iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14555:2014

(Main)

Welding - Arc stud welding of metallic materials (ISO 14555:2014, Corrected version 2014-06-01)

Welding - Arc stud welding of metallic materials (ISO 14555:2014, Corrected version 2014-06-01)

ISO 14555:2014 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.
ISO 14555:2014 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.
ISO 14555:2014 has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction.

Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO 14555:2014, korrigierte Fassung 2014-06-01)

Diese Internationale Norm umfasst das Lichtbogenbolzenschweißen von metallischen Werkstoffen unter ruhender und Ermüdungsbeanspruchung. Sie legt die besonderen Anforderungen beim Bolzenschweißen in Bezug auf das schweißtechnische Fachwissen, die Qualitätsanforderungen, die Schweißanweisung, die Qualifizierung des Schweißverfahrens, die Bedienerprüfung und die Prüfung von Fertigungsschweißungen fest.
Diese Internationale Norm ist anzuwenden, wenn der Nachweis des Herstellers zur Erzeugung von geschweißten Konstruktionen einer bestimmten Qualität verlangt wird.
ANMERKUNG      Allgemeine Qualitätsanforderungen für Schmelzschweißungen an metallischen Werkstoffen sind in ISO 3834-1, ISO 3834-2, ISO 3834-3, ISO 3834-4 und ISO 3834-5 festgelegt.
Diese Internationale Norm ist als umfassendes Bezugsdokument für Verträge erarbeitet worden. Die gestellten Anforderungen können vollständig oder teilweise, sofern sie für die betreffende Konstruktion nicht relevant sind, übernommen werden (siehe Anhang

Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO 14555:2014, Version corrigée 2014-06-01)

L'ISO 14555:2014 couvre le soudage à l'arc des goujons en matériau métallique soumis à des chargements statiques et de fatigue. Elle spécifie les exigences particulières au soudage des goujons qui se rapportent aux connaissances en soudage, aux exigences de qualité, au descriptif de mode opératoire de soudage, à la qualification du descriptif de mode opératoire de soudage, aux épreuves de qualification des opérateurs et au contrôle des soudures de production.
L'ISO 14555:2014 est appropriée lorsqu'il est exigé de démontrer la capacité d'un fabricant à produire des fabrications soudées possédant une qualité spécifiée.
L'ISO 14555:2014 a été préparée dans un esprit d'exhaustivité pour lui permettre d'être utilisée comme référence dans les contrats. Les exigences qui sont données peuvent être adoptées en intégralité ou bien certaines d'entre elles peuvent être supprimées si elles ne sont pas pertinentes par rapport à la construction concernée.

Varjenje - Obločno varjenje čepov iz kovinskih materialov (ISO 14555:2014)

EN ISO 14555 zajema оbločno varjenje čepov iz kovinskih materialov, ki so statično ali dinamično obremenjeni. Podaja zahteve, ki veljajo za obločno varjenje, glede znanja o varjenju, zahtev po kakovosti, specifikacij varilnega postopka, kvalifikaciji varilnega postopka, kvalifikacijskem preskušanju operaterjev in preskušanju izdelanih zvarov. Ta mednarodni standard je primeren, kjer je treba pokazati zmogljivost proizvajalca za izdelavo varjene konstrukcije določene kakovosti.

General Information

Status
Withdrawn
Publication Date
22-Apr-2014
Withdrawal Date
13-Jun-2017
ICS
25.160.10 - Welding processes
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121 - Welding
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
14-Jun-2017
Ref Project
SIST EN ISO 14555:2014 - Welding - Arc stud welding of metallic materials (ISO 14555:2014)

Relations

Replaces
EN ISO 14555:2006 - Welding - Arc stud welding of metallic materials (ISO 14555:2006)
Effective Date
11-Dec-2010
Replaced By
EN ISO 14555:2017 - Welding - Arc stud welding of metallic materials (ISO 14555:2017)
Effective Date
13-Jan-2016

