EN 10164:1993

Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

This European Standard specifies through thickness properties and associated test methods for steel plates, strip, wide flats and sections.  This European Standard may be applied as a supplement to all product standards for plate, strip, wide flats and sections of killed steels, except stainless steels. It covers products having a thickness between 15 mm and 250 mm inclusive of steels with a specified minimum upper yield strenght ReH or proof strenght RpO,2 ¿ 500 N/mm2 for which improved through thickness properties are required.  The application of this European Standard to other product thicknesses and other steel types shall be the subject of agreement at the time of the enquiry and order. Option 1.

Stahlerzeugnisse mit verbesserten Verformungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische Lieferbedingungen

Diese europäische Norm enthält Anforderungen an die Eigenschaften senkrecht zur Erzeugnisoberfläche von Blech, Band, Breitflachstahl und Profilen aus Stahl sowie die entsprechenden Prüfverfahren. Diese europäische Norm kann als Ergänzung zu allen Erzeugnisnormen für Blech, Band, Breitflachstahl und Profile aus beruhigten Stählen mit Ausnahme der nichtrostenden Stähle angewendet werden.

Aciers de construction à caractéristiques de déformation améliorées dans le sens perpendiculaire à la surface du produit - Conditions techniques de livraison

La présente norme européenne prescrit les caractéristiques dans le sens de l'épaisseur et les méthodes d'essai correspondantes pour les tôles, bandes, larges-plats et rpofilés en acier. La présente norme européenne peut être utilisée comme complément de toutes les norme de qualité relatives aux tôles, bandes, larges-plats et profilés en aciers calmés, à l'exclusion des acier inoxydables.

Jekleni izdelki z izboljšanimi sposobnostmi deformacije pravokotno na površino - Tehnični dobavni pogoji

General Information

• Status: Withdrawn
• Publication Date: 23-Jun-1993
• Withdrawal Date: 07-Dec-2004
• ICS: 77.140.70 - Steel profiles
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10 - Structural steels - Qualities
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Dec-2004
• Completion Date: 08-Dec-2004
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/10 - ECISS - 3rd programme
• Ref Project: SIST EN 10164:1998 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

Relations

• Replaced By: EN 10164:2004 - Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlerzeugnisse mit verbesserten Verformungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische LieferbedingungenAciers de construction a caractéristiques de déformation améliorées dans le sens perpendiculaire a la surface du produit - Conditions techniques de livraisonSteel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions77.140.01Železni in
...