EN 12927-6:2004
(Main)Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria
Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria
This part of EN 12927 specifies the safety requirements applicable to discard criteria for steel ropes for passenger transportation by rope. This standard is applicable to the various types of installations and takes into account their environment.
This part of EN 12927 applies to all types of ropes and end fixing used in cableways for passenger transport.
Some requirements concern synthetic ropes.
Requirements relating to the protection of workers are not included in this part of EN 12927.
This part of EN 12927 is not applicable to installations for the transportation of goods nor to inclined lifts.
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 6: Ablegekriterien
Diese Europäische Norm legt die Sicherheitsanforderungen an die Ablegekriterien von Seilen, der Seilbahnen des Personenverkehrs fest. Dabei werden die verschiedenen Seilbahnen- und Schleppaufzügssysteme une deren Umgebung berücksichtigt. Diese Norm gilt für alle Seilarten, die bei Seilbahnen des Personenverkehrs eingesetzt werden. Unter Berücksichtigung ihres Anwendungsbereiches beinhaltet diese Europäische Norm keine Anforderungen an den Arbeitnehmerschutz. Sie gilt für alle Seile, die nach der Veröffentlichung der Norm montiert werden.
Prescriptions de sécurité pour les installations à câbles transportant des personnes - Câbles - Partie 6 : Critères de dépose
La présente partie de l'EN 12927 spécifie les prescriptions de sécurité applicables aux critères de dépose des installations à câbles transportant des personnes . Elle s'applique aux différents types d'installations et tient compte de leur environnement.
La présente partie de l'EN 12927 s'applique à tous les types de câbles et d'attaches d'extrémité utilisés dans les installations de transport à câbles destinées aux personnes.
Certaines prescriptions concernent les câbles en fibre synthétique.
Les prescriptions relatives à la protection des travailleurs ne sont pas prévues dans cette partie de l'EN 12927.
La présente partie de l'EN 12927 ne s'applique ni aux installations de transport de marchandises, ni aux ascenseurs inclinés.
Varnostne zahteve za žičniške naprave za prevoz oseb – Vrvi – 6. del: Izločitveni kriteriji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteriaNULWHULMLPrescriptions de sécurité pour les installations a câbles transportant des personnes - Câbles - Partie 6 : Criteres de déposeSicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 6: AblegekriterienTa slovenski standard je istoveten z:EN 12927-6:2004SIST EN 12927-6:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 12927-6:200501-januar-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12927-6October 2004ICS 45.100English versionSafety requirements for cableway installations designed to carrypersons - Ropes - Part 6: Discard criteriaPrescriptions de sécurité pour les installations à câblestransportant des personnes - Câbles - Partie 6 : Critères dedéposeSicherheitsanforderungen für Seilbahnen undSchleppaufzüge im Personenverkehr - Seile - Teil 6:AblegekriterienThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12927-6:2004: E
A–deviations.11 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons.12 Table ZA — Correspondence between this European Standard and Directive 2000/9/EC relating to cableway installations designed to carry persons.12
– Ropes": Part 1: Selection criteria for ropes and their end fixings Part 2: Safety factors Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes Part 4: End fixings Part 5: Storage, transportation, installation and tensioning Part 6: Discard criteria Part 7: Inspection, repair and maintenance Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by rope. This programme includes the following standards: 1) Safety requirements for cableway installations designed to carry persons
- Terminology 2) Safety requirements for cableway installations designed to carry persons
- General requirements 3) Safety requirements for cableway installations designed to carry persons
- Calculations 4) Safety requirements for cableway installations designed to carry persons
- Ropes 5) Safety requirements for cableway installations designed to carry persons
- Tensioning devices 6) Safety requirements for cableway installations designed to carry persons
- Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons
- Carriers 8) Safety requirements for cableway installations designed to carry persons
- Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons
- Civil engineering works
– Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons
– Recovery and evacuation 12) Safety requirements for cableway installations designed to carry persons
- Operation 13) Safety requirements for cableway installations designed to carry persons
- Quality assurance Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all installations for passenger transportation by rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 1709, Safety requirements for cableway installations designed to carry persons
- Pre-commissioning inspection, maintenance, operational inspection and checks. prEN 1907:2004, Safety requirements for cableway installations designed to carry persons - Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons
- Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons
- Recovery and evacuation. EN 12397, Safety requirements for cableway installations designed to carry persons
– Operation. EN 12408, Safety requirements for cableway installations designed to carry persons
- Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry persons
– Ropes – Part 1: Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installations designed to carry persons
– Ropes – Part 2 : Safety factors. EN 12927-3, Safety requirements for cableway installations designed to carry persons
– Ropes – Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes. EN 12927-4, Safety requirements for cableway installations designed to carry persons
– Ropes – Part 4: End fixings. EN 12927-5, Safety requirements for cableway installations designed to carry persons
– Ropes – Part 5: Storage, transportation, installation and tensioning. EN 12927-7 Safety requirements for cableway installations designed to carry persons
– Ropes – Part 7: Inspection, repair and maintenance. EN 12927-8, Safety requirements for cableway installations designed to carry persons
– Ropes – Part 8: Magnetic rope testing (MRT). EN 12929-1, Safety requirements for passenger transportation by rope - General requirements - Part 1: Requirements applicable to all installations.
– General requirements – Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes. EN 12930, Safety requirements for cableway installations designed to carry persons
– Calculations. EN 13107, Safety requirements for cableway installations designed to carry persons
– Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry persons
– Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway installations designed to carry persons
- Electrical equipment other than for drive systems. prEN 13796-1, Safety requirements for cableway installations designed to carry persons
– Carriers – Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers. prEN 13796-2, Safety requirements for cableway installations designed to carry persons
– Carriers – Part 2: Slipping resistance tests for grips. prEN 13796-3, Safety requirements for cableway installations designed to carry persons
- Carriers – Part 3: Fatigue testing. 3 Terms and definitions For the purposes of this document, the terms and definitions given in prEN 1907:2004 and the following apply. 3.1 discard criteria level of deterioration at which the rope or the end fixing is declared unfit for further service NOTE In certain cases a rope can be repaired (see EN 12927-3 and EN 12927-7). 3.2 reference length the length of rope over which the value of a specified characteristic is measured or assessed e.g. 6 x d (6 x nominal diameter of the rope) 3.3 loss in metallic area (lma) reduction in area expressed as a percentage of the nominal metallic cross-sectional area of the new rope, taking into account the effects of broken wires and the effect of corrosion and wear 3.4 main body of the rope all the length of rope excluding any sections in end fixing or long splice 3.5
additional tensioning device additional device intended to hold the tension in a rope in case of failure of the main tensioning device 4 Symbols d nominal diameter of the rope.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.