iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 718:1995

(Main)

Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings

Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings

This European Standard specifies a method for determining the mass per unit area of a reinforcement or backing of a polyvinyl chloride-based floor covering.

Elastische Bodenbeläge - Bestimmung der flächenbezogenen Masse von Verstärkung oder Rücken von Bodenbelägen aus Polyvinylchlorid

Diese Norm legt ein Verfahren zur Bestimmung des flächenbezogenen Masse einer Verstärkung oder des Rückens eines elastischen Bodenbelags auf der Basis von Polyvinylchlorid fest.

Revêtements de sol résilients - Détermination de la masse surfacique de l'armature ou du support d'un revêtement de sol à base de polychlorure de vinyle

La présente norme europénne prescrit une méthode de détermination de la masse surfacique de l'armature ou du support d'un revêtement de sol à base de polychlorure de vinyle.

Netekstilne talne obloge - Ugotavljanje ploščinske mase okrepitve ali hrbtišča polivinilkloridnih talnih oblog

General Information

Status
Withdrawn
Publication Date
12-Dec-1995
Withdrawal Date
19-Aug-2013
ICS
91.060.30 - Ceilings. Floors. Stairs
Technical Committee
CEN/TC 134 - Resilient and textile floor coverings
Drafting Committee
CEN/TC 134/WG 3 - Plastics floor coverings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Aug-2013
Completion Date
20-Aug-2013
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 718:1999 - Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings

Buy Standard

EN 718:1999EN 718:1999
PreviousNext
Standard
EN 718:1999
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 718:1999
01-marec-1999
1HWHNVWLOQHWDOQHREORJH8JRWDYOMDQMHSORãþLQVNHPDVHRNUHSLWYHDOLKUEWLãþD
SROLYLQLONORULGQLKWDOQLKREORJ
Resilient floor coverings - Determination of mass per unit area of a reinforcement or a
backing of polyvinyl chloride floor coverings
Elastische Bodenbeläge - Bestimmung der flächenbezogenen Masse von Verstärkung
oder Rücken von Bodenbelägen aus Polyvinylchlorid
Revetements de sol résilients - Détermination de la masse surfacique de l'armature ou
du support d'un revetement de sol a base de polychlorure de vinyle
Ta slovenski standard je istoveten z: EN 718:1995
IC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16165:2021(Main)
Determination of slip resistance of pedestrian surfaces - Methods of evaluation
SIST EN 16165:2021

This document specifies test methods for determining the slip resistance of surfaces used by pedestrians.
NOTE   It is also possible to use this document for measurements where persons might walk on trafficked areas.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16283-2:2020(Main)
Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2020)
SIST EN ISO 16283-2:2020

This document specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or stairs in a building. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the impact sound insulation in unfurnished or furnished rooms where the sound field may or may not approximate to a diffuse field.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13629:2020(Main)
Wood flooring - Solid individual and pre-assembled hardwood boards
SIST EN 13629:2020

This document specifies the characteristics of individual hardwood boards and pre-assembled hardwood boards with grooves and/or tongues for internal use as flooring. This document covers hardwood boards with or without surface coating.
This document does not cover solid parquet elements. (See Annex C).

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1534:2020(Main)
Wood flooring and parquet - Determination of resistance to indentation - Test method
SIST EN 1534:2020

This document specifies a method, derived from the test, for determining the resistance to indentation of wood flooring.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16929:2018(Main)
Test methods - Timber floors - Determination of vibration properties
SIST EN 16929:2019

This document specifies test methods for the determination of natural frequencies, damping, unit point load deflection and acceleration of floors composed of sawn timber, engineered wood products, and mass timber beams or slabs (e.g. cross laminated timber CLT, glued laminated timber GL, nail laminated timber), with or without concrete screeds, as well as for timber-concrete composite floors.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15254-7:2018(Main)
Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
SIST EN 15254-7:2018

This document defines rules for extended applications, provides guidance, and, where appropriate, specifies procedures, for variations of certain parameters and factors associated with the design of internal non-loadbearing ceilings constructed of metal faced sandwich panels that have been tested in accordance with EN 1364-2, which could generate a classification in accordance with EN 13501-2.
This document applies to self-supporting, double skin metal faced sandwich panels, which have an insulating core bonded to both facings as defined in EN 14509.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1364-2:2018(Main)
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings
SIST EN 1364-2:2018

This part of EN 1364 specifies a method for determining the fire resistance of ceilings, which in themselves possess fire resistance independent of any building element above them. This European Standard is used in conjunction with EN 1363-1.
The method is applicable to ceilings, which are either suspended by hangers or fixed directly to a supporting frame or construction, and to self-supporting ceilings.
Within this test method, the ceiling is exposed to fire, with the exposure being applied either:
a)   from below the ceiling, or
b)   from above the ceiling to simulate fire within the cavity above the ceiling.
The contribution to fire resistance which a suspended ceiling might provide as a protective membrane to loadbearing elements is determined using the procedure given in EN 13381-1. The fire resistance of loadbearing floors in conjunction with a suspended ceiling can also be assessed by using tests according to EN 1365-2.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1365-2:2014(Main)
Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
SIST EN 1365-2:2014

This European Standard specifies a method for determining the fire resistance of:
- floor constructions, without cavities or with unventilated cavities;
- roof constructions, with or without cavities (ventilated or unventilated);
- floor and roof constructions incorporating glazing;
with fire exposure from the underside.
This European Standard is used in conjunction with EN 1363-1.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16487:2014(Main)
Acoustics - Test code for suspended ceilings - Sound absorption
SIST EN 16487:2015

This European Standard specifies additional necessary information on how to carry out efficiently and under standardized conditions the determination of the sound absorption coefficients according to EN ISO 354 “Measurement of sound absorption in a reverberation room”. It specifies the additional requirements of the sound absorption measurements and the operating and mounting conditions that should be used for the test. Observe that all demands in EN ISO 354 still should be fulfilled. The results obtained are used for design calculations with respect to room acoustics and to convert frequency-dependent sound absorption coefficients into a weighted sound absorption coefficient αw, according to EN ISO 11654.
This European Standard is applicable for the compile of the single number rating αw, to express the sound absorption performance of suspended ceiling membranes in CE marking and labelling according to EN 13964. This European Standard is not applicable for suspended ceiling kits according to EN 13964.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16481:2014(Main)
Timber stairs - Structural design - Calculation methods
SIST EN 16481:2014

This European Standard constitutes a frame standard for the design of timber stairs as well as wood and wood-based components used in stairs by calculation methods. Some calculation methods can be derived from testing results, for example CEN/TS 15680. This document specifies the design and the requirements for materials and components to be used in these calculation methods. It may be complemented by national application documents based on this European Standard.
This European Standard applies to coated and uncoated components. This document covers load-bearing components such as strings, treads, risers, posts and guardrails. Requirements for a timber stair are defined in the product standard, EN 15644. This document does not cover stairs that contribute to the overall stability of the works or the strength of the structure.
This European Standard is valid for the verification of mechanical performance characteristics, usability and load-bearing capacity and their related durability. Other requirements, e.g. requirements for acoustic properties, are not covered by this European Standard.
For the design, calculation and determination of not solely resting actions, additional requirements need to be taken into account (to be checked).
For the dimensioning with special reference to resistance to fire and earthquake/seismic action, additional requirements may be taken into account.
Without further verification, the methods in this European Standard are valid for different types of stair structures and their components, as illustrated in Figure 1:
(...)

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day