EN ISO 11553-2:2008

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

ISO 11553-2:2007 specifies the requirements for laser processing devices, as defined in ISO 11553-1, which are hand-held or hand-operated.
The purpose of ISO 11553-2:2007 is to draw attention to the particular hazards related to the use of hand-held laser and hand-operated laser processing devices and to prevent personal injury. This includes both the areas of hazard analysis and risk assessment as well as protective measures.

Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2: Sicherheitsanforderungen an handgeführte Laserbearbeitungsgeräte (ISO 11553-2:2007)

Dieser Teil der ISO 11553 gilt für Anforderungen an die in ISO 11553-1 definierten Laserbearbeitungsgeräte,
die von Hand geführt oder positioniert werden.
Der Zweck dieses Teiles der ISO 11553 besteht darin, die Aufmerksamkeit auf die besonderen Gefährdungen
zu richten, die mit der Anwendung von handgeführten und handpositionierten Laserbearbeitungsgeräten
verbunden sind und Verletzungen von Personen zu verhindern. Dazu werden sowohl die Bereiche der
Gefährdungsanalyse als auch der Risikobewertung sowie Schutzmaßnahmen erfasst.
Anforderungen mit Bezug auf Lärm als Gefährdung werden in diesem Teil der ISO 11553 nicht erfasst. Diese
Anforderungen müssen in einer Änderung zu einem späteren Zeitpunkt berücksichtigt werden.
Dieser Teil der ISO 11553 ist nicht auf Laserprodukte oder Einrichtungen anwendbar, die nur oder
ausdrücklich für Anwendungen hergestellt werden, die außerhalb des Anwendungsbereichs der ISO 11553-1
liegen.

Sécurité des machines - Machines à laser - Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs (ISO 11553-2:2007)

L'ISO 11553-2:2007 spécifie les exigences applicables aux dispositifs de traitement laser, tels que définis dans l'ISO 11553-1, qui sont portatifs ou actionnés manuellement.
L'objectif de l'ISO 11553-2:2007 est d'attirer l'attention sur les phénomènes dangereux particuliers associés à l'utilisation de dispositifs de traitement laser portatifs et de prévenir les blessures aux personnes. Cela inclut les domaines de l'analyse des phénomènes dangereux et l'évaluation du risque ainsi que les mesures de protection.

Varnost strojev - Laserski obdelovalni stroji - 2. del: Varnostne zahteve za ročne laserske obdelovalne naprave (ISO 11553-2:2007)

General Information

• Status: Published
• Publication Date: 25-Nov-2008
• Withdrawal Date: 27-Dec-2009
• ICS: 13.110 - Safety of machinery
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Drafting Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Nov-2008
• Completion Date: 26-Nov-2008
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 11553-2:2009 - Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

Relations

• Replaces: EN ISO 11553-2:2007 - Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
• Effective Date: 22-Dec-2008
• Revised: prEN ISO 11553-2 - Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO/DIS 11553-2:2016)
• Effective Date: 22-Oct-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 2: Sicherheitsanforderungen an handgeführte Laserbearbeitungsgeräte (ISO 11553-2:2007)Sécurité des machines - Machines à laser - Partie 2: Exigences de sécurité pour dispositifs de traitement laser portatifs (ISO 11553-2:2007)Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)31.260Optoelektronika, laserska opremaOptoelectronics. Laser equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN ISO 11553-2:2008SIST EN ISO 11553-2:2009en01-marec-2009SIST EN ISO 11553-2:2009SLOVENSKI
STANDARDSIST EN ISO 11553-2:20071DGRPHãþD



SIST EN ISO 11553-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11553-2November 2008ICS 13.110; 31.260Supersedes EN ISO 11553-2:2007
English VersionSafety of machinery - Laser processing machines - Part 2:Safety requirements for hand-held laser processing devices(ISO 11553-2:2007)Sécurité des machines - Machines à laser - Partie 2:Exigences de sécurité pour dispositifs de traitement laserportatifs (ISO 11553-2:2007)Sicherheit von Maschinen - Laserbearbeitungsmaschinen -Teil 2: Sicherheitsanforderungen an handgeführteLaserbearbeitungsgeräte (ISO 11553-2:2007)This European Standard was approved by CEN on 7 November 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11553-2:2008: ESIST EN ISO 11553-2:2009



EN ISO 11553-2:2008 (E) 2 Contents Page Foreword.3 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU directives 98/37/EC.4 Annex ZB (informative)
Relationship between this
European
Standard and the Essential Requirements of EU Directive 2006/42/EC.5
SIST EN ISO 11553-2:2009



EN ISO 11553-2:2008 (E) 3 Foreword The text of ISO 11553-2:2007 has been prepared by Technical Committee ISO/TC 172 “Optics and optical instruments” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11553-2:2008 by Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11553-2:2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annex ZA and Annex ZB, which are integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov
...