EN ISO 14050:2020/prA1
(Amendment)Environmental management - Vocabulary - Amendment 1 (ISO 14050:2020/DAM 1:2022)
Environmental management - Vocabulary - Amendment 1 (ISO 14050:2020/DAM 1:2022)
This document defines terms used in documents in the fields of environmental management systems and tools in support of sustainable development. These include management systems, auditing and other types of assessment, communications, footprinting studies, greenhouse gas mitigation and adaptation to climate change.
Umweltmanagement - Begriffe - Änderung A1 (ISO 14050:2020/DAM 1:2022)
Dieses Dokument definiert Begriffe, die in Dokumenten in den Bereichen Umweltmanagementsysteme und Instrumente zur Unterstützung einer nachhaltigen Entwicklung verwendet werden. Dazu gehören Managementsysteme, Auditierung und andere Arten der Bewertung, Kommunikation, Footprinting Studien, Verringerung von Treibhausgasemissionen und Anpassung an den Klimawandel.
Management environnemental - Vocabulaire - Amendement 1 (ISO 14050:2020/DAM 1:2022)
Le présent document définit les termes dans les documents relatifs aux domaines des systèmes de management environnemental et aux outils venant à l'appui du développement durable, ce qui inclut les systèmes de management, les audits et les autres types d'évaluation, les communications, les études d'empreinte, l'atténuation des gaz à effet de serre et l'adaptation au changement climatique.
Ravnanje z okoljem - Slovar - Dopolnilo A1 (ISO 14050:2020/DAM 1:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2022
Ravnanje z okoljem - Slovar - Dopolnilo A1 (ISO 14050:2020/DAM 1:2022)
Environmental management - Vocabulary - Amendment 1 (ISO 14050:2020/DAM
1:2022)
Umweltmanagement - Begriffe (ISO 14050:2020)
Management environnemental Vocabulaire Amendement 1
Ta slovenski standard je istoveten z: EN ISO 14050:2020/prA1
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.020.10 Ravnanje z okoljem Environmental management
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT AMENDMENT
ISO 14050:2020/DAM 1
ISO/TC 207 Secretariat: SCC
Voting begins on: Voting terminates on:
2022-08-04 2022-10-27
Environmental management — Vocabulary
AMENDMENT 1
Management environnemental — Vocabulaire
AMENDEMENT 1
ICS: 13.020.10; 01.040.13
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 14050:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
ISO 14050:2020/DAM 1:2022(E)
DRAFT AMENDMENT
ISO 14050:2020/DAM 1
ISO/TC 207 Secretariat: SCC
Voting begins on: Voting terminates on:
Environmental management — Vocabulary
AMENDMENT 1
Management environnemental — Vocabulaire
AMENDEMENT 1
ICS: 13.020.10; 01.040.13
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 14050:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
ISO 14050:2020/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 207, Environmental management, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/SS
S26, Environmental management, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 14050:2009), which has been technically
revised. The fourth edition is structured differently from the third edition. It presents a more generic
vocabulary of environmental management terminology.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
ISO 14050:2020/DAM 1:2022(E)
Environmental management — Vocabulary
AMENDMENT 1
1 Normative references
There are no normative references in this document.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.5 Terms relating to product systems
3.5.1
product system
collection of unit processes (3.6.16) with elementary flows (3.5.14) and product flows (5.163.), performing
one or more defined functions and which models the life cycle (3.6.1) of a product (3.5.20)
3.5.2
process energy
energy input required for operating the process (3.1.9) or equipment within a unit process (3.6.16),
excluding energy inputs for production and delivery of the process energy itself
3.5.3
energy use
manner or kind of application of energy
3.5.4
product system value
worth or desirability ascribed to a product system (3.5.1)
3.5.5
product system value indicator
numerical quantity representing the product system value (3.5.4)
3.5.6
double counting
accounting for the inputs or outputs of a process (3.1.9) more than once
ISO 14050:2020/DAM 1:2022(E)
3.5.7
product standard
standard that specifies requirements (3.1.15) to be fulfilled by a product (3.5.20) or group of products,
to establish its fitness for purpose (3.5.8)
3.5.8
fitness for purpose
ability of a product (3.5.20) or a process (3.1.9) to serve a defined purpose under specific conditions
3.5.9
product environmental criteria
〈environmental labelling〉 environmental requirements (3.1.15) that the product (3.5.20) has to meet in
order to be awarded an environmental label (3.7.1)
3.5.10
product environmental aspect
element of a product (3.5.20) that, during its life cycle (3.6.1), can interact with the environment (3.2.2)
3.5.11
performance tracking of an organization
comparison of the performance (3.1.12) of the same organization’s (3.1.1) products (3.5.20) and unit
processes (3.6.16) over time, based on the same time period, system boundary (3.6.17) and reporting
unit
3.5.12
functional unit
quantified performance (3.1.12) of a product system (3.5.1) for use as a reference unit
