EN 13658-1:2005

Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering

This European Standard specifies the requirements and test methods of metal lath and beads for internal plaster-ing.
This European Standard covers metal lath intended to be used for fixing to structures or solid backgrounds to pro-vide a key to hold the plaster in position. Metal lath is used vertically to support linings for walls, partitions and col-umns and horizontally to support linings for ceilings and beams. Used in this way it enables fire protecting plaster-ing systems to be provided.
This European Standard covers metal beads intended to be used to improve the protection of corners and also provide features to the internal finish of the construction as well as metal beads intended to be used as depth gauge beads and movement or expansion beads. They also contribute to fire protection.

Putzträger und Putzprofile aus Metall - Begriffe, Anforderungen und Prüfverfahren - Teil 1: Innenputze

Dieses Dokument legt die Anforderungen an Putzträger und Putzprofile aus Metall für Innenputze und die entsprechenden Prüfverfahren fest.
Dieses Dokument gilt für Putzträger aus Metall, die an Unterkonstruktionen oder festen Untergründen befestigt werden, um einen Putzgrund zu schaffen, der die Haftung des Putzes sicherstellt. Putzträger aus Metall werden vertikal als Putzuntergrund für Wände, Trennwände und Stützen und horizontal als Putzuntergrund für Decken und Balken verwendet. Auf diese Art verwendet, ermöglichen sie die Herstellung von Brandschutz-Putzsystemen.
Dieses Dokument gilt auch für Putzprofile aus Metall, die zur Verbesserung des Eckenschutzes und als dekorative Putzanschlüsse und Putzabschlüsse verwendet werden, sowie für Putzprofile, die als Schnellputzleisten und Bewegungs- oder Dehnungsfugenprofile verwendet werden. Putzprofile aus Metall tragen auch zum Brandschutz bei.

Lattis et cornières métalliques - Définitions, exigences et méthodes d'essai - Partie 1: Enduits intérieurs

La présente norme européenne définit les exigences et les méthodes d�essai applicables aux lattis et aux cornières
métalliques destinés à l�application d�enduits intérieurs.
La présente norme s�appliquent aux lattis métalliques destinés à permettre la fixation à des structures ou à des
supports solides, afin de fournir un support d�accrochage de l�enduit. Le lattis s�emploie verticalement comme
support d�enduit des revêtements de murs, de cloisons et de colonnes, et horizontalement comme support d�enduit
des revêtements de plafonds et de poutres. Le lattis permet, dans ce type d�utilisation, la mise en place de
systèmes d�enduits de protection contre l�incendie.
La présente Norme européenne concerne les cornières métalliques destinées à être utilisées pour améliorer la
protection des angles et obtenir les caractéristiques des finitions intérieures de la construction ainsi que les
cornières métalliques destinées à être utilisées en tant qu�indicateurs d�épaisseur, cornières de mouvement ou
d�expansion. Les cornières contribuent également à la protection contre l�incendie.

Kovinski profili - Definicije, zahteve in preskusne metode – 1. del: Notranji omet

General Information

• Status: Published
• Publication Date: 17-May-2005
• Withdrawal Date: 27-Feb-2007
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 241 - Gypsum and gypsum based products
• Drafting Committee: CEN/TC 241/WG 1 - Powders
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-May-2005
• Completion Date: 18-May-2005
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/106 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on gypsum products
• Ref Project: SIST EN 13658-1:2005 - Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering

Relations

• Revised: FprEN 13658-1 - Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plasteringKovinski profili - Definicije, zahteve in preskusne metode – 1. del: Notranji ometLattis et cornieres métalliques - Définitions, exigences et méthodes d'essai - Partie 1: Enduits intérieursPutzträger und Putzprofile aus Metall - Begriffe, Anforderungen und Prüfverfahren - Teil 1: InnenputzeTa slovenski standard je istoveten z:EN 13658-1:2005SIST EN 13658-1:2005en91.100.1077.140.65ICS:SLOVENSKI
STANDARDSIST EN 13658-1:200501-julij-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13658-1May 2005ICS 77.140.65; 91.100.10English versionMetal lath and beads - Definitions, requirements and testmethods - Part 1: Internal plasteringLattis et cornières métalliques - Définitions, prescriptions etméthodes d'essai - Partie 1 : Enduits intérieursPutzträger und Putzprofile aus Metall - Begriffe,Anforderungen und Prüfverfahren - Teil 1: InnenputzeThis European Standard was approved by CEN on 24 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13658-1:2005: E

Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.31 ZA.1 Scope and relevant characteristics.31 ZA.2 Procedure(s) for the attestation of conformity of metal lath and beads.32 ZA.3 CE marking and labelling.33

Raw gypsum
A1 – Gypsum binders for direct use or further processing
A2 – Direct use on site
A3 – Further processing
Gypsum plasters: B1 – Gypsum building plaster B2 – Gypsum based building plaster B3 – Gypsum-lime building plaster B4 – Lightweight gypsum building plasterB5 – Lightweight gypsum based building plaster B6 – Lightweight gypsum-lime building plaster
B7 – Gypsum plaster with enhanced surface hardness
Gypsum plasters for special purposes: C1 – Gypsum plaster for
fibrous plasterworksC2 – Gypsum bricklaying
plaster C3 – Acoustic plaster C4 – Thermal insulating plaster C5 – Fire protection plaster C6 – Thin coat plaster
Manufactured elements, e. g.:  gypsum blocks  fibrous plaster casts  ceiling tiles  plasterboards  gypsum boards with fibrous rein-forcement  metal lath and beads
Diagram 1  Family of gypsum products
...