Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8

This European Standard applies to scheduling equipment for heating systems. The signals can be processed by using either analogue or digital techniques, or both.
It applies to start-stop scheduling functions and sets minimum acceptable standards for functions, performance and documentation.
NOTE 1   The start-stop function can be integrated within a main control device. In this case, the controller would be expected to this standard for scheduling function.
Safety requirements on heating systems and heating control systems remain unaffected by this European Standard. The actuators and the dynamic behaviour of the valves are not covered in this European Standard. This control equipment may or may not be connected to a data network.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000-1.
NOTE 2   In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 3   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.

Energieeffizienz von Gebäuden - Mess-, Steuer- und Regeleinrichtungen für Heizungen - Teil 5: Schalteinrichtungen zur programmierten Ein- und Ausschaltung von Heizungsanlagen - Module M3-5, 6, 7, 8

Diese Europäische Norm gilt für Zeitschalteinrichtungen für Heizungsanlagen. Die Signale können entweder mit Analog- oder Digitalverfahren oder beiden verarbeitet werden.
Sie gilt für Ein-/Ausschalt-Zeitschaltfunktionen und legt Mindestanforderungen an Funktionen, das Betriebsverhalten und die Dokumentation fest.
ANMERKUNG 1 Die Ein-/Ausschaltfunktion kann in eine Hauptregeleinrichtung integriert sein. Dann wird erwartet, dass der Regler hinsichtlich der Zeitsteuerungsfunktion dieser Norm entspricht.
Sicherheitstechnische Anforderungen für Heizungsanlagen und deren Mess-, Steuer- und Regeleinrichtungen bleiben von dieser Europäischen Norm unberührt. Stellglieder und das dynamische Verhalten von Ventilen werden in dieser Europäischen Norm nicht behandelt. Die Mess-, Steuer- und Regeleinrichtungen können oder können nicht an ein Datennetz angeschlossen sein.
Tabelle 1 zeigt die relative Position dieser Norm innerhalb des EPB-Normenpaketes im Kontext der in EN ISO 52000-1 dargelegten modularen Struktur.
ANMERKUNG 2 In CEN ISO/TR 52000-2 findet sich die gleiche Tabelle mit den Nummern (für jedes Modul) der jeweiligen EPB-Normen und den dazugehörigen technischen Berichten, die bereits veröffentlicht wurden oder sich in der Erstellung befinden.
ANMERKUNG 3 Die Module repräsentieren EPB-Normen, auch wenn eine EPB-Norm mehr als ein Modul abdecken kann und ein Modul von mehr als einer EPB-Norm abgedeckt werden kann, zum Beispiel jeweils ein vereinfachtes und ein detailliertes Verfahren.

Performance énergétique des bâtiments - Régulation pour les systèmes de chauffage - Partie 5 : Programmateurs d'intermittences pour les systèmes de chauffage - Modules M3-5, 6, 7, 8

La présente Norme s’applique aux dispositifs qui commandent la programmation des systèmes de chauffage. Les signaux peuvent être traités par des techniques analogiques et/ou numériques.
Elle s’applique aux fonctions de commande de démarrage-arrêt et définit des niveaux minimaux admissibles pour les fonctions, les performances et la documentation.
NOTE 1   La fonction marche-arrêt peut être intégrée dans un dispositif de régulation centralisé. Dans ce cas, il convient que ce dispositif soit conforme à la présente norme pour ce qui concerne la fonction de programmation.
Les exigences de sécurité relatives aux systèmes de chauffage et aux systèmes de régulation du chauffage ne sont pas affectées par la présente Norme européenne. Les actionneurs et le comportement dynamique des vannes ne sont pas couverts par la présente Norme européenne. Ces dispositifs de régulation peuvent être ou non raccordés à un réseau de transmission de données.
Le tableau 1 présente la position de cette norme dans l’ensemble des normes PEB et dans le contexte de la structure modulaire comme décrit dans prEN ISO 52000-1.
NOTE 2    Le même tableau se trouve dans prEN ISO/TR 52000-2 avec, pour chaque module, le nombre des normes PEB et les rapports qui les accompagnent, publiés ou en préparation.
NOTE 3   Les modules représentent les normes PEB, bien qu’une norme peut recouvrir plus qu’un module et qu’un module peut être recouvert par plus qu’une norme PEB, comme par exemple une méthode simplifiée et une détaillée.

