EN ISO 19085-1:2021
(Main)Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021)
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021)
This document gives the safety requirements and measures to reduce risks arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping, related to woodworking machines capable of continuous production use, hereinafter referred as "machines". These safety requirements and measures are those common to most of the machines, when they are used as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too.
The machines are designed to process solid wood and material with similar physical characteristics to wood, with hand feed or integrated feed.
This document is intended to be used in conjunction with the other parts of the ISO 19085 series, applicable to specific machine types. The extent to which all significant hazards of a specific machine type are covered is indicated in the specific part of the ISO 19085 series relevant to that machine type. The hazards covered, at least partly, by the requirements of this document, are listed in Annex A.
It is not applicable to machines intended for use in potential explosive atmospheres or to machines manufactured prior to the date of its publication.
Holzbearbeitungsmaschinen - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO 19085-1:2021)
Dieses Dokument nennt für Holzbearbeitungsmaschinen, die für den dauerhaften Einsatz in der Produktion geeignet sind, nachfolgend als „Maschinen“ bezeichnet, die Sicherheitsanforderungen und Maßnahmen zur Reduzierung der Risiken, die sich aus Betrieb, Einstellung, Instandhaltung, Transport, Montage, Demontage, Rückbau und Verschrottung ergeben. Hierbei handelt es sich um die Sicherheitsanforderungen und Maßnahmen, die für die meisten der Maschinen gelten, wenn sie bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen verwendet werden; vernünftigerweise vorhersehbare Fehlanwendung wurde ebenfalls berücksichtigt.
Die Maschinen dienen der Verarbeitung von Massivholz und Werkstoffen mit ähnlichen physikalischen Eigenschaften wie Holz, mit Handvorschub oder integriertem Vorschub.
Dieses Dokument wird bestimmungsgemäß in Verbindung mit den anderen Teilen der Normenreihe ISO 19085, die für bestimmte Typen von Maschinen anwendbar sind, verwendet. Der Umfang, in dem alle signifikanten Gefährdungen eines bestimmten Maschinentyps behandelt sind, ist in dem für diesen Maschinentyp zutreffenden Teil der Normenreihe ISO 19085 angegeben. Die Gefährdungen, die zumindest teilweise von den Anforderungen dieses Dokuments abgedeckt werden, sind in Anhang A aufgeführt.
Es gilt nicht für Maschinen, die zur Verwendung in potentiell explosiven Atmosphären vorgesehen sind, oder für Maschinen, die vor dem Datum seiner Veröffentlichung hergestellt wurden.
Machines à bois - Sécurité - Partie 1: Exigences communes (ISO 19085-1:2021)
Le présent document donne les exigences et mesures de sécurité pour réduire les risques survenant pendant le fonctionnement, le réglage, la maintenance, le transport, l'assemblage, le démontage, la mise hors service et la mise au rebut, relatifs aux machines à bois capables d'une utilisation en production continue, ci-après désignées "machines" et. Ces exigences et mesures de sécurité sont celles communes à la plupart des machines, lorsqu'elles sont utilisées comme prévu et dans les conditions prévues par le fabricant; une mauvaise utilisation raisonnablement prévisible a également été prise en compte.
Les machines sont conçues pour usiner du bois massif et des matériaux ayant des caractéristiques physiques similaires au bois, avec alimentation manuelle ou alimentation intégrée.
Le présent document est destiné à être utilisé conjointement avec les autres parties de la série ISO 19085, applicables aux types spécifiques de machine. La mesure dans laquelle tous les phénomènes dangereux significatifs d'un type de machine spécifique sont couverts est indiquée dans la partie spécifique de la série ISO 19085 relative à ce type de machine. Les phénomènes dangereux couverts, au moins en partie, par les exigences du présent document, sont énumérés à l'Annexe A.
Il n'est pas applicable aux machines prévues pour une utilisation en atmosphères explosibles, ni aux machines fabriquées avant sa date de publication.
Lesnoobdelovalni stroji - Varnost - 1. del: Splošne zahteve (ISO 19085-1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN ISO 19085-1:2017
SIST EN ISO 19085-1:2017/AC:2018
Lesnoobdelovalni stroji - Varnost - 1. del: Splošne zahteve (ISO 19085-1:2021)
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:20201)
Holzbearbeitungsmaschinen - Sicherheit - Teil 1: Gemeinsame Anforderungen (ISO
19085-1:2021)
Machines à bois - Sécurité - Partie 1: Exigences communes (ISO 19085-1:2021)
Ta slovenski standard je istoveten z: EN ISO 19085-1:2021
ICS:
13.110 Varnost strojev Safety of machinery
79.120.10 Lesnoobdelovalni stroji Woodworking machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19085-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 13.110 Supersedes EN ISO 19085-1:2017
English Version
Woodworking machines - Safety - Part 1: Common
requirements (ISO 19085-1:2021)
Machines à bois - Sécurité - Partie 1: Exigences Holzbearbeitungsmaschinen - Sicherheit - Teil 1:
communes (ISO 19085-1:2021) Gemeinsame Anforderungen (ISO 19085-1:2021)
This European Standard was approved by CEN on 13 February 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 19085-1:2021) has been prepared by Technical Committee ISO/TC 39 "Machine
tools" in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2021, and conflicting national standards shall
be withdrawn at the latest by October 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19085-1:2017.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19085-1:2021 has been approved by CEN as EN ISO 19085-1:2021 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request “M/396
Mandate to CEN and CENELEC for Standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence of this European Standard with Annex I of Directive 2006/42/EC
The relevant Essential Requirements Clauses/sub- Remarks/Notes
of Directive 2006/42/EC clauses of this EN
To confer a presumption of
conformity with the relevant
essential requirements of Directive
2006/42/EC, this standard
(providing common requirements
for a whole machine family) has to
be applied together with one of
those standards as specified in the
scope (providing specific
requirements for a particular
category of machinery within this
family), once this standard is cited in
the Official Journal of the European
Communities under Directive
2006/42/EC.
