EN 1372:2015
(Main)Adhesives - Test method for adhesives for floor and wall coverings - Peel test
Adhesives - Test method for adhesives for floor and wall coverings - Peel test
This European Standard specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under peel forces. The term “wall covering” does not include any type of wallpaper.
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Schälversuch
Diese Europäische Norm legt ein Prüfverfahren für die Messung der Haftung eines mit einem vorgegebenen Substrat geklebten flexiblen oder textilen Boden oder Wandbelags unter der Einwirkung von Schälkräften fest. Die Benennung „Wandbelag“ umfasst keine Art von Papier-Wandtapeten.
Adhésifs - Méthodes d'essais d'adhésifs pour revêtements de sol et muraux - Essai de pelage
La présente Norme européenne spécifie une méthode d'essai pour mesurer l'adhésion d'un revêtement de sol ou d'un revêtement mural, textile ou résilient, collé sur un support donné et soumis à des forces de pelage. Le terme « revêtement mural » n’inclut aucun type de papier peint.
Lepila - Preskusna metoda za lepila za talne in stenske obloge - Preskus luščenja
General Information
- Status
- Withdrawn
- Publication Date
- 21-Apr-2015
- Withdrawal Date
- 13-Apr-2025
- Technical Committee
- CEN/TC 193 - Adhesives
- Drafting Committee
- CEN/TC 193/WG 4 - Building adhesives
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Jul-2019
- Completion Date
- 14-Apr-2025
Relations
- Replaces
EN 1372:1999 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test - Effective Date
- 29-Apr-2015
- Effective Date
- 13-Nov-2017
Frequently Asked Questions
EN 1372:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Adhesives - Test method for adhesives for floor and wall coverings - Peel test". This standard covers: This European Standard specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under peel forces. The term “wall covering” does not include any type of wallpaper.
This European Standard specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under peel forces. The term “wall covering” does not include any type of wallpaper.
EN 1372:2015 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1372:2015 has the following relationships with other standards: It is inter standard links to EN 1372:1999, EN ISO 22631:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 1372:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - SchälversuchAdhésifs - Méthodes d'essai d'adhésifs pour revêtements du sol et muraux - Essai de pelageAdhesives - Test method for adhesives for floor and wall coverings - Peel test83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1372:2015SIST EN 1372:2015en,fr,de01-julij-2015SIST EN 1372:2015SLOVENSKI
STANDARDSIST EN 1372:20001DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1372
April 2015 ICS 83.180 Supersedes EN 1372:1999English Version
Adhesives - Test method for adhesives for floor and wall coverings - Peel test
Adhésifs - Méthodes d'essais d'adhésifs pour revêtements de sol et muraux - Essai de pelage
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Schälversuch This European Standard was approved by CEN on 16 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1372:2015 ESIST EN 1372:2015
...
SIST EN 1372:2015는 바닥 및 벽 장식용 접착제의 표준화된 시험 방법을 제공합니다. 이 문서는 접착제의 부착력을 평가하기 위해 고안된 실제적이고 과학적인 접근 방식을 제시하며, 특히 탄력적이거나 섬유질 바닥재 또는 벽재가 특정 기재에 접착된 상태에서 박리 힘에 대한 저항력을 측정하는 시험 방법을 구체화합니다. 이 표준의 강점 중 하나는 다양한 기재와 접착제 조합에 대한 테스트 가능성을 제공하여, 접착력의 일관성과 신뢰성을 보장하는 데 기여한다는 점입니다. 또한 "벽 장식"의 정의에 명확하게 제한을 두어, 벽지와 같은 비엽재를 제외함으로써 시험의 적용 범위를 명확히 하고 있습니다. 이는 관련 산업 종사자들이 특정 제품의 적합성을 제대로 평가할 수 있도록 돕습니다. SIST EN 1372:2015의 적용 범위는 바닥 및 벽 장식용 접착제 테스트에 있어 중요하며, 이 표준에 따라 수행되는 시험은 제품의 성능을 객관적으로 비교하고 지속 가능성을 평가하는 데 필수적인 기준이 됩니다. 따라서, 이 문서는 건축 및 인테리어 산업에서 접착제의 품질 보증을 위한 중요한 도구로 자리잡고 있으며, 관련 제품들이 요구되는 기준을 충족하도록 지원합니다.
The EN 1372:2015 standard serves as a critical benchmark in the adhesives industry, specifically focusing on the testing methods for adhesives used in resilient or textile floor coverings and wall coverings. This European Standard is essential for manufacturers, as it delineates a clear protocol for assessing the adhesion strength of these products when subjected to peel forces. One of the primary strengths of EN 1372:2015 lies in its systematic approach to measuring adhesive performance. By providing a standardized test method, the document ensures consistency and reliability in results, which is crucial for manufacturers seeking to understand and improve their product formulations. This adherence to a uniform test procedure not only enhances product quality but also builds consumer trust in the performance of floor and wall coverings. The relevance of this standard in today’s market cannot be overstated. With a growing emphasis on quality assurance and compliance in construction and renovation projects, EN 1372:2015 plays a fundamental role in guiding manufacturers to produce adhesives that meet both industry standards and customer expectations. Furthermore, it supports the broader objectives of sustainability and durability in flooring and wall covering applications, which resonate with current trends prioritizing long-lasting and eco-friendly products. Moreover, the standard’s definition of “wall covering” distinctly excludes wallpaper, emphasizing its focus on resilient and textile materials. This specificity ensures that the testing methods are appropriately tailored to relevant product types, thus enhancing the clarity of application for stakeholders involved in manufacturing and quality control. Overall, SIST EN 1372:2015 establishes a framework that not only hones in on the testing requirements for adhesives used in floor and wall coverings but also underscores its critical role in the quality assurance landscape, ultimately contributing to the superior performance of adhesive products in real-world applications.
SIST EN 1372:2015は、床および壁のカバーリング用接着剤の試験方法を定めた重要な文書です。この標準は、特に弾性または繊維製の床カバーおよび壁カバーが特定の基材に対して剥離力の下でどの程度接着しているかを測定するための試験方法を示しています。この剥離試験は、接着剤の性能評価において不可欠な要素であり、建築分野における品質管理を支えるものです。 この標準の強みは、その汎用性と明確さにあります。具体的には、床カバーリングおよび壁カバーリングに特化した試験方法を提供することにより、異なる接着剤の比較評価を容易にします。また、「壁カバー」とは壁紙の一種を含まないという定義により、機能面での混乱を避け、適切な使用条件を明示しています。 EN 1372:2015は、業界における信頼性の高い標準として確立されており、企業が自社製品の品質を保証するために他の試験と組み合わせて使用することができます。この標準の適用は、製品の耐久性や信頼性を向上させる手助けとなり、最終的には顧客満足を促進する要因となります。したがって、この文書は接着剤の性能試験において非常に関連性の高いリファレンスとなっています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...