Energijske lastnosti stavb - Naprave za regulacijo sistemov za ogrevanje - 5. del: Regulatorji nastavitve zagona in ustavitve sistemov za ogrevanje - Moduli M3-5, 6, 7, 8

Ta evropski standard se nanaša na opremo, ki nadzira razporejanje ogrevalnih sistemov. Ti signali se lahko obdelajo bodisi z analognimi bodisi z digitalnimi tehnikami ali obojim. Posebna oprema, na katero se nanaša ta dokument, zajema oboje: · samostoječe fiksne razporejevalnike za začetek/ustavitev; · krmilnike, ki vključujejo fiksno funkcijo za začetek/ustavitev. Nanaša se na osnovne in dodane funkcije nadzora začetka/ustavitve in določa minimalne sprejemljive standarde za funkcije, delovanje in dokumentacijo. OPOMBA Funkcija za začetek/ustavitev je lahko vgrajena v glavno nadzorno napravo. V tem primeru je pričakovan krmilnik po tem standardu za funkcijo razporejanja. Ta evropski standard ne vpliva na varnostne zahteve za sisteme ogrevanja in sisteme nadzora ogrevanja. Sprožilniki in dinamično vedenje ventilov v tem evropskem standardu niso obravnavani. Ta nadzorna oprema je lahko povezana s podatkovnim omrežjem ali pa ne.

General Information

Status
Withdrawn
Publication Date
16-May-2017
Withdrawal Date
29-Nov-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
30-Nov-2022

Relations

Buy Standard

Standard
EN 12098-5:2018
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12098-5:2016
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Energijske lastnosti stavb - Naprave za regulacijo sistemov za ogrevanje - 5. del: Regulatorji nastavitve zagona in ustavitve sistemov za ogrevanje - Moduli M3-5, 6, 7, 8Energieeffizienz von Gebäuden - Mess-, Steuer- und Regeleinrichtungen für Heizungen - Teil 5: Schalteinrichtungen zur programmierten Ein- und Ausschaltung von Heizungsanlagen - Module M3-5, 6, 7, 8Performance énergétique des bâtiments - Régulation pour les systèmes de chauffage - Partie 5 : Programmateurs d'intermittences pour les systèmes de chauffage - Modules M3-5, 6, 7, 8Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,897.120Avtomatske krmilne naprave za domAutomatic controls for household use91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 12098-5:2017SIST EN 12098-5:2018en,fr,de01-maj-2018SIST EN 12098-5:2018SLOVENSKI
STANDARDSIST EN 12098-5:20061DGRPHãþD



SIST EN 12098-5:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12098-5
May
t r s y ICS
{ sä s v rä s râ
{ yä s t r Supersedes EN
s t r { zæ wã t r r wEnglish Version
Energy Performance of Buildings æ Controls for heating systems æ Part
wã Startæstop schedulers for heating systems æ Modules M uæ wá xá yá z Performance énergétique des bâtiments æ Régulation pour les systèmes de chauffage æ Partie
w ã Programmateurs d 5intermittences pour les systèmes de chauffage æ Modules M uæ wá


z
Energetische Bewertung von Gebäuden æ Messæá Steueræund Regeleinrichtungen für Heizungen æ Teil
wã Schalteinrichtungen zur programmierten Einæ und Ausschaltung von Heizungsanlagen æ Module M uæ wá


z This European Standard was approved by CEN on
t y February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t r { zæ wã t r s y ESIST EN 12098-5:2018



EN 12098-5:2017 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 8 3 Terms and definitions . 8 4 Symbols, subscripts and abbreviations. 11 4.1 Symbols . 11 4.2 Subscripts . 11 5 Functionality . 11 6 Requirements . 13 6.1 Data protection . 13 6.2 Scheduler operating modes .
...

SLOVENSKI STANDARD
oSIST prEN 12098-5:2016
01-januar-2016
Regulacijske naprave za sisteme ogrevanja - 5. del: Nastavljalniki za zagon in
ustavitev sistemov ogrevanja - Moduli M3-5, 6, 7, 8
Controls for heating systems - Part 5: Start-stop schedulers for heating systems -
Modules M3-5,6,7,8
Mess-, Steuer- und Regeleinrichtungen für Heizungen - Teil 5: Schalteinrichtungen zur
programmierten Ein- und Ausschaltung von Heizungsanlagen - Module M3-5, 6, 7, 8
Régulation pour les systèmes de chauffage - Partie 5 : Programmateurs d'intermittences
pour les systèmes de chauffage - Modules M3-5, 6, 7, 8
Ta slovenski standard je istoveten z: prEN 12098-5
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
oSIST prEN 12098-5:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12098-5:2016

---------------------- Page: 2 ----------------------
oSIST prEN 12098-5:2016


DRAFT
EUROPEAN STANDARD
prEN 12098-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2015
ICS 91.140.10; 97.120 Will supersede EN 12098-5:2005
English Version

Controls for heating systems - Part 5: Start-stop schedulers
for heating systems - Modules M3-5,6,7,8
Régulation pour les systèmes de chauffage - Partie 5 : Mess-, Steuer- und Regeleinrichtungen für Heizungen -
Programmateurs d'intermittences pour les systèmes Teil 5: Schalteinrichtungen zur programmierten Ein-
de chauffage - Modules M3-5, 6, 7, 8 und Ausschaltung von Heizungsanlagen - Module M3-5,
6, 7, 8
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 247.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12098-5:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12098-5:2016
prEN 12098-5:2015 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 10
4.1 Symbols . 10
4.2 Subscripts . 10
5 Functionality .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.