EN ISO 7886-4:2009

Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006)

ISO 7886-4:2006 specifies requirements for sterile single-use hypodermic syringes made of plastic materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids immediately after filling and of design such that the syringe can be rendered unusable after use.
ISO 7886-4:2006 is not applicable to syringes made of glass (specified in ISO 595), auto-disable syringes for fixed dose immunization (ISO 7886-3) and syringes designed to be pre-filled. It does not address compatibility with injection fluids. Other standards can be applicable when syringes are used for any other intended purpose than those specified in ISO 7886-4:2006.
NOTE Syringes designed to reduce the risk of needlestick injuries can also comply with ISO 7886-4:2006 with regard to their re-use prevention properties, but it is stressed that anti-needlestick properties of syringes are not in themselves addressed in ISO 7886-4:2006.

Sterile Einmalspritzen für medizinische Zwecke - Teil 4: Spritzen mit Vorrichtung zur Verhinderung der Wiederverwendung (ISO 7886-4:2006)

Dieser Teil von ISO 7886 legt Anforderungen für sterile Einmalspritzen aus Kunststoff mit oder ohne Kanüle
fest, die für das Aufziehen von Flüssigkeiten oder für die Injektion von Flüssigkeiten unmittelbar nach ihrem
Befüllen vorgesehen und so gestaltet sind, dass die Spritze nach dem Gebrauch unbrauchbar gemacht
werden kann.
Dieser Teil von ISO 7886 ist nicht anwendbar auf Glasspritzen (festgelegt in ISO 595), selbstblockierende
Spritzen für die Injektion mit fixer Impfstoffdosis (festgelegt in ISO 7886-3) und zur Vorfüllung ausgelegte
Spritzen. Er behandelt nicht die Verträglichkeit mit Injektionsflüssigkeiten. Wenn Spritzen für andere Anwendungsbereiche
verwendet werden, können andere als die in diesem Teil von ISO 7886 festgelegten Normen
herangezogen werden.
ANMERKUNG Spritzen, die zur Reduzierung des Verletzungsrisikos durch die Einstichnadel ausgelegt sind, können
hinsichtlich ihrer Eigenschaften zur Verhinderung der Wiederverwendung auch mit diesem Teil von ISO 7886 übereinstimmen.
Es ist jedoch festzuhalten, dass andere Eigenschaften der Einstichnadel von Spritzen in diesem Teil von
ISO 7886 nicht behandelt werden.

Seringues hypodermiques stériles, non réutilisables - Partie 4: Seringues avec dispositif empêchant la réutilisation (ISO 7886-4:2006)

L'ISO 7886-4:2006 spécifie les exigences relatives aux seringues hypodermiques stériles en matière plastique, non réutilisables, avec ou sans aiguille, prévues pour aspirer des liquides ou pour en injecter immédiatement après remplissage, leur conception faisant que la seringue est rendue inutilisable après utilisation.
L'ISO 7886-4:2006 ne s'applique pas aux seringues en verre (spécifiées dans l'ISO 595), aux seringues autobloquantes pour vaccination à dose fixe (ISO 7886-3) et aux seringues conçues pour être préremplies. Elle n'aborde pas le problème de la compatibilité avec les liquides injectables. Si la seringue est utilisée à une autre fin prévue que celle spécifiée dans la présente partie de l'ISO 7886, d'autres normes sont applicables.
NOTE Les seringues conçues pour réduire les risques de blessures dues à des piqûres d'aiguille peuvent également être conformes à la présente partie de l'ISO 7886 en ce qui concerne leurs propriétés empêchant la réutilisation; il est toutefois à souligner que les propriétés de protection contre les piqûres d'aiguilles ne sont pas en tant que telles traitées dans la présente partie de l'ISO 7886.

