iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10140-1:2010/A1:2012

(Amendment)

Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products - Amendment 1: Guidelines for the determination of the sound reduction index of joints filled with fillers and/or seals (ISO 10140-1:2010/Amd 1:2012)

Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products - Amendment 1: Guidelines for the determination of the sound reduction index of joints filled with fillers and/or seals (ISO 10140-1:2010/Amd 1:2012)

2010-11-30: ISO agreed for CCMC to launch 3 month UAP when we receive the notification from ISO for the FDIS
2008 09 26 This new project is a complement to the draft of part 1 providing guidelines for a certain category of tests. This amendment will be an annex to the base document and its content does not modify the text of part 1.

Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 1: Anwendungsregeln für bestimmte Produkte - Änderung 1: Leitlinie zur Bestimmung des Schalldämm-Maßes von Fugen, die mit Füllstoffen und/oder Dichtungen ausgefüllt sind (ISO 10140-1:2010/Amd 1:2012)

Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 1: Règles d'application pour produits particuliers - Amendement 1: Lignes directrices pour la détermination de l'indice de réduction acoustique de joints comblés de matière de remplissage et/ou d'éléments d'étanchéité (ISO 10140-1:2010/Amd 1:2012)

Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 1. del: Pravila uporabe za določene izdelke - Dopolnilo A1: Smernice za ugotavljanje indeksa zvočne izolirnosti stikov, polnjenih s polnili in/ali tesnili (ISO 10140-1:2010/Amd 1:2012)

Ta del ISO 10140 določa preskusne zahteve za gradbene elemente in izdelke, vključno z podrobnimi zahtevami za pripravljalne, namestitvene, obratovalne in preskusne pogoje ter prav tako z ustreznimi količinami in dodatnimi informacijami o preskušanju za poročanje. Splošni postopki za ukrepe izolirnosti pred zvokom v zraku in udarnim zvokom so podani v ISO 10140-2 in ISO 10140-3 v tem zaporedju.

General Information

Status
Withdrawn
Publication Date
31-Jan-2012
Withdrawal Date
23-Aug-2016
ICS
91.120.20 - Acoustics in building. Sound insulation
Technical Committee
CEN/TC 126 - Acoustic properties of building products and of buildings
Drafting Committee
CEN/TC 126 - Acoustic properties of building products and of buildings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
24-Aug-2016
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN ISO 10140-1:2010/A1:2012 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products - Amendment 1: Guidelines for the determination of the sound reduction index of joints filled with fillers and/or seals (ISO 10140-1:2010/Amd 1:2012)

Relations

Replaced By
EN ISO 10140-1:2016 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
Effective Date
27-Aug-2014
Amends
EN ISO 10140-1:2010 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2010)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 10140-1:2010/A1:2012EN ISO 10140-1:2010/A1:2012
PreviousNext
Amendment
EN ISO 10140-1:2010/A1:2012
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10140-1:2010/A1:2012
01-april-2012
$NXVWLND/DERUDWRULMVNRPHUMHQMH]YRþQHL]ROLUQRVWLJUDGEHQLKHOHPHQWRYGHO
3UDYLODXSRUDEH]DGRORþHQHL]GHONH'RSROQLOR$6PHUQLFH]DXJRWDYOMDQMH
LQGHNVD]YRþQHL]ROLUQRVWLVWLNRYSROQMHQLKVSROQLOLLQDOLWHVQLOL ,62
$PG
Acoustics - Laboratory measurement of sound insulation of building elements - Part 1:
Application rules for specific products - Amendment 1: Guidelines for the determination
of the sound reduction index of joints filled with fillers and/or seals (ISO 10140-
1:2010/Amd 1:2012)
Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 1:
Anwendungsregeln für bestimmte Produkte - Änderung 1: Leitlinie zur Bestimmung des
Schalldämm Maßes von Fugen, die mit Füllstoffen und/oder Dichtungen ausgefüllt sind
(ISO 10140-1:2010/Amd 1:2012)
Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de
construction - Partie 1: Règles d'application pour produits particuliers - Amendement 1:
Lignes directrices pour la détermination de l'indice de réduction acoustique de joints
comblés de matière de remplissage et/ou d'éléments d'étanchéité (ISO 10140-
1:2010/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 10140-1:2010/A1:2012
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 10140-1:2010/A1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10140-1:2010/A1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 10140-1:2010/A1:2012


