EN ISO 14155-2:2009

Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plans (ISO 14155-2:2003)

1 Scope
This part of EN ISO 14155 provides requirements for the preparation of a Clinical Investigation Plan (CIP) for the clinical investigation of medical devices. The compilation of a CIP in accordance with the requirements of this standard and adherence to it will help in optimising the scientific validity and reproducibility of the results of a clinical investigation.
This Standard does not apply to in vitro diagnostic medical devices.

Klinische Prüfung von Medizinprodukten an Menschen - Teil 2: Klinische Prüfpläne (ISO 14155-2:2003)

Dieser Teil von EN ISO 14155 legt Anforderungen für die Erarbeitung von Prüfplänen (CIP) für die klinische Prüfung von Medizinprodukten fest. Die Erarbeitung eines CIP in Übereinstimmung mit den Anforderungen dieser Norm und dessen Befolgung wird die wissenschaftliche Gültigkeit einer klinischen Prüfung und die Reproduzierbarkeit ihrer Ergebnisse verbessern helfen.
Diese Norm gilt nicht für Medizinprodukte für die In-vitro-Diagnostik.

Investigation clinique des dispositifs médicaux pour sujets humains - Partie 2: Plans d'investigation clinique (ISO 14155-2:2003)

Klinične raziskave medicinskih pripomočkov za ljudi - 2. del: Načrti kliničnih raziskav (ISO 14155-2:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Jul-2009
• Withdrawal Date: 31-Jan-2011
• ICS: 11.040.01 - Medical equipment in general
• ICS: 11.100.20 - Biological evaluation of medical devices
• Technical Committee: CEN/TC 258 - Clinical investigation of medical devices
• Drafting Committee: CEN/TC 258/WG 2 - Clinical investigation plans
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Feb-2011
• Completion Date: 01-Feb-2011
• Directive: 2007/47/EC - Directive 2007/47/EC of the European Parliament and of the council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market
• Directive: 90/385/EEC - Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/295 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 14155-2:2009 - Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plans (ISO 14155-2:2003)

Relations

• Replaces: EN ISO 14155-2:2003 - Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plans (ISO 14155-2:2003)
• Effective Date: 18-Jul-2009

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2009
1DGRPHãþD
SIST EN ISO 14155-2:2003
.OLQLþQHUD]LVNDYHPHGLFLQVNLKSULSRPRþNRY]DOMXGLGHO1DþUWLNOLQLþQLK
UD]LVNDY,62
Clinical investigation of medical devices for human subjects - Part 2: Clinical
investigation plans (ISO 14155-2:2003)
Klinische Prüfung von Medizinprodukten an Menschen - Teil 2: Klinische Prüfpläne (ISO
14155-2:2003)
Investigation clinique des dispositifs médicaux sur les sujets humains - Partie 2: Plan
d'investigation clinique (ISO 14155-2:2003)
Ta slovenski standard je istoveten z: EN ISO 14155-2:2009
ICS:
11.040.01 Medicinska oprema na Medical equipment in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14155-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 11.100.20 Supersedes EN ISO 14155-2:2003
English Version
Clinical investigation of medical devices for human subjects -
Part 2: Clinical investigation plans (ISO 14155-2:2003)
Investigation clinique des dispositifs médicaux pour sujets Klinische Prüfung von Medizinprodukten an Menschen -
humains - Partie 2: Plans d'investigation clinique (ISO Teil 2: Klinische Prüfpläne (ISO 14155-2:2003)
14155-2:2003)
This European Standard was approved by CEN on 27 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14155-2:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC on Medical Devices .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 90/385/EEC on Active Implantable Medical Devices .5

