Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)

ISO7963:2005 specifies the dimensions, material, manufacture and methods of use for calibration block No. 2 for calibrating and checking ultrasonic testing equipment

Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Kalibrierkörpers Nr 2 (ISO 7963:2006)

Diese Internationale Norm legt die Abmessungen, Werkstoffe, Herstellung und Verfahren zur Verwendung des Kalibrierkörpers Nr 2 zur Kalibrierung und Überprüfung von Ultraschallprüfgeräten fest.

Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage n° 2 (ISO 7963:2006)

L'ISO7963:2006 spécifie les dimensions, le matériau, la fabrication et les méthodes d'utilisation du bloc d'étalonnage n° 2 pour l'étalonnage et la vérification de l'appareillage de contrôle par ultrasons.

Neporušitveno preskušanje - Ultrazvočno preskušanje - Specifikacije za umeritveni vzorec št. 2 (ISO 7963:2006)

Ta mednarodni standard določa dimenzije, materiale, proizvodnjo in metode uporabe umeritvenega vzorca št. 2 za umeritev in preverjanje ultrazvočne opreme za preskušanje.

General Information

Status
Published
Publication Date
14-Sep-2010
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
15-Sep-2010
Completion Date
15-Sep-2010

RELATIONS

Buy Standard

Standard
EN ISO 7963:2011
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
FprEN ISO 7963:2010
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 7963:2011
01-februar-2011
1DGRPHãþD
SIST EN 27963:1996
1HSRUXãLWYHQRSUHVNXãDQMH8OWUD]YRþQRSUHVNXãDQMH6SHFLILNDFLMH]D
XPHULWYHQLY]RUHFãW ,62

Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO

7963:2006)

Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Kalibrierkörpers Nr 2

(ISO 7963:2006)

Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc

d'étalonnage n° 2 (ISO 7963:2006)
Ta slovenski standard je istoveten z: EN ISO 7963:2010
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 7963:2011 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7963:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 7963:2011
EUROPEAN STANDARD
EN ISO 7963
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2010
ICS 25.160.40 Supersedes EN 27963:1992
English Version
Non-destructive testing - Ultrasonic testing - Specification for
calibration block No. 2 (ISO 7963:2006)

Essais non destructifs - Contrôle par ultrasons - Zerstörungsfreie Prüfung - Ultraschallprüfung -

Spécifications relatives au bloc d'étalonnage n° 2 (ISO Beschreibung des Kalibrierkörpers Nr 2 (ISO 7963:2006)

7963:2006)
This European Standard was approved by CEN on 26 August 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7963:2010: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7963:2011
EN ISO 7963:2010 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 7963:2011
EN ISO 7963:2010 (E)
Foreword

The text of ISO 7963:2006 has been prepared by Technical Committee ISO/TC 135 “Non-destructive testing”

of the International Organization for Standardization (ISO) and has been taken over as EN ISO 7963:2010 by

Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at

the latest by March 2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 27963:1992.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO 7963:2006 has been approved by CEN as a EN ISO 7963:2010 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 7963:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 7963:2011
INTERNATIONAL ISO
STANDARD 7963
Second edition
2006-09-15
Non-destructive testing — Ultrasonic
testing — Specification for calibration
block No. 2
Essais non destructifs — Contrôle par ultrasons — Spécifications
relatives au bloc d'étalonnage n° 2
Reference number
ISO 7963:2006(E)
ISO 2006
---------------------- Page: 7 ----------------------
SIST EN ISO 7963:2011
ISO 7963:2006(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2006

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7963:2011
ISO 7963:2006(E)
Contents Page

Foreword............................................................................................................................................................ iv

Introduction ........................................................................................................................................................ v

1 Scope ..................................................................................................................................................... 1

2 Normative references ........................................................................................................................... 1

3 Terms and definitions........................................................................................................................... 1

4 Dimensions............................................................................................................................................ 1

5 Material .................................................................................................................................................. 1

6 Preparation ............................................................................................................................................ 3

7 Marking .................................................................................................................................................. 3

8 Method of use........................................................................................................................................ 3

8.1 Setting of the time base ....................................................................................................................... 3

8.2 Sensitivity setting and probe checking.............................................................................................. 5

9 Certificate .............................................................................................................................................. 7

Annex A (normative) Calibration block characteristics and use .................................................................. 8

Bibliography ....................................................................................................................................................... 9

© ISO 2006 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7963:2011
ISO 7963:2006(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

ISO 7963 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee

SC 5, Testing and inspection of welds.

