Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228.
NOTE 1   This document gives all relevant characteristics, requirements and test methods for (bio)ethanol, which are known at this time to be necessary to define the product to be used up to a maximum 10 % (V/V) blending component for automotive petrol fuel. The requirements need to be restudied if the percentage or use is expanded beyond 10 % volume.
NOTE 2   For the purposes of this document, the term % (m/m) and % (V/V) are used to represent the mass fraction, µ, and the volume fraction respectively.

Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen und Prüfverfahren für angeliefertes bzw. vermarktetes Ethanol fest, das als Streckmittel für Kraftstoffe zum Einsatz in Kraftfahrzeugen mit Ottomotor, in Übereinstimmung mit den Anforderungen von EN 228, Verwendung findet. ANMERKUNG 1 Dieses Dokument gibt alle relevanten Kenndaten, Anforderungen und Prüfverfahren für (Bio)Ethanol vor, die zum gegenwärtigen Zeitpunkt für die Festlegung der Produkteigenschaften für den Einsatz als Blendkomponente bis zu einem Volumenanteil von bis zu 10 % (V/V) in Ottokraftstoff als notwendig bekannt sind. Diese Anforderungen bedürfen einer erneuten Untersuchung, sofern der Anteil bzw. die Verwendung einen Volumenanteil von 10 % (V/V) übersteigt. ANMERKUNG 2 Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils einer Substanz, μ, der Ausdruck „% (m/m)“ und für den Volumenanteil einer Substanz, φ, der Ausdruck „% (V/V)“ verwendet.

Carburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essais

Le présent document prescrit des exigences et des méthodes d’essais pour l’éthanol mis sur le marché et livré pour être utilisé comme composant du carburant automobile pour véhicules à moteur à essence conformément aux exigences de l'EN 228.
NOTE 1   Le présent document donne l’ensemble des caractéristiques, des exigences et méthodes d'essai applicables à l’(au) (bio)éthanol qui sont actuellement reconnues comme nécessaires pour définir le produit destiné à être utilisé en mélange avec l’essence automobiles à hauteur de 10 % (V/V) maximum. Pour une teneur plus élevée ou un usage au-delà de 10 % en volume, les exigences doivent être réétudiées.
NOTE 2   Dans le cadre de ce document, les expressions "% (m/m)" et "% (V/V)" sont utilisées pour désigner respectivement les fractions massiques,µ, et les fractions volumiques, φ.

Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metode

Ta evropski standard določa zahteve za preskusne metode za etanol, ki je na trgu ali se dobavlja in ki se uporablja kot polnilo pri gorivih za motorna vozila, v skladu z zahtevami iz EN 228.

General Information

Status
Withdrawn
Publication Date
01-Feb-2011
Withdrawal Date
14-Oct-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Oct-2014

Relations

Buy Standard

Standard
EN 15376:2011
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metodeKraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und PrüfverfahrenCarburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essaisAutomotive fuels - Ethanol as a blending component for petrol - Requirements and test methods75.160.20Liquid fuels71.080.60Alkoholi. EtriAlcohols. EthersICS:Ta slovenski standard je istoveten z:EN 15376:2011SIST EN 15376:2011en,de01-april-2011SIST EN 15376:2011SLOVENSKI
STANDARDSIST EN 15376:2008+A1:20091DGRPHãþD



SIST EN 15376:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15376
February 2011 ICS 71.080.60; 75.160.20 Supersedes EN 15376:2007+A1:2009English Version
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Carburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essais
Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 24 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15376:2011: ESIST EN 15376:2011



EN 15376:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Sampling .54 Requirements and test methods .54.1 Dyes and markers .54.2 Additives .54.3 Denaturing .54.4 Generally applicable requirements and related test methods .64.5 Climate dependent requirements and related test methods .74.6 Precision and dispute .7Bibliography .8 SIST EN 15376:2011



EN 15376:2011 (E) 3 Foreword This document (EN 15376:2011) has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at the l
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.