EUROPEAN STANDARD
EN ISO 10140-1:2010/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2012
ICS 91.120.20
English Version
Acoustics - Laboratory measurement of sound insulation of
building elements - Part 1: Application rules for specific products
- Amendment 1: Guidelines for the determination of the sound
reduction index of joints filled with fillers and/or seals (ISO
10140-1:2010/Amd 1:2012)
Acoustique - Mesurage en laboratoire de l'isolation Akustik - Messung der Schalldämmung von Bauteilen im
acoustique des éléments de construction - Partie 1: Règles Prüfstand - Teil 1: Anwendungsregeln für bestimmte
d'application pour produits particuliers - Amendement 1: Produkte - Änderung 1: Leitlinie zur Bestimmung des
Lignes directrices pour la détermination de l'indice de Schalldämm Maßes von Fugen, die mit Füllstoffen
réduction acoustique de joints comblés de matière de und/oder Dichtungen ausgefüllt sind (ISO 10140-
remplissage et/ou d'éléments d'étanchéité (ISO 10140- 1:2010/Amd 1:2012)
1:2010/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 10140-1:2010; it was approved by CEN on 23 January 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10140-1:2010/A1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10140-1:2010/A1:2012
EN ISO 10140-1:2010/A1:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10140-1:2010/A1:2012
EN ISO 10140-1:2010/A1:2012 (E)
Foreword
This document (EN ISO 10140-1:2010/A1:2012) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of build
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16032:2024(Main)
Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method (ISO 16032:2024)
kSIST FprEN ISO 16032:2024

This document specifies an engineering method for the measurement of sound pressure levels in rooms from service equipment installed in the building.
This document covers specifically measurements of sound from sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, heating devices, blowers, pumps and other auxiliary service equipment, and motor driven car park doors. It can also be applied to measurements of sounds from other types of equipment or activities within the building, e.g. noise from sport facilities or restaurants.
The measurement of noise from external sound sources generating air-borne or ground-borne noise in the building are not included in this document.
The methods are suitable for rooms with volumes of approximately 300 m3 or less for instance, in dwellings, hotels, schools, offices and hospitals.
The methods are not intended for measurements in large auditoria or concert halls.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12354-5:2023(Main)
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 5: Sounds levels due to the service equipment
SIST EN 12354-5:2023

This document describes calculation models to estimate the sound pressure level in buildings due to service equipment. As for the field measurement documents (EN ISO 16032 for the engineering method and EN ISO 10052 for the survey method), it covers sanitary installations, mechanical ventilation, heating and cooling, service equipment, lifts, rubbish chutes, boilers, blowers, pumps and other auxiliary service equipment, and motor driven car park doors, but can also be applied to others equipment attached to or installed in buildings. The estimation is generally based on measured data that characterizes both the equipment (source) and the sound transmission through the building. The same equipment can be composed of different airborne and/or structure borne sources at different locations in the building; the standard gives some information on these sources and how they can be characterized; however, models of the equipment itself are out of the scope of this standard.
This document describes the principles of the calculation models, lists the relevant input and output quantities and defines its applications and restrictions. The models given are applicable to calculations in frequency bands. It is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of building construction, considering local circumstances.
The calculation models described use the most general approach for engineering purposes, with a link to measurable input quantities that specify the performance of building elements and equipment. However, it is important for users to be aware that other calculation models also exist, each with their own applicability and restrictions.
The models are based on experience with predictions for dwellings and offices; they could also be used for other types of buildings provided the dimensions of constructions are not too different from those in dwellings.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3382-3:2022(Main)
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2022)
SIST EN ISO 3382-3:2022

