EN 16657:2016+A1:2018
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Transporttankausrüstung für Überfüllsicherungen für ortsfeste TanksCiternes destinées au transport de matières dangereuses - Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhicules-citernesTanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 16657:2016+A1:2018SIST EN 16657:2016+A1:2018en,fr,de01-november-2018SIST EN 16657:2016+A1:2018SLOVENSKI
STANDARDSIST EN 16657:20161DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16657:2016+A1
June
t r s z ICS
s uä u r râ
t uä r t rä s râ
t uä r t rä t râ
y wä t r r Supersedes EN
s x x w yã t r s xEnglish Version
Tanks for the transport of dangerous goods æ Transport tank equipment for overfill prevention devices for static tanks Citernes destinées au transport de matières dangereuses æ Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhiculesæciternes Tanks für die Beförderung gefährlicher Güter æ Transporttankausrüstung für Überfüllsicherungen für ortsfeste Tanks This European Standard was approved by CEN on
x June
t r s w and includes Amendment
s approved by CEN on
t z December
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x x w yã t r s x ªA sã t r s z ESIST EN 16657:2016+A1:2018

The controller shall be of a durable construction. The selection of materials and manufacturing processes shall consider environmental aspects. 5 Overfill prevention device 5.1 Equipment on the tank A sensor with mechanical interface shall be according to EN 13616-2. 5.2 Equipment on the tank vehicle The following equipment shall be on the tank-vehicle: — one or more controllers; The controller shall provide: — interface up to the maximum specified number of sensors; — permissive/non-permissive output states. — product supply system; — appropriate devices for stopping the product flow; — a connection between the controller and the sensor fitted with a socket according to Figure 1. 5.3 EMC requirements The controller shall comply with: — EN 61000-6-3 for emission; SIST EN 16657:2016+A1:2018
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.