EN 287-2:1992

Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of aluminium. The recommended format for the certificate of approval testing is given in Annex A.  During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex C.  This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations.  This standard applies to the approval testing of welders for the fusion welding of aluminium using gas in shield.  The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. This standard does not cover fully mechanized and fully automatic processes (.).1)  This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4.  The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.1)  1. Modified by Amendment A1 :1997

Prüfung von Schweißern - Schmelzschweißen - Teil 2: Aluminium und Aluminiumlegierungen

In dieser Norm werden die wesentlichen Anforderungen, Geltungsbereiche, Prüf- und Bewertungsbedingungen sowie die Prüfungsbescheinigung über die durchgeführte Prüfung des Schweissers für Aluminiumschweissungen festgelegt. Im Anhang A ist der empfohlene Vordruck für die Prüfungsbescheinigung des Schweissers wiedergegeben

Qualification des soudeurs - Soudage par fusion - Partie 2: Aluminium et ses alliages

La présente norme spécifie les prescriptions essentielles à respecter, les domaines de validité, les conditions de contrôle, d'examens et d'essai, les critères d'acceptation et de notification des résultats de l'épreuve de qualification de soudeurs sur aluminium. La présentation recommandée du certificat de qualification fait l'objet de l'annexe A.

Preskušanje za odobritev varilcev - Talilno varjenje - 2. del: Aluminij in aluminijeve zlitine

General Information

• Status: Withdrawn
• Publication Date: 25-Feb-1992
• Withdrawal Date: 14-Dec-2004
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 2 - Approval requirements for welding and allied processes personnel
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2004
• Completion Date: 15-Dec-2004
• Directive: 87/404/EEC - Simple pressure vessels
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
• Ref Project: SIST EN 287-2:1996 - Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys

Relations

• Amended By: EN 287-2:1992/A1:1997 - Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 9606-2:2004 - Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
• Effective Date: 22-Dec-2008