iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 11260:2018

(Main)

Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018)

Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018)

This document specifies a method for the determination of the cation exchange capacity (CEC) at the pH of the soil and for the determination of the content of exchangeable sodium, potassium, calcium and magnesium in soil.
This document is applicable to all types of air-dried soil samples. ISO 11464 can be used for pre-treatment.

Bodenbeschaffenheit - Bestimmung der effektiven Kationenaustauschkapazität und der Basensättigung unter Verwendung von Bariumchloridlösung (ISO 11260:2018)

Dieses Dokument legt ein Verfahren zur Bestimmung der Kationenaustauschkapazität (KAK) beim pH Wert des Bodens und zur Bestimmung des Gehalts an austauschbarem Natrium, Kalium, Calcium und Magnesium im Boden fest.
Dieses Dokument gilt für alle Arten von lufttrockenen Bodenproben. Die Probenvorbehandlung nach ISO 11464 wird empfohlen.

Qualité du sol - Détermination de la capacité d'échange cationique effective et du taux de saturation en bases échangeables à l'aide d'une solution de chlorure de baryum (ISO 11260:2018)

Le présent document spécifie une méthode pour la détermination de la capacité d'échange cationique (CEC) au pH du sol et de la teneur en sodium, potassium, calcium et magnésium échangeables dans le sol.
Le présent document est applicable à tous les types d'échantillons de sol séchés à l'air. L'ISO 11464 peut être utilisée pour un prétraitement.

Kakovost tal - Določevanje efektivne kationske izmenjalne kapacitete in stopnje nasičenosti z bazičnimi kationi z raztopino barijevega klorida (ISO 11260:2018)

Ta dokument določa metodo za določevanje kationske izmenjalne kapacitete (CEC) pri določenem pH tal in za ugotavljanje vsebnosti izmenljivega natrija, kalija, kalcija in
magnezija v tleh.
Ta dokument se uporablja za vse vrste vzorcev tal, sušenih na zraku. Standard ISO 11464 se lahko uporablja za predhodno obdelavo.

General Information

Status
Published
Publication Date
15-May-2018
ICS
13.080.10 - Chemical characteristics of soils
Technical Committee
CEN/TC 444 - Environmental characterization
Drafting Committee
CEN/TC 444/WG 5 - Physical tests
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-May-2018
Completion Date
16-May-2018
Ref Project
SIST EN ISO 11260:2018 - Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018)

Relations

Replaces
EN ISO 11260:2011 - Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:1994+Cor 1:1996)
Effective Date
04-Feb-2015

Buy Standard

EN ISO 11260:2018EN ISO 11260:2018
PreviousNext
Standard
EN ISO 11260:2018
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11260:2018
01-julij-2018
1DGRPHãþD
SIST EN ISO 11260:2011
.DNRYRVWWDO'RORþHYDQMHHIHNWLYQHNDWLRQVNHL]PHQMDOQHNDSDFLWHWHLQVWRSQMH
QDVLþHQRVWL]ED]LþQLPLNDWLRQL]UD]WRSLQREDULMHYHJDNORULGD ,62
Soil quality - Determination of effective cation exchange capacity and base saturation
level using barium chloride solution (ISO 11260:2018)
Bodenbeschaffenheit - Bestimmung der effektiven Kationenaustauschkapazität und der
Basensättigung unter Verwendung von Bariumchloridlösung (ISO 11260:2018)
Qualité du sol - Détermination de la capacité d'échange cationique effective et du taux
de saturation en bases échangeables à l'aide d'une solution de chlorure de baryum (ISO
11260:2018)
Ta slovenski standard je istoveten z: EN ISO 11260:2018
ICS:
13.080.10 .HPLMVNH]QDþLOQRVWLWDO Chemical characteristics of
soils
SIST EN ISO 11260:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11260:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 11260:2018


EN ISO 11260
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2018
EUROPÄISCHE NORM
ICS 13.080.10 Supersedes EN ISO 11260:2011
English Version

