Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2019)

This document specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and decommissioning of offshore structures related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditions, persistent snow cover, and/or permafrost.
The objective of this document is to ensure that complete structures, including substructures, topsides structures, floating production vessel hulls, foundations and mooring systems, in arctic and cold regions provide an appropriate level of reliability with respect to personnel safety, environmental protection and asset value. Value includes value to the owner, to the industry and to society in general.
This document does not contain requirements for the operation, maintenance, service-life inspection or repair of arctic and cold region offshore structures, unless the design strategy imposes specific requirements such as ice management (IM) to reduce ice actions.
Provisions for the operation, maintenance, service‐life inspection and repair of mobile units are given in ISO 19905-1 and ISO 19905-3, supplemented by the provisions relating to ice actions and IM in this document.
This document does not apply to mechanical, process and electrical equipment or any specialized process equipment associated with arctic and cold region offshore operations except in so far as it is necessary for the structure to sustain safely the actions imposed by the installation, housing and operation of such equipment. This document applies to equipment used for the positioning and disconnection of floating structures (see Clause 13).

Erdöl- und Erdgasindustrie - Offshore-Bauwerke für den Arktis-Bereich (ISO 19906:2019)

Industries du pétrole et du gaz naturel - Structures arctiques en mer (ISO 19906:2019)

Industrija nafte in zemeljskega plina - Naftne ploščadi za arktična območja (ISO 19906:2019)

Ta dokument določa zahteve ter podaja priporočila in smernice glede načrtovanja, transporta, namestitve in izločitve iz uporabe za naftne ploščadi v zvezi z dejavnostmi naftne industrije in industrije zemeljskega plina v arktičnih in hladnih območjih. Sklic na arktična in hladna območja v tem dokumentu vključuje Arktiko in druge lokacije, katerih značilnost so nizke temperature okolice ter prisotnost ali možnost nastanka ledu, ledenih gora, zaledenitve, trajne snežne odeje in/ali permafrosta. Cilj tega dokumenta je zagotoviti, da celotne strukture, vključno s podstrukturami, strukturami na palubi, plavajočimi proizvodnimi plovili, temelji in sistemi zasidranja, v arktičnih in hladnih območjih zagotavljajo ustrezno raven zanesljivosti v zvezi z osebno varnostjo, varstvom okolja in vrednostjo premoženja. Vrednost vključuje vrednost za lastnika, industrijo in družbo na splošno. Ta dokument ne vključuje zahtev za obratovanje, vzdrževanje, preglede in popravila med obratovanjem naftnih ploščadi v arktičnih in hladnih območjih, če strategija zasnove ne nalaga posebnih zahtev, kot je ravnanje v primeru ledu (IM) za zmanjšanje vplivov ledu. Določila glede obratovanja, vzdrževanja, pregledov in popravil med obratovanjem mobilnih enot so podana v standardih ISO 19905-1 in ISO 19905-3, dopolnjujejo pa jih določila v zvezi z vplivi ledu in ravnanjem v primeru ledu v tem dokumentu. Ta dokument se ne uporablja za mehansko, procesno in električno opremo ali nobeno specializirano procesno opremo, povezano z obratovanjem ploščadi v arktičnih in hladnih območjih, razen kolikor je to potrebno, da struktura varno vzdrži vse vplive zaradi namestitve, ohišja in obratovanja takšne opreme. Ta dokument se uporablja za opremo za pozicioniranje in odklop plavajočih struktur (glej točko 13).

General Information

Status
Published
Publication Date
27-Aug-2019
Withdrawal Date
28-Feb-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
28-Aug-2019
Completion Date
28-Aug-2019

Relations

Buy Standard

Standard
EN ISO 19906:2019
English language
561 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19906:2017
English language
520 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19906:2019
01-november-2019
Nadomešča:
SIST EN ISO 19906:2012
Industrija nafte in zemeljskega plina - Naftne ploščadi za arktična območja (ISO
19906:2019)
Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2019)
Erdöl- und Erdgasindustrie - Offshore-Bauwerke für den Arktis-Bereich (ISO 19906:2019)
Industries du pétrole et du gaz naturel - Structures arctiques en mer (ISO 19906:2019)
Ta slovenski standard je istoveten z: EN ISO 19906:2019
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
SIST EN ISO 19906:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19906:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 19906:2019


EN ISO 19906
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2019
EUROPÄISCHE NORM
ICS 75.180.10 Supersedes EN ISO 19906:2010
English Version

Petroleum and natural gas industries - Arctic offshore
structures (ISO 19906:2019)
Industries du pétrole et du gaz naturel - Structures Erdöl- und Erdgasindustrie - Offshore-Bauwerke für
arctiques en mer (ISO 19906:2019) den Arktis-Bereich (ISO 19906:2019)
This European Standard was approved by CEN on 21 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19906:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19906:2019
EN ISO 19906:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19906:2019
EN ISO 19906:2019 (E)
European foreword
This document (EN ISO 19906:2019) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards
shall be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19906:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19906:2019 has been approved by CEN as EN ISO 19906:2019 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 19906:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 19906:2019
INTERNATIONAL ISO
STANDARD 19906
Second edition
2019-07
Petroleum and natural
...

SLOVENSKI STANDARD
oSIST prEN ISO 19906:2017
01-november-2017
,QGXVWULMDQDIWHLQ]HPHOMVNHJDSOLQD1DIWQHSORãþDGL]DDUNWLþQDREPRþMD
,62',6
Petroleum and natural gas industries - Arctic offshore structures (ISO/DIS 19906:2017)
Erdöl- und Erdgasindustrie - Offshore-Bauwerke für den Arktis-Bereich (ISO/DIS
19906:2017)
Industries du pétrole et du gaz naturel - Structures arctiques en mer (ISO/DIS 19906)
Ta slovenski standard je istoveten z: prEN ISO 19906
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
oSIST prEN ISO 19906:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19906:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19906:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19906
ISO/TC 67/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2017-08-29 2017-11-20
Petroleum and natural gas industries — Arctic offshore
structures
Industries du pétrole et du gaz naturel — Structures arctiques en mer
ICS: 75.180.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19906:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19906:2017
ISO/DIS 19906:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19906:2017
ISO/DIS 19906
Contents      page
Foreword . vii
Introduction.ix
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 11
4 Symbols and abbreviated terms . 18
4.1 Symbols . 18
4.2 Abbreviated terms . 18
5 General requirements and conditions . 20
5.1 Fundamental requirements . 20
5.2 Design methods . 20
5.3 Site-specific considerations. 21
5.4 Construction, transportation and installation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.