1.1.2 Principles of safety integration
a) fitted for its function Clauses 4, 5, 6, 7
b) eliminate or reduce the risks, give Clauses 4, 5, 6, 7
measures, inform
c) intended use and reasonably Clauses 4, 5, 6, 7
foreseeable misuse
d) constraints in use 6.5, 7.3
e) equipment 5.1, 7.3
1.1.3 Materials and products 5.2, 6.3
1.1.4 Lighting 6.6, 7.3
1.1.5 Design of machinery to facilitate its 6.5
handling
1.1.6 Ergonomics 6.5
1.2.1 Safety and reliability of control 4.1, 6.7, 6.8
systems
1.2.2 Control devices 4.2, 4.3, 4.4, 4.6, 4.7
1.2.3 Starting 4.3
1.2.4.1 Normal stop 4.4.1, 4.4.2
1.2.4.2 Operational stop 4.4.1, 4.4.3
1.2.4.3 Emergency stop 4.4.1, 4.4.4
1.2.5 Selection of control or operating 4.6
mode
1.2.6 Failure of the power supply 4.8, 6.7, 6.8
1.3.1 Risk of loss of stability 5.1, 7.3
1.3.2 Risk of break-up during operation 5.2, 7.3
1.3.3 Risks due to falling or ejected 5.2, 5.3, 5.5, 5.8, 5.9,
objects 7.3
1.3.4 Risk due to surfaces, edges or 6.15
angles
1.3.6 Risks relating to variations in the 4.7
operating conditions
1.3.7 Risks related to moving parts 5.6, 5.7, 7.3
1.3.8 Choice of protection against risks 5.5, 5.6
related to moving parts
1.4.1 General requirements 5.2, 5.5, 5.6, 5.9, 6.3
1.4.2.1 Fixed guards 5.5.1
1.4.2.2 Interlocking movable guards 5.5.2
1.4.2.3 Adjustable guards restricting 5.6
access
1.4.3 Special requirements for protective 5.5.3, 5.5.4, 5.5.5,
devices 5.5.6
1.5.1 Electricity supply 6.4, 6.13
1.5.2 Static electricity 6.11
1.5.3 Energy supply other than electricity 6.7, 6.8
1.5.4 Errors of fitting 6.12
1.5.6 Fire 6.1, 6.10
1.5.8 Noise 6.2
1.5.11 External radiation 6.9
1.5.12 Laser equipment 6.10
1.5.13 Emission of hazardous materials 6.3
and substances
1.6.1 Machinery maintenance 6.14, 7.3
1.6.2 Access to operating position and 4.2, 6.14, 7.3
servicing points
1.6.3 Isolation of energy sources 6.13, 7.3
1.6.4 Operator intervention 7.3
1.6.5 Cleaning of internal parts 6.14, 7.3
1.7.1.1 Information and information 6.10, 7.2
devices
1.7.1.2 Warning devices 6.10, 7.1
1.7.3 Marking of machinery 7.2
1.7.4 Instructions 6.10, 7.3, Annex F
2.3 Machinery for working wood and analogous materials
a) guiding 5.10
b) ejection 5.2, 5.3, 5.5, 5.9, 7.3
c) brake 4.5, 5.4
d) accidental tool contact 5.5, 5.6, 7.3
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 19085-1
Second edition
2021-03
Woodworking machines — Safety —
Part 1:
Common requirements
Machines à bois — Sécurité —
Partie 1: Exigences communes
Reference number
ISO 19085-1:2021(E)
©
ISO 2021
ISO 19085-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO 19085-1:2021(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Safety requirements and measures for controls . 6
4.1 Safety and reliability of control systems . 6
4.2 Control devices . 7
4.3 Start . 7
4.3.1 Direct start . 7
4.3.2 Start via control power-on . 7
4.4 Safe stops . 8
4.4.1 General. 8
4.4.2 Normal stop . 8
4.4.3 Operational stop . 9
4.4.4 Emergency stop . 9
4.5 Braking function of tools . 9
4.6 Mode selection .10
4.7 Tool speed changing .10
4.7.1 Speed changing by shifting the belts on the pulleys .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.