Soil quality - Determination of effective cation exchange
capacity and base saturation level using barium chloride
solution (ISO 11260:2018)
Qualité du sol - Détermination de la capacité d'échange Bodenbeschaffenheit - Bestimmung der effektiven
cationique effective et du taux de saturation en bases Kationenaustauschkapazität und der Basensättigung
échangeables à l'aide d'une solution de chlorure de unter Verwendung von Bariumchloridlösung (ISO
baryum (ISO 11260:2018) 11260:2018)
This European Standard was approved by CEN on 19 March 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11260:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11260:2018
EN ISO 11260:2018 (E)
Contents Page
European foreword . 3
Endorsement notice . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11260:2018
EN ISO 11260:2018 (E)
European foreword
This document (EN ISO 11260:2018) has been prepared by Technical Committee ISO/TC 109 " Oil and
gas burners" in collaboration with Technical Committee CEN/TC 444 “Test methods for environmental
characterization of solid matrices” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2018, and conflicting national standards
shall be withdrawn at the latest by November 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11260:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 22036:2024(Main)
Environmental solid matrices - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 22036:2024)
SIST EN ISO 22036:2024

This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gallium (Ga), gadolinium (Gd), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu) magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tantalum (Ta), tellurium (Te), terbium (Tb), thallium (Tl), thulium (Tm), thorium (Th), tin (Sn), titanium (Ti), tungsten (W), vanadium (V), yttrium (Y), ytterbium (Yb), zinc (Zn) and zirconium (Zr).
The method is also applicable to other extracts or digests originating from, for example, DTPA extraction, fusion methods or total digestion methods, provided the user has verified the applicability.
The method has been validated for the elements given in Table A.1 (sludge), Table A.2 (compost) and Table A.3 (soil). The method is applicable for other solid matrices and other elements as listed above, provided the user has verified the applicability.
This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[22]).
NOTE            Construction products include e.g. mineral-based products; bituminous products; metals; wood-based products; plastics and rubbers; sealants and adhesives; paints and coatings.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17505:2023(Main)
Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
SIST EN 17505:2024

This European standard specifies a method for the differentiated determination of the organic carbon content (TOC400) which is released at temperatures up to 400 °C, the residual oxidizable carbon (ROC) (including e.g. lignite (brown coal), hard coal, charcoal, black carbon, soot) and the inorganic carbon (TIC900) which is released at temperatures up to 900 °C.
The basis is the dry combustion to CO2 in a in the presence of oxygen using using temperatures ranging from 150°C to 900 °C in dry solid samples of soil, soil with anthropogenic admixtures and solid waste (see Table 1) with carbon contents of more than 1 g per kg (0,1 % C) (per carbon type in the test portion).

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10390:2022(Main)
Soil, treated biowaste and sludge - Determination of pH (ISO 10390:2021)
SIST EN ISO 10390:2022

This document specifies an instrumental method for the routine determination of pH within the range pH 2 to pH 12 using a glass electrode in a 1:5 (volume fraction) suspension of soil, sludge and treated biowaste in either water (pH in H2O), in 1 mol/l potassium chloride solution (pH in KCl) or in 0,01 mol/l calcium chloride solution (pH in CaCl2).
This document is applicable to all types of air-dried soil and treated biowaste samples.
NOTE       For example, pretreated in accordance with ISO 11464 or EN 16179 or EN 15002.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15936:2022(Main)
Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustion
SIST EN 15936:2022

This document specifies two methods for the determination of total organic carbon (TOC) in sludge, treated biowaste, soil and waste samples containing more than 0,1 % carbon in relation to the dry mass (dm).
NOTE   This method can also be applied to other environmental solid matrices, provided the user has verified the applicability.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17503:2022(Main)
Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
SIST EN 17503:2023