Sterilne podkožne injekcijske brizge za enkratno uporabo - 4. del: Injekcije, katerih značilnosti preprečujejo ponovno uporabo (ISO 7886-4:2006)

Ta del ISO 7886 določa zahteve za sterilne podkožne injekcijskih brizg za enkratno uporabo z iglo ali brez nje, ki so narejene iz plastičnih materialov in se uporabljajo za aspiracijo tekočin ali injiciranje tekočin takoj po polnitvi ter so tako zasnovane, da injekcijska brizga po uporabi postane neuporabna. Ta del ISO 7886 ne velja za steklene injekcijske brizge (opredeljene v ISO 595), injekcijske brizge za točno določen odmerek imunizacije s sistemom za samouničenje (ISO 7886-3) in injekcijske brizge, ki se polnijo vnaprej. Ne obravnava skladnosti s tekočinami za injiciranje. Kadar se injekcijske brizge uporabljajo v katerikoli drug namen, ki ni naveden v temu delu ISO 7886, lahko veljajo drugi standardi.

General Information

• Status: Withdrawn
• Publication Date: 22-Sep-2009
• Withdrawal Date: 05-Mar-2019
• ICS: 11.040 - Medical equipment
• ICS: 11.040.20 - Transfusion, infusion and injection equipment
• ICS: 11.040.25 - Syringes, needles an catheters
• Technical Committee: CEN/TC 205 - Non-active medical devices
• Drafting Committee: CEN/TC 205 - Non-active medical devices
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Mar-2019
• Directive: 2007/47/EC - Directive 2007/47/EC of the European Parliament and of the council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/295 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 7886-4:2010 - Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006)

Relations

• Replaces: EN ISO 7886-4:2006 - Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006)
• Effective Date: 26-Sep-2009
• Replaced By: EN ISO 7886-4:2019 - Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2018)
• Effective Date: 09-Dec-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7886-4:2010
01-januar-2010
1DGRPHãþD
SIST EN ISO 7886-4:2007
6WHULOQHSRGNRåQHLQMHNFLMVNHEUL]JH]DHQNUDWQRXSRUDERGHO,QMHNFLMHNDWHULK
]QDþLOQRVWLSUHSUHþXMHMRSRQRYQRXSRUDER,62
Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention
feature (ISO 7886-4:2006)
Sterile Einmalspritzen für medizinische Zwecke - Teil 4: Spritzen mit Vorrichtung zur
Verhinderung der Wiederverwendung (ISO 7886-4:2006)
Seringues hypodermiques stériles, non réutilisables - Partie 4: Seringues avec dispositif
empêchant la réutilisation (ISO 7886-4:2006)
Ta slovenski standard je istoveten z: EN ISO 7886-4:2009
ICS:
11.040.25 Injekcijske brizge, igle in Syringes, needles an
katetri catheters
SIST EN ISO 7886-4:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7886-4:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 7886-4:2010


EUROPEAN STANDARD
EN ISO 7886-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2009
ICS 11.040.25 Supersedes EN ISO 7886-4:2006
English Version
Sterile hypodermic syringes for single use - Part 4: Syringes with
re-use prevention feature (ISO 7886-4:2006)
Seringues hypodermiques stériles, non réutilisables - Partie Sterile Einmalspritzen für medizinische Zwecke - Teil 4:
4: Seringues avec dispositif empêchant la réutilisation (ISO Spritzen mit Vorrichtung zur Verhinderung der
7886-4:2006) Wiederverwendung (ISO 7886-4:2006)
This European Standard was approved by CEN on 24 August 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7886-4:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7886-4:2010
EN ISO 7886-4:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 93/42/EEC on medical devices .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7886-4:2010
EN ISO 7886-4:2009 (E)
Foreword
The text of ISO 7886-4:2006 has been prepared by Technical Committee ISO/TC 84 “Devices for
administration of medicinal products and intravascular catheters” of the International Organization for
Standardization (ISO) and has been taken over as EN ISO 7886-4:2009.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7886-4:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
...