Foreword
The text of ISO 14155-2:2003 has been prepared by Technical Committee ISO/TC 194 “Biological evaluation
of medical devices” of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 14155-2:2009 by Technical Committee CEN/TC 258 “Clinical investigation of medical devices” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14155-2:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA and ZB, which are an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14155-2:2003 has been approved by CEN as a EN ISO 14155-2:2009 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential Requirements of
EU Directive 93/42/EEC on Medical Devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 93/42/EEC on medical devices.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in table ZA confers, within the limits of the scope of this standard, a presumption of conformity
with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA — Correspondence between this European Standard and Directive 93/42/EEC on medical
devices
Clause(s)/sub-clause(s) of this Essential Requirements (ERs) Qualifying remarks/Notes
EN of Directive 93/42/EEC
4.5.1 Annex X: This requirement is also addressed
1.1.1 in A.2.5 of EN 14155-1:2003
4.5.3 Annex X: This requirement is also addressed
1.1.2 in 11 of EN 14155-1:2003
4.5.4 Annex X:
2.3.4
Annex X: This requirement is not addressed in
1.1.a) this standard
Annex X: This requirement is partly addressed
1.1 b) in Clause 7 of EN 14155-1:2003
Annex X: This requirement is not addressed in
1.1 c) this standard
Annex X: This requirement is not addressed in
1.1 d) this standard
Annex X: This requirement is addressed in
2.2 Clause 5 of EN 14155-1:2003
Entire document Annex X: This requirement is also addressed
2.3.1 in 6.3 of EN 14155-1:2003
4.7 Annex X: This requirement is also addressed
2.3.2 in 6.3 of EN 14155-1:2003
4.7 Annex X: This requirement is also addressed
2.3.3 in 6.3 of EN 14155-1:2003
4.11 Annex X: This requirement is also addressed
2.3.5 in 8.2 i) of EN 14155-1:2003
Annex X: This requirement is addressed in
2.3.6 10.2 a) of EN 14155-1:2003
Annex X: This requirement is addressed in
2.3.7 11.2 of EN 14155-1:2003
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
Annex ZB
(informative)
Relationship between this European Standard and the Essential Requirements of
EU Directive 90/385/EEC on Active Implantable Medical Devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 90/385/EEC on active implantable medical devices.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in table ZB confers, within the limits of the scope of this standard, a presumption of conformity
with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZB — Correspondence between this European Standard and Directive 90/385/EEC on active
implantable medical devices
Clause(s)/sub-clause(s) of this Essential Requirements (ERs) of Qualifying remarks/Notes
EN Directive 90/385/EEC
4.5.1 Annex 7: This requirement is also addressed
1.1.1 in A.2.5 of EN 14155-1:2003
4.5.3 Annex 7: This requirement is also addressed
1.1.2 in Clause 11 of EN 14155-1:2003
4.5.4 Annex 7:
2.3.4
Annex 7: This requirement is addressed in
1.2 A.2.5 of EN 14155-1:2003
Annex 7: This requirement is addressed in
1.3 Clause 7 of EN 14155-1:2003
Annex 7: This requirement is not addressed in
1.4 this standard
Annex 7: This requirement is not addressed in
1.5 this standard
Annex 7: This requirement is addressed in 6.5
1.6 of EN 14155-1:2003
Entire document Annex 7: This requirement is also addressed
2.3.1 in 6.3 of EN 14155-1:2003
4.7 Annex 7: This requirement is also addressed
2.3.2 in 6.3 of EN 14155-1:2003
4.7 Annex 7: This requirement is also addressed
2.3.3 in 6.3 of EN 14155-1:2003
4.11 Annex 7: This requirement is also addressed
2.3.5 in 8.2 i) of EN 14155-1:2003
Annex 7: This requirement is addressed in
2.3.6 10.2 a) of EN 14155-1:2003
Annex 7: This requirement is addressed in
2.3.7 11.2 of EN 14155-1:2003
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 14155-2
First edition
2003-05-15
Clinical investigation of medical devices
for human subjects —
Part 2:
Clinical investigation plans
Investigation clinique des dispositifs médicaux pour sujets humains —
Partie 2: Plans d'investigation clinique

Reference number
ISO 14155-2:2003(E)
©
ISO 2003
ISO 14155-2:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved

ISO 14155-2:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14155-2 was prepared by the European Committee for Standardization (CEN) in collaboration with
Technical Committee ISO/TC 194, Biological evaluation of medical devices, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Throughout the text of this document, read ".this European Standard." to mean ".this International
Standard.".
This first edition, together with the first edition of ISO 14155-1, cancels and replaces ISO 14155:1996, which
has been technically revised.
ISO 14155 consists of the following parts, under the general title Clinical investigation of medical devices for
human subjects:
— Part 1: General requirements
— Part 2: Clinical investigation plans
For the purposes of this part of ISO 14155, the CEN annex regarding fulfilment of European Council
Directives has been removed.
ISO 14155-2:2003(E)
Contents
Page
Foreword.v
Introduction .
...