This second edition cancels and replaces the first edition (ISO 7963:1985), which has been technically revised.

iv © ISO 2006 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 7963:2011
ISO 7963:2006(E)
Introduction

Calibration block No. 2 differs in size and shape from that described in ISO 2400.

Calibration block No. 2 is very much smaller and lighter, and its geometry is much simpler.

Calibration block No. 2 does not offer as much scope as the larger block; in particular it is not meant to check

an ultrasonic flaw detector completely.
However, calibration block No. 2 makes it possible, duri
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung - Ultraschallprüfung - Beschreibung des Kalibrierkörpers Nr 2 (ISO 7963:2006)Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage n° 2 (ISO 7963:2006)Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:FprEN ISO 7963kSIST FprEN ISO 7963:2010en,fr,de01-julij-2010kSIST FprEN ISO 7963:2010SLOVENSKI

STANDARD
kSIST FprEN ISO 7963:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 7963
February 2010 ICS 25.160.40 Will supersede EN 27963:1992English Version

Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)

Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage n° 2 (ISO 7963:2006)

Zerstörungsfreie Prüfung - Ultraschallprüfung - Festlegungen für den Kalibrierkörper Nr. 2 (ISO 7963:2006)This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 138.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 7963:2010: EkSIST FprEN ISO 7963:2010

FprEN ISO 7963:2010 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 kSIST FprEN ISO 7963:2010

FprEN ISO 7963:2010 (E) 3 Foreword The text of ISO 7963:2006 has been prepared by Technical Committee ISO/TC 135 “Non-destructive testing” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 7963:2010 by Technical Committee CEN/TC 138 “Non-destructive testing” the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 27963:1992. Endorsement notice The text of ISO 7963:2006 has been approved by CEN as a FprEN ISO 7963:2010 without any modification.

kSIST FprEN ISO 7963:2010
kSIST FprEN ISO 7963:2010
Reference numberISO 7963:2006(E)© ISO 2006

INTERNATIONAL STANDARD ISO7963Second edition2006-09-15Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2 Essais non destructifs — Contrôle par ultrasons — Spécifications relatives au bloc d'étalonnage n° 2

kSIST FprEN ISO 7963:2010

ISO 7963:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.

+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2006 – All rights reserved
kSIST FprEN ISO 7963:2010

ISO 7963:2006(E) © ISO 2006 – All rights reserved iiiContents Page Foreword............................................................................................................................................................iv Introduction........................................................................................................................................................v 1 Scope.....................................................................................................................................................1 2 Normative references...........................................................................................................................1 3 Terms and definitions...........................................................................................................................1 4 Dimensions............................................................................................................................................1 5 Material..................................................................................................................................................1 6 Preparation............................................................................................................................................3 7 Marking..................................................................................................................................................3 8 Method of use........................................................................................................................................3 8.1 Setting of the time base.......................................................................................................................3 8.2 Sensitivity setting and probe checking..............................................................................................5 9 Certificate..............................................................................................................................................7 Annex A (normative)

Calibration block characteristics and use..................................................................8 Bibliography.......................................................................................................................................................9

kSIST FprEN ISO 7963:2010

ISO 7963:2006(E) iv © ISO 2006 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. ISO 7963 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 5, Testing and inspection of welds. This second edition cancels and replaces the first edition (ISO 7963:1985), which has been technically revised. kSIST FprEN ISO 7963:2010

ISO 7963:2006(E) © ISO 2006 – All rights reserved vIntroduction Calibration block No. 2 differs in size and shape from that described in ISO 2400. Calibration block No. 2 is very much smaller and lighter, and its geometry is much simpler. Calibration block No. 2 does not offer as much scope as the larger block; in particular it is not meant to check an ultrasonic flaw detector completely. However, calibration block No. 2 makes it possible, during practical testing, to check simply, from time to time, the setting of the time base and the sensitivity of the ultrasonic equipment. Moreover, it is suited to checking the beam angle and the probe index of miniature angle-beam probes. NOTE Calibration block No. 1 is currently specified in EN 12223. Requests for official interpretations of any aspect of this Inte

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.