EN 10216-1:2002

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

This Part of EN 10216 specifies the technical delivery conditions for two qualities TR1 and TR2 of seamless tubes of circular cross section with specified room temperature properties made of non-alloy quality steel.

Nahtlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur

Dieser Teil der EN 10216 enthält die techni-schen Lie-fer-be-din-gun-gen für zwei Güten, TR1 und TR2, nahtloser- Roh-re mit kreis-förmi-gem Querschnitt aus unlegiertem Stahl mit fest-ge-leg-ten Eigenschaften bei Raumtemperatur.

Tubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non allié avec caractéristiques spécifiées à température ambiante

La présente partie de la norme européenne spécifie les conditions techniques de livraison pour deux qualités, TR1 et TR2, de tubes sans soudure à section circulaire fabriqués en acier non allié de qualité, avec caractéristiques spécifiées à température ambiante.

Nevarjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 1. del: Nelegirane jeklene cevi s specificiranimi lastnostmi za delo pri sobni temperaturi

General Information

• Status: Withdrawn
• Publication Date: 21-May-2002
• Withdrawal Date: 10-Dec-2013
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 1 - Tubes for pressure purposes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-Dec-2013
• Completion Date: 11-Dec-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/10 - ECISS - 3rd programme
• Ref Project: SIST EN 10216-1:2003 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

Relations

• Replaced By: EN 10216-1:2013 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
• Effective Date: 18-Dec-2013
• Amended By: EN 10216-1:2002/A1:2004 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nahtlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei RaumtemperaturTubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non allié avec caractéristiques spécifiées a température ambianteSeamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10216-1:2002SIST EN 10216-1:2003en01-april-2003SIST EN 10216-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10216-1May 2002ICS 23.040.10; 77.140.75English versionSeamless steel tubes for pressure purposes - Technical deliveryconditions - Part 1: Non-alloy steel tubes with specified roomtemperature propertiesTubes sans soudure en acier pour service sous pression -Conditions techniques de livraison - Partie 1: Tubes enacier non allié avec caractéristiques spécifiées àtempérature ambianteNahtlose Stahlrohre für Druckbeanspruchungen -Technische Lieferbedingungen - Teil 1: Rohre ausunlegierten Stählen mit festgelegten Eigenschaften beiRaumtemperaturThis European Standard was approved by CEN on 25 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10216-1:2002 ESIST EN 10216-1:2003

inspection and testing.1710SAMPLING.1810.1Frequency of tests.1810.2Preparation of samples and test pieces.1911TEST METHODS.2011.1Chemical analysis.2011.2Tensile test.2011.3Impact test.2011.4Leak tightness test.2111.5Dimensional inspection.2111.6Visual examination.2211.7Non-DestructiveTesting.2211.8Retest, sorting and reprocessing.2212MARKING.2212.1Marking to be applied.2212.2Additional marking.2313PROTECTION.23Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU directives.24SIST EN 10216-1:2003

Part 1 : Method of test (at ambient temperature).EN 10020, Definition and classification of grades of steel.EN 10021, General technical delivery requirements for steel and iron products.EN 10027-1, Designation systems for steels - Part 1 : Steel names, principle symbols.EN 10027-2, Designation systems for steels Part 2 : Numerical systems.EN 10045-1, Metallic materials - Charpy impact test Part 1 : Test method.EN 10052, Vocabulary of heat treatment terms for ferrous products.EN 10204, Metallic products - Types of inspection documents.ENV 10220, Seamless and welded steel tubes - Dimensions and masses per unit length.EN 10246-1, Non-Destructive Testing
of steel tubes Part 1 : Automatic electromagnetic testing of seamlessand welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.EN 10246-3, Non-Destructive Testing
of steel tubes - Part 3 :Automatic eddy current testing of seamless andwelded (except submerged arc-welded) steel tubes for the detection of imperfections.EN 10246-5, Non-Destructive Testing
of steel tubes – Part 5: Automatic full peripheral magnetictransducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steeltubes for the detection of longitudinal imperfections.EN 10246-7, Non-Destructive Testing
of steel tubes - Part 7 : Automatic full peripheral ultrasonic testing ofseamless and welded (except submerged arc welded) steel tubes for the detection of longitudinalimperfections.EN 10256, Non-DestructiveTesting of steel tubes - Qualification and competence of level 1 and level 2 NDTpersonnel.prEN 101681), Iron and steel products - Inspection documents - List of information and description
1)In preparation, until this document is published as European Standard, the corresponding National standard should beagreed at the time of enquiry and order.SIST EN 10216-1:2003
...