EN ISO 17292:2004

Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004)

ISO 17292:2004 specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. It covers valves of the nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450 and 500, corresponding to nominal pipe sizes NPS 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18 and 20, and is applicable for pressure designations of Class 150, 300, 600 and 800 (the last applicable only for valves with reduced bore and with threaded and socket welding end), and PN 16, 25 and 40.

Kugelhähne aus Metall für Erdöl-, petrochemische und verwandte Industrien (ISO 17292:2004)

Diese Internationale Norm legt die Anforderungen an eine Reihe von Kugelhähnen aus Metall fest, die für den Einsatz in Anlagen der Erdöl-, petrochemischen, Erdgas- und verwandten Industrien geeignet sind.
Sie gilt für Armaturen mit den Nennweiten DN
-   8; 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500
entsprechend den Rohr-Nennweiten NPS
-   ¼; 3/8; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20und für folgende Druckbezeichnungen:
-   Class 150; 300; 600; 800 (Class 800 gilt nur für Armaturen mit reduziertem Durchgang sowie Gewinde- und Schweißmuffenenden);
-   PN 16; 25; 40.
Die Norm enthält Festlegungen zur Prüfung und Inspektion sowie zu folgenden Armaturen-Merkmalen:
-   Flansch- und Anschweißenden: in den Nennweiten 15 £ DN £ 500 (½ £ NPS £ 20);
-   Schweißmuffen- und Gewindeenden: in den Nennweiten 8 £ DN £ 50 (¼ £ NPS £ 2);
-   Gehäusesitzöffnungen mit vollem, reduziertem oder zweifach reduziertem Durchgang;
Werkstoffe.

Robinets à tournant sphérique pour les industries du pétrole, de la pétrochimie et les industries connexes (ISO 17292:2004)

L'ISO 17292:2004 spécifie les exigences pour une série de robinets à tournant sphérique métalliques appropriés aux installations pétrolières, pétrochimiques et de gaz naturel, ainsi qu'aux applications industrielles connexes. Elle est applicable aux appareils de robinetterie de diamètres nominaux DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500, correspondant aux dimensions nominales de tuyauterie NPS 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18 et 20, et s'applique aux désignations de pressions Class 150, 300, 600, 800 (ce dernier s'appliquant uniquement aux appareils de robinetterie à extrémités filetées et à emboîter et à souder), et PN 16, 25, 40.

Kovinski krogelni ventili za naftno industrijo, petrokemijo in podobno industrijo (ISO 17292:2004)

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2004
• Withdrawal Date: 08-Dec-2015
• ICS: 23.060.20 - Ball and plug valves
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 5 - Plug and ball valves
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 09-Dec-2015
• Ref Project: SIST EN ISO 17292:2004 - Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004)

Relations

• Replaced By: EN ISO 17292:2015 - Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
• Effective Date: 07-May-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17292:2004
01-november-2004
Kovinski krogelni ventili za naftno industrijo, petrokemijo in podobno industrijo
(ISO 17292:2004)
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004)
Kugelhähne aus Metall für Erdöl-, petrochemische und verwandte Industrien (ISO
17292:2004)
Robinets a tournant sphérique pour les industries du pétrole, de la pétrochimie et les
industries connexes (ISO 17292:2004)
Ta slovenski standard je istoveten z: EN ISO 17292:2004
ICS:
23.060.20 Zapirni ventili (kroglasti in Ball and plug valves
pipe)
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
SIST EN ISO 17292:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17292:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 17292:2004
EUROPEAN STANDARD
EN ISO 17292
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2004
ICS 75.200; 23.060.20

English version
Metal ball valves for petroleum, petrochemical and allied
industries (ISO 17292:2004)
Robinets à tournant sphérique pour les industries du
pétrole, de la pétrochimie et les industries connexes (ISO
17292:2004)
This European Standard was approved by CEN on 22 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17292:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17292:2004

EN ISO 17292:2004 (E)





Foreword


This document (EN ISO 17292:2004) has been prepared by Technical Committee ISO/TC 153
"Valves" in collaboration with Technical Committee CEN/TC 69 "Industrial valves", the
secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2005, and conflicting national
standards shall be withdrawn at the latest by February 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 17292:2004 has been approved by CEN as EN ISO 17292:2004 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17292:2004


INTERNATIONAL ISO
STANDARD 17292
First edition
2004-08-01


Metal ball valves for petroleum,
petrochemical and allied industries
Robinets à tournant sphérique pour les industries du pétrole, de la
pétrochimie et les industries connexes




Reference number
ISO 17292:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 17292:2004
ISO 17292:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters w
...