This document specifies different methods for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAH) (see Table 2) in soil, sludge, treated biowaste, and waste, using GC-MS or HPLC-UV-DAD/FLD covering a wide range of PAH contamination levels (see Table 2).
NOTE   The method can be applied to sediments provided that validity is demonstrated by the user.
When using fluorescence detection, acenaphthylene cannot be measured.
[Table 2 -Target analytes of this document]
The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract.
Under the conditions specified in this document, the lower limit of application from 10 μg/kg (expressed as dry matter) for soils, sludge and biowaste to 100 μg/kg (expressed as dry matter) for solid waste can be achieved. For some specific samples (e.g. bitumen) the limit of 100 μg/kg cannot be reached.
Sludge, waste and treated biowaste can differ in properties as well as in the expected contamination levels of PAH and presence of interfering substances. These differences make it impossible to describe one general procedure. This document contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used.
The method can be applied to the analysis of other PAH not specified in the scope, provided suitability is proven by proper in-house validation experiments.
Sampling is not part of this standard. In dependence of the materials, the following standards need to be considered, e.g. EN 14899, ISO 5667-12 and EN ISO 5667-13.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16166:2021(Main)
Soil, treated biowaste and sludge - Determination of adsorbed organically bound halogens (AOX)
SIST EN 16166:2022

This document specifies an operationally defined method for the direct determination of organically bound halogens (chlorine, bromine and iodine) adsorbed and occluded to the sample matrix. AOX being a methodologically defined parameter, it is essential that the procedure is applied without any modification.
This document is intended for analysis of sludge, treated biowaste or soil in concentrations ranging from 5 mg/kg dry matter. The upper limit and exact concentration range covered depend on the instrumentation used for determination.
NOTE This method can also be applied to other environmental solid matrices, provided the user has verified the applicability.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11916-3:2021(Main)
Soil quality - Determination of selected explosives and related compounds - Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS) (ISO 11916-3:2021)
SIST EN ISO 11916-3:2022

This document specifies the measurement of explosives and related nitrocompounds (as given in Table 1) in soil and soil materials. This document is intended for the trace analysis of explosives and related compounds by liquid chromatography–tandem mass spectrometry (LC-MS/MS). Generally, LC-MS/MS measurement shows the lower LOQ (limit of quantification) for each compound in Table 1 than using high-performance liquid chromatography (HPLC) with UV-detection (see Annex B and Annex C).
Under the conditions specified in this document, concentrations as low as 0,005 mg/kg to 0,014 mg/kg-dry matter can be determined, depending on the substance. Similar compounds, in particular various nitroaromatics, by-products and degradation products of explosive compounds can be analysed using this method provided that the applicability is checked on a case-by-case basis.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15192:2021(Main)
Soil and waste - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection (ISO 15192:2021)
SIST EN ISO 15192:2021

This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg.
NOTE       In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12404:2021(Main)
Soil and waste - Guidance on the selection and application of screening methods (ISO 12404:2021)
SIST EN ISO 12404:2021

This document provides guidance on the selection and application of screening methods for assessing soil quality and waste characterization, including distribution of target parameters in soil and soil‑like material. The aim of this document is to set up criteria as to when the different kind of screening methods can be applied for the analysis of a certain parameter in soil, including soil‑like material, and waste, and which steps are required to prove their suitability.
This document does not recommend any particular screening method but confirms the principles of their selection and application.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 54321:2021(Main)
Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)
SIST EN ISO 54321:2021

This document specifies two methods for digestion of soil, treated biowaste, sludge and waste by the use of an aqua regia digestion.
Digestion with aqua regia will not necessarily accomplish total decomposition of the sample. The extracted analyte concentrations may not necessarily reflect the total content in the sample but represent the aqua regia soluble metals under the condition of this test procedure. It is generally agreed that for environmental analysis purposes, the results are fit for the intended purpose to protect the environment.
This document is applicable for the following elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), boron (B), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), phosphorus (P), potassium (K), selenium (Se), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), thallium (Tl), tin (Sn), titanium (Ti), vanadium (V), and zinc (Zn).
This document can also be applied for the digestion of other elements, provided the user has verified the applicability.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day