EN ISO 3677:2016

Filler metal for soldering and brazing - Designation (ISO 3677:2016)

ISO 3677:2016 specifies designations for filler materials for soldering and brazing, on the basis of their chemical composition. For brazing materials only, the designation includes their solidus/liquidus temperatures. This International Standard deals with the metallic part of filler materials used in soldering and brazing products, e.g. foils, wires, rods, pastes, flux coated rods/wires, flux cored rods/wires, etc.

Zusätze zum Weich- und Hartlöten - Bezeichnung (ISO 3677:2016)

Métaux d'apport de brasage tendre et de brasage fort - Désignation (ISO 3677:2016)

ISO 3677:2016 spécifie les désignations pour les métaux d'apport de brasage tendre et de brasage fort d'après leur composition chimique. Pour les produits de brasage fort uniquement, la désignation inclut leurs températures de solidus/liquidus. La présente Norme internationale traite de la partie métallique des métaux d'apport utilisés pour les produits de brasage tendre et de brasage fort, par exemple feuillards, fils, baguettes, pâtes, fils/baguettes enrobés de flux, fils/baguettes fourrés de flux, etc.

Dodajni materiali za mehko in trdo spajkanje - Označevanje (ISO 3677:2016)

Ta mednarodni standard določa označevanje dodajnih materialov za mehko in trdo spajkanje na podlagi njihove kemijske sestave. Samo pri materialih za trdo spajkanje označevanje vključuje temperature, pri katerih prehajajo iz trdnega v tekoče stanje. Ta mednarodni standard obravnava kovinski del dodajnih materialov, ki se uporabljajo pri mehkem in trdem spajkanju proizvodov, npr. folije, žice, palice, paste, palice/žice, prevlečene s talilom, palice/žice, izpolnjene s talilom itd.

General Information

• Status: Published
• Publication Date: 04-Oct-2016
• Withdrawal Date: 29-Apr-2017
• ICS: 25.160.50 - Brazing and soldering
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Oct-2016
• Completion Date: 05-Oct-2016
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 3677:2016 - Filler metal for soldering and brazing - Designation (ISO 3677:2016)

Relations

• Replaces: EN ISO 3677:1995 - Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992)
• Effective Date: 12-Oct-2016
• Revised: prEN ISO 3677 - Filler metal for brazing - Designation (ISO/DIS 3677:2023)
• Effective Date: 21-Dec-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3677:2016
01-december-2016
1DGRPHãþD
SIST EN ISO 3677:1997
'RGDMQLPDWHULDOL]DPHKNRLQWUGRVSDMNDQMH2]QDþHYDQMH,62
Filler metal for soldering and brazing - Designation (ISO 3677:2016)
Zusätze zum Weich- und Hartlöten - Bezeichnung (ISO 3677:2016)
Métaux d'apport de brasage tendre et de brasage fort - Désignation (ISO 3677:2016)
Ta slovenski standard je istoveten z: EN ISO 3677:2016
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 3677:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3677:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 3677:2016


EN ISO 3677
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2016
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 3677:1995
English Version

Filler metal for soldering and brazing - Designation (ISO
3677:2016)
Métaux d'apport de brasage tendre et de brasage fort - Zusätze zum Weich- und Hartlöten - Bezeichnung (ISO
Désignation (ISO 3677:2016) 3677:2016)
This European Standard was approved by CEN on 29 July 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3677:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3677:2016
EN ISO 3677:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3677:2016
EN ISO 3677:2016 (E)
European foreword
This document (EN ISO 3677:2016) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be
withdrawn at the latest by April 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 3677:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3677:2016 has been approved by CEN as EN ISO 3677:2016 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 3677:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 3677:2016
INTERNATIONAL ISO
STANDARD 3677
Third edition
2016-09-15
Filler metal for soldering and
brazing — Designation
Métaux d’apport de brasage tendre et de brasage fort — Désignation
Reference number
ISO 3677:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 3677:2016
ISO 3677:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Publishe
...