This document specifies a method for the measurement of room acoustic parameters in unoccupied open-plan offices. It specifies measurement procedures, the apparatus needed, the coverage required, the method for evaluating the data, and the presentation of the test report.
This document describes a group of single-number quantities indicating the room acoustic performance of an open-plan office in a condition when one person is speaking. They focus on spatial decay of speech while the quantities in ISO 3382-2 focus on temporal decay of sound.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10052:2021(Main)
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)
SIST EN ISO 10052:2021

This document specifies field survey methods for measuring
a) airborne sound insulation between rooms,
b) impact sound insulation of floors,
c) airborne sound insulation of façades, and
d) sound pressure levels in rooms caused by service equipment.
The methods described in this document are applicable for measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m3.
For airborne sound insulation, impact sound insulation and façade sound insulation the method gives values which are (octave band) frequency dependent. They can be converted into a single number characterising the acoustical performances by application of ISO 717-1 and ISO 717-2. For heavy/soft impact sound insulation, the results also are given as A-weighted maximum impact sound pressure level. For service equipment sound the results are given directly in A - or C -weighted sound pressure levels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-1:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2021)
SIST EN ISO 10140-1:2021

This document specifies test requirements for the laboratory measurement of the sound insulation of building elements and products, including detailed requirements for the preparation and mounting of the test elements, and for the operating and test conditions. It also specifies the applicable quantities, and provides additional test information for reporting.
The general procedures for airborne and impact sound insulation measurements are given in ISO 10140‑2 and ISO 10140-3, respectively.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-4:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
SIST EN ISO 10140-4:2021

This document specifies the basic measurement procedures for airborne and impact sound insulation of building elements in laboratory test facilities.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-3:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
SIST EN ISO 10140-3:2021

This document specifies laboratory methods for measuring the impact sound insulation of floor assemblies.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings.
The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor.
A test method is specified that uses the standard tapping machine (see ISO 10140-5:2021, Annex E) to simulate impact sources like human footsteps when a person is wearing shoes. Alternative test methods, using a modified tapping machine or a heavy/soft impact source (see ISO 10140-5:2021, Annex F) to simulate impact sources with strong low frequency components, such as human footsteps (bare feet) or children jumping, are also specified.
This document is applicable to all types of floors (whether heavyweight or lightweight) with all types of floor coverings. The test methods apply only to laboratory measurements.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-2:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)
SIST EN ISO 10140-2:2021

This document specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, façade elements, façades, glazing, small technical elements, for instance transfer air devices, airing panels (ventilation panels), outdoor air intakes, electrical raceways, transit sealing systems and combinations, for example walls or floors with linings, suspended ceilings or floating floors.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings.
The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions and total loss factor.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10140-5:2021(Main)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
SIST EN ISO 10140-5:2021

This document specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as:
—    components and materials;
—    building elements;
—    technical elements (small building elements);
—    sound insulation improvement systems.
It is applicable to laboratory test facilities with suppressed radiation from flanking elements and structural isolation between source and receiving rooms.
This document specifies qualification procedures for use when commissioning a new test facility with equipment for sound insulation measurements. It is intended that these procedures be repeated periodically to ensure that there are no issues with the equipment and the test facility.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 717-1:2020(Main)
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2020)
SIST EN ISO 717-1:2021

This document
a)   defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows,
b)   takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building, and
c)   gives rules for determining these quantities from the results of measurements carried out in one-third-octave or octave bands for example in accordance with ISO 10140-2 and ISO 16283-1.
The single-number quantities in accordance with this document are intended for rating airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms). The required numerical values of the single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands.
For laboratory measurements made in accordance with ISO 10140-2, single-number quantities are calculated using one-third-octave bands only.
The rating of results of measurements carried out over an enlarged frequency range is dealt with in Annex B.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day