EN 15711:2009
(Main)Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
This European Standard specifies the quality requirements for glass lined flanged steel pipes and flanged
steel fittings.
Emails und Emaillierungen - Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung - Qualitätsanforderungen
Diese Europäische Norm legt die Qualitätsanforderungen für Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung nach DIN 2873 fest. Sie ist sinngemäß auch anwendbar auf Bauteile, die nicht in DIN 2873 aufgeführt sind.
Emaux vitrifiés - Tubes et raccords avec brides en acier revêtus d'émail vitrifiés - Exigences de qualité
La présente Norme européenne spécifie les exigences de qualité relatives aux tubes et raccords avec brides
en acier revêtus démail vitrifié.
Steklasti in keramični emajli - Postekljene jeklene prirobnične cevi in spojniki - Zahteve za kakovost
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Emails und Emaillierungen - Flansch-Rohre und Flansch- Formstücke aus Stahl mit Emaillierung - QualitätsanforderungenEmaux vitrifiés - Tubes et raccords avec brides en acier vitrifié - Exigences de qualitéVitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements25.220.50Emajlne prevlekeEnamelsICS:Ta slovenski standard je istoveten z:EN 15711:2009SIST EN 15711:2009en,fr01-julij-2009SIST EN 15711:2009SLOVENSKI
STANDARD
SIST EN 15711:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15711May 2009ICS 25.220.50 English VersionVitreous and porcelain enamels - Glass lined flanged steel pipesand flanged steel fittings - Quality requirementsEmaux vitrifiés - Tubes et raccords avec brides en acierrevêtus d'émail vitrifiés - Exigences de qualitéEmails und Emaillierungen - Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung -QualitätsanforderungenThis European Standard was approved by CEN on 23 April 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15711:2009: ESIST EN 15711:2009
EN 15711:2009 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Materials for steel parts .44 Ordering details .55 Requirements .55.1 Requirements for the steel parts .55.2 Requirements for the glass lined components .66 Tests and certificates .76.1 General .76.2 Place of testing .76.3 Testing of the substrate .76.4 Testing of the glass lined components .77 Marking .7 SIST EN 15711:2009
EN 15711:2009 (E) 3 Foreword This document (EN 15711:2009) has been prepared by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2009, and conflicting national standards shall be withdrawn at the latest by November
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.