3.5.13
reference flow
measure of the outputs from processes (3.1.9) in a given product system (3.5.1) required to fulfil the
function expressed by the functional unit (3.5.12)
3.5.14
elementary flow
material or energy entering the system being studied that has been drawn from the environment (3.2.2)
without previous human transformation (3.8.3), or material or energy leaving the system being studied
that is released into the environment without subsequent human transformation
3.5.15
intermediate flow
product flow (3.5.16), material flow (3.5.17) or energy flow (3.5.18) occurring between unit processes
(3.6.16) of the product system (3.5.1) being studied
3.5.16
product flow
ISO 14050:2020/DAM 1:2022(E)
products (3.5.20) entering from or leaving to another product system (3.5.1)
3.5.17
material flow
input or output of a material or group of materials
3.5.18
energy flow
input to or output from a unit process (3.6.16), an information module (3.6.41) or a product system (3.5.1),
quantified in energy units
3.5.19
allocation
partitioning the input or output of a process (3.1.9) or a product system (3.5.1) between the product
system under study and one or more other product systems
3.5.20
product
any goods or service
3.5.21
raw material
primary or secondary material that is used to produce a product (3.5.20)
3.5.22
feedstock energy
heat of combustion of a raw material (3.5.21) input that is not used as an energy source to a product
system (3.5.1), expressed in terms of higher heating value or lower heating value
3.5.23
co-product
product (3.5.20) coming from the same unit process (3.6.16) or product system (3.5.1) as one or more
other products
3.5.24
intermediate product
output from a unit process (3.6.16) within a system that is input to one or more other unit process(es)
within the same system, where it is transformed
3.5.25
final product
product (3.5.20) that requires no additional transformation (3.8.3) prior to its use
3.5.26
packaging
ISO 14050:2020/DAM 1:2022(E)
product (3.5.20) that is used to protect or contain another product during transportation, storage,
marketing or use
3.5.27
consumer
individual member of the general public purchasing or using products (3.5.20) and property for private
purposes
3.5.28
service life
period of time during which a product (3.5.20) in use meets or exceeds the performance (3.1.12)
requirements (3.1.15)
3.5.29
product function characteristic
attribute or characteristic in the performance (3.1.12) and use of a product (3.5.20)
3.5.30
recyclable
characteristic of a product (3.5.20), including packaging (3.5.26) and associated component, that can
be diverted from the waste stream through available processes (3.1.9) and programmes, and can be
collected, processed and returned to use in the form of raw materials (3.5.21)
3.5.31
upgradability
characteristic of a product (3.5.20) that allows its modules or parts to be separately upgraded or
replaced without having to replace the entire product
3.5.32
supply chain
those involved, through upstream and downstream linkages, in activities delivering value in the form
of a product (3.5.20) to different interested parties (3.1.2)
3.5.33
design and development
process (3.1.9) that transforms requirements (3.1.15) into a product (3.5.20)
3.5.34
value chain
entire sequence of activities or parties that create or receive value through the provision of a product
(3.5.20)
3.5.35
ecodesign
ISO 14050:2020/DAM 1:2022(E)
systematic approach that considers environmental aspects (3.2.20) in design and development (3.5.33)
with the aim to reduce adverse environmental impacts (3.2.22) throughout the life cycle (3.6.1) of a
product (3.5.20)
3.5.36
release
emission to air or discharge to water or soil
3.6 Terms relating to life cycle assessment
3.6.1
life cycle
consecutive and interlinked stages of a product system (3.5.1), from raw material (3.5.21) acquisition or
generation from natural resources (3.2.5) to final disposal
3.6.2
life cycle assessment
LCA
compilation and assessment of the inputs, outputs and the potential environmental impacts (3.2.22) of a
product system (3.5.1) throughout its life cycle (3.6.1)
3.6.3
organizational life cycle assessment
OLCA
compilation and evaluation of the inputs, outputs and potential environmental impacts (3.2.22) of the
activities associated with an organization (3.1.1) as a whole or portion thereof adopting a life cycle
(3.6.1) perspective
3.6.4
life cycle impact assessment
LCIA
phase of life cycle assessment (3.6.2) aimed at understanding and evaluating the magnitude and
significance of the potential environmental impacts (3.2.22) for a product system (3.5.1) throughout the
life cycle (3.6.1) of the product (3.5.20)
3.6.5
impact category
〈life cycle assessment〉 class representing environmental issues of concern to which life cycle inventory
analysis results (3.6.11) can be assigned
3.6.6
impact category indicator
〈life cycle assessment〉 quantifiable representation of impact category (3.6.5)
3.6.7
eco-efficiency
ISO 14050:2020/DAM 1:2022(E)
aspect of sustainability relating the environmental performance (3.2.24) of a product system (3.5.1) to its
product system value (3.5.4)
3.6.8
eco-efficiency indicato
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.