Buy Standard

EN ISO 14555:2014EN ISO 14555:2014
PreviousNext
Standard
EN ISO 14555:2014
English language
78 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14555:2014
01-julij-2014
1DGRPHãþD
SIST EN ISO 14555:2007
9DUMHQMH2EORþQRYDUMHQMHþHSRYL]NRYLQVNLKPDWHULDORY ,62
Welding - Arc stud welding of metallic materials (ISO 14555:2014)
Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO
14555:2014)
Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO 14555:2014)
Ta slovenski standard je istoveten z: EN ISO 14555:2014
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 14555:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14555:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 14555:2014

EUROPEAN STANDARD
EN ISO 14555

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2014
ICS 25.160.10 Supersedes EN ISO 14555:2006
English Version
Welding - Arc stud welding of metallic materials (ISO
14555:2014)
Soudage - Soudage à l'arc des goujons sur les matériaux Schweißen - Lichtbogenbolzenschweißen von metallischen
métalliques (ISO 14555:2014) Werkstoffen (ISO 14555:2014)
This European Standard was approved by CEN on 20 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14555:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14555:2014
EN ISO 14555:2014 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14555:2014
EN ISO 14555:2014 (E)
Foreword
This document (EN ISO 14555:2014) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at
the latest by October 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14555:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14555:2014 has been approved by CEN as EN ISO 14555:2014 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 14555:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 14555:2014

INTERNATIONAL ISO
STANDARD 14555
Third edition
2014‐05‐01

Welding — Arc stud welding of metallic
materials
Soudage — Soudage à l'arc des goujons sur les matériaux métalliques




Reference number
ISO 14555:2014(E)
©
ISO 2014

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9692-2:2024(Main)
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:2024)
oSIST prEN ISO 9692-2:2023

This document applies to types of joint preparation for submerged arc welding with one wire electrode (process 121 according to ISO 4063) on steel.
This document covers only the welding positions PA and PB according to ISO 6947. If PC is used, special preparation is necessary.
This document applies to fully penetrated welds. For partly penetrated welds, types of joint preparation, shapes and dimensions can differ from the listed proposals if they are specified in the relevant application standard or agreed by the parties concerned.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15610:2024(Main)
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2024)
oSIST prEN ISO 15610:2023

This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607.
In addition, it gives the range of qualification.
Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service.
This document is limited to:
—     butt welds and fillet welds in material of thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2);
—     fillet welds with throat thickness a ≥ 1 mm.
This document is not applicable when any of the following is specified for the welded joint:
a)       hardness;
b)       impact properties;
c)        preheating;
d)       controlled heat input;
e)       interpass temperature;
f)         post-weld heat treatment.
The use of this document can also be restricted by an application standard, specification or other documents.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14373:2024(Main)
Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2024)
SIST EN ISO 14373:2024

This document specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic-coated or weldable non-metallic-coated low-carbon steel, comprising two or three sheets of metal, where the maximum single-sheet thickness of components to be welded is within the range 0,4 mm to 3,0 mm.
This document is applicable to welding of sheets of the same or unequal thickness, where the thickness ratio is less than or equal to 3:1.
Welding with the following types of equipment is within the scope of this document:
a)       pedestal welding equipment;
b)       portable welding guns;
c)        automatic welding equipment where the components are fed by robots or automatic feeding equipment;
d)       multi-spot-welding machines;
e)       robotic welding machines.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15614-13:2023(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2023)
SIST EN ISO 15614-13:2024

