EN 13658-2:2005

Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering

This European Standard specifies the requirements and test methods of metal lath and beads for external render-ing.
This European Standard covers metal lath intended to be used for fixing to structures or solid backgrounds to pro-vide a key to hold the plaster in position. Used in this way it enables fire protecting plastering systems to be pro-vided.
This European Standard covers metal beads intended to be used to improve the protection of external angles and also provide features to the external finish of the construction and which can also be used as movement or expan-sion beads. They also contribute to fire protection.

Putzträger und Putzprofile aus Metall - Begriffe, Anforderungen und Prüfverfahren - Teil 2: Außenputze

Dieses Dokument legt die Anforderungen an Putzträger und Putzprofile aus Metall für Außenputze und die entsprechenden Prüfverfahren fest.
Dieses Dokument gilt für Putzträger aus Metall, die an Unterkonstruktionen oder festen Untergründen befestigt werden, um einen Putzgrund zu schaffen, der die Haftung des Putzes sicherstellt. Werden sie auf diese Weise verwendet, so ermöglichen sie Putzsysteme, die für den Brandschutz wirksam sind.
Dieses Dokument gilt für Putzprofile aus Metall, die zur Erhöhung des Schutzes  äußeren Ecken und als dekorative Putzanschlüsse und Putzabschlüsse verwendet werden, sowie für Putzprofile die als Bewegungsfugen- oder Dehnungsfugenprofile verwendet werden. Putzprofile aus Metall tragen auch zum Brandschutz bei.

Lattis et cornières métalliques - Définitions, exigences et méthodes d'essai - Partie 2: Enduits extérieurs

La présente Norme européenne définit les exigences et les méthodes d�essai applicables aux lattis et aux
cornières métalliques destinés à l�application d�enduits extérieurs.
La présente norme traite des lattis métalliques destinés à permettre la fixation à des structures ou à des
supports massifs, afin de fournir un support d�accrochage de l�enduit. Le lattis permet, dans ce type
d�utilisation, la mise en place de systèmes d�enduits de protection contre l�incendie.
La présente Norme européenne traite des cornières métalliques destinées à être utilisées pour améliorer la
protection des angles extérieurs et à obtenir les caractéristiques des finitions extérieures de la construction
ainsi que les cornières métalliques destinées à être utilisées en tant que cornières de mouvement ou
d�expansion. Les cornières contribuent également à la protection contre l�incendie.

Kovinski profili – Definicije, zahteve in preskusne metode – 2. del: Zunanji omet

General Information

• Status: Published
• Publication Date: 17-May-2005
• Withdrawal Date: 27-Feb-2007
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 241 - Gypsum and gypsum based products
• Drafting Committee: CEN/TC 241/WG 1 - Powders
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-May-2005
• Completion Date: 18-May-2005
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/106 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on gypsum products
• Ref Project: SIST EN 13658-2:2005 - Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering

Relations

• Revised: FprEN 13658-2 - Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
• Effective Date: 03-Aug-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metal lath and beads - Definitions, requirements and test methods - Part 2: External renderingKovinski profili – Definicije, zahteve in preskusne metode – 2. del: Zunanji ometLattis et cornieres métalliques - Définitions, exigences et méthodes d'essai - Partie 2: Enduits extérieursPutzträger und Putzprofile aus Metall - Begriffe, Anforderungen und Prüfverfahren - Teil 2: AußenputzeTa slovenski standard je istoveten z:EN 13658-2:2005SIST EN 13658-2:2005en91.100.1077.140.65ICS:SLOVENSKI
STANDARDSIST EN 13658-2:200501-julij-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13658-2May 2005ICS 77.140.65; 91.100.10English versionMetal lath and beads - Definitions, requirements and testmethods - Part 2: External renderingLattis et cornières métalliques - Définitions, exigences etméthodes d' essai - Partie 2 : Enduits extérieursPutzträger und Putzprofile aus Metall - Begriffe,Anforderungen und Prüfverfahren - Teil 2: AußenputzeThis European Standard was approved by CEN on 24 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13658-2:2005: E

Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.31 ZA.1 Scope and relevant characteristics.31 ZA.2 Procedure(s) for the attestation of conformity of metal lath and beads.32 ZA.3 CE marking and labelling.33 Bibliography.36

Raw gypsum
A1 – Gypsum binders for direct use or further processing
A2 – Direct use on site
A3 – Further processing
Gypsum plasters: B1 – Gypsum building plaster B2 – Gypsum based building plaster B3 – Gypsum-lime building plaster B4 – Lightweight gypsum building plasterB5 – Lightweight gypsum based building plaster B6 – Lightweight gypsum-lime building plaster
B7 – Gypsum plaster with enhanced surface hardness
Gypsum plasters for special purposes: C1 – Gypsum plaster for
fibrous plasterworksC2 – Gypsumbricklaying
plaster C3 – Acoustic plaster C4 – Thermal insulating plaster C5 – Fire protection plaster C6 – Thin coat plaster
Manufactured elements, e. g.:  gypsum blocks  fibrous plaster casts  ceiling tiles  plasterboards  gypsum boards with fibrous rein-forcement  metal lath and beads Diagram 1  Family of Gypsum products
...