This document specifies how a preliminary welding procedure specification (pWPS) is qualified by welding procedure tests.
This document defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all welding operations within the qualification of this document.
Two classes of welding procedure tests are given in order to permit application to a wide range of welded fabrication. They are designated by classes A and B. In class A, the extent of testing is greater and the ranges of qualification are more restrictive than in class B.
Procedure tests carried out to class A automatically qualify for class B requirements, but not vice-versa.
When no class is specified in a contract or application standard, all the requirements of class A apply.
NOTE          Class B corresponds to level 1 and class A corresponds to level 2 in accordance with ISO 15614-1.
This document applies to upset (resistance butt) welding and flash welding of any metallic materials in all product forms (e.g. with solid, tubular, flat or circular cross-sections). It covers the following resistance welding processes, as defined in ISO 4063:2023:
—     24 – flash welding, using direct current or alternating current with various movement sequences, constant flashing and pulsed flashing;
—     25 – resistance butt welding (upset welding), using direct current or alternating current with various current and pressure sequences.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25980:2023(Main)
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023, Corrected version 2023-08)
SIST EN ISO 25980:2023

This document specifies safety requirements for transparent welding curtains, strips and screens to be used in workplaces where arc welding is taking place. They are intended to provide protection against harmful levels of optical radiation and spatter for workers who are in the vicinity of arc welding processes but not involved in the welding itself. They are intended to reduce the discomfort glare from the arc but also allow sufficient luminous transmittance to permit a view into the workspace behind.
The transparent welding curtains can also be used in other applications as long as the UV- and blue-light emissions are less than in arc welding and the transmitted infrared irradiance is below applicable exposure limits. They are designed to be used at a distance from the arc of at least 1 m.
Welding curtains, strips and screens specified in this document are not intended to replace welding filters. For intentional viewing of welding arcs, other means of protection are used, see ISO 16321-1 and ISO 16321-2.
This document is not applicable to protection against laser radiation, for which ISO 19818-1 applies.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25901-2:2023(Main)
Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022)
SIST EN ISO 25901-2:2023

This document contains terms and definitions applicable to health and safety in welding and allied processes. It is intended to be referenced in other documents dealing with this subject.
In the main body of this document, terms are arranged in systematic order. Indexes are included at the end of this document in which all terms are listed alphabetically in English, French and German, respectively, with reference to the appropriate term numbers and translations of the terms in the other two languages.
NOTE: In addition to text written in the official ISO languages (English and French), this document gives text in German. This text is published under the responsibility of the member body for Germany (DIN) and is given for information only. Only the text given in the official languages can be considered as ISO text.

  • Standard
    86 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15614-12:2021(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2021)
SIST EN ISO 15614-12:2022

This document specifies the tests which can be used for qualification of welding procedure specifications for spot, seam, and projection welding processes.
NOTE       The procedures are written for embossed projection welding. They can be adapted for solid projections as well, e.g. nut welding, stud welding. cross wire welding.
This document defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by this document.
It covers the following resistance welding processes, as defined in ISO 4063:
—    21 – resistance spot welding;
—    211 – indirect spot welding;
—    212 – direct spot welding;
—    22 – resistance seam welding;
—    221 – lap seam welding;
—    222 – mash seam welding;
—    223 – Prep-lap seam welding;
—    224 – Wire seam welding;
—    225 – foil butt-seam welding;
—    226 – seam welding with strip;
—    23 – projection welding;
—    231 – indirect projection welding;
—    232 – direct projection welding.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3834-5:2021(Main)
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
SIST EN ISO 3834-5:2022

This document specifies the International Standards, including clauses and subclauses, with which conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 can be claimed.
NOTE      For brazing, see ISO 22688.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3834-1:2021(Main)
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
SIST EN ISO 3834-1:2021

This document specifies a general outline of the ISO 3834 series and criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials, among the three levels specified in ISO 3834-2, ISO 3834-3 and ISO 3834-4.
It is applicable to manufacturing, both in workshops and at field installation sites.
This document does not specify requirements for a total quality management system (QMS). However, Clause 6 identifies QMS elements where their inclusion complements the ISO 3834 series.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13918:2018/A1:2021(Amendment)
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
SIST EN ISO 13918:2018/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day