iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13739-2:2011/AC:2012

(Corrigendum)

Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods

Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods

CEN/TC 144 - Editorial modification to the Introduction in the three language versions.

Landmaschinen - Ausleger- und Wurf-Mineraldüngerstreuer - Umweltschutz - Teil 2: Prüfverfahren

Matériel agricole - Distributeurs d'engrais solides en nappe et centrifuges - Protection de l'environnement - Partie 2 : Méthodes d'essai

Kmetijski stroji - Odlagalni in metalni trosilniki mineralnih gnojil - Varstvo okolja - 2. del: Preskusne metode - Popravek AC

Ta evropski standard opredeljuje preskusne metode za nošene, vlečene in samognane odlagalne in metalne trosilnike mineralnih gnojil, ki se uporabljajo v kmetijstvu in vrtnarstvu.   Ta standard ne velja za stroje, ki so: kombinirane sejalnice za zrnje in gnojila ali oprema za raztros granuliranih pesticidov ali vrstni trosilniki mineralnih gnojil (ki jih obravnavata prEN 13740-1 in prEN 13740-2).  Če je uporabljen izraz »stroj«, zajema odlagalne in metalne trosilnike, razen v definicijah.

General Information

Status
Withdrawn
Publication Date
01-May-2012
Withdrawal Date
20-Nov-2012
ICS
65.060.25 - Equipment for storage, preparation and distribution of fertilizers
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 3 - Mobile machines and trailers
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-Nov-2012
Completion Date
21-Nov-2012
Ref Project
SIST EN 13739-2:2011/AC:2013 - Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods

Relations

Corrects
EN 13739-2:2011 - Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods
Effective Date
11-Apr-2012

Buy Standard

EN 13739-2:2011/AC:2013EN 13739-2:2011/AC:2013
PreviousNext
Corrigendum
EN 13739-2:2011/AC:2013
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kmetijski stroji - Odlagalni in metalni trosilniki mineralnih gnojil - Varstvo okolja - 2. del: Preskusne metode - Popravek ACLandmaschinen - Ausleger- und Wurf-Mineraldüngerstreuer - Umweltschutz - Teil 2: PrüfverfahrenMatériel agricole - Distributeurs d'engrais solides en nappe et centrifuges - Protection de l'environnement - Partie 2 : Méthodes d'essaiAgricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods65.060.25JQRMLYEquipment for storage, preparation and distribution of fertilizers13.020.99Drugi standardi v zvezi z varstvom okoljaOther standards related to environmental protectionICS:Ta slovenski standard je istoveten z:EN 13739-2:2011/AC:2012SIST EN 13739-2:2011/AC:2013en,fr,de01-december-2013SIST EN 13739-2:2011/AC:2013SLOVENSKI
STANDARDSIST EN 13739-2:2011/AC:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13739-2:2011/AC
November 2012
Novembre 2012
November 2012 ICS 65.060.25 English version Version Française Deutsche Fassung
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods
Matériel agricole - Distributeurs d'engrais solides en nappe et centrifuges - Protection de l'environnement - Partie 2 : Méthodes d'essai
Landmaschinen - Ausleger- und Wurf-Mineraldüngerstre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 707:2018(Main)
Agricultural machinery - Slurry tankers - Safety
SIST EN 707:2019

This document, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of semi-mounted, trailed and self-propelled slurry tankers, including their spreading or injecting devices, intended for spreading or injecting slurry which are operated by either pneumatic or mechanical power. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document.
This document, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to slurry tankers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table A.1), excepting the hazards related to road safety (e.g. steering, braking).
Environmental aspects have not been considered in this document.
This document is not applicable to slurry tankers which are manufactured before the date of its publication as EN.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4254-8:2018(Main)
Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)
SIST EN ISO 4254-8:2018

ISO 4254-8:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application in agriculture and to be used by one operator only, e.g. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors, as well as solid fertilizer distributors driven by an auxiliary engine. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 4254-8:2018 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4), excepting the hazards arising from:
-      inadequate lighting of working area;
-      inadequate visibility from drivers/operators position;
-      inadequate seating;
-      travelling functions (drive, braking etc.);
-      rolling over;
-      equipment for loading fertilizer into the machine;
-      an auxiliary engine;
-      moving parts for power transmission except for strength requirements for guards.
ISO 4254-8:2018 is neither applicable to maintenance or repairs carried out by professional service personnel nor to environmental hazards (except noise).
ISO 4254-8:2018 is not applicable to the following:
-      combined seed and fertilizer drills which create a soil trench and deposit fertilizer in said trench;
-      machines for distributing granulated pesticides;
-      pedestrian controlled distributors;
-      knapsack distributors.
ISO 4254-8:2018 is not applicable to solid fertilizer distributors which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 690:2013(Main)
Agricultural machinery - Manure spreaders - Safety
SIST EN 690:2014

This European Standard, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled, mounted, semi-mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with vertical axes disc rear spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document.
This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to manure spreaders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table 1), excepting the hazards arising from:
-   vibrations of self-propelled machinery;
-   travelling function of self-propelled machinery;
-   overturning in regard to the protection of the operator at the driving station of a self-propelled machine;
-   hazards related to conveying devices other than those defined in 3.3.1 and 3.3.2, for example load push/push-off device.
NOTE 1   Regarding roll-over protection for self-propelled agricultural machinery, see EN ISO 16231-1.
NOTE 2   This European Standard is neither applicable to environmental hazards nor to road safety. Environmental aspects are dealt with in EN 13080.
This European Standard does not apply to manure spreaders with laterally mounted spreading device as defined in 3.6.
This European Standard is not applicable to manure spreaders which are manufactured before the date of publication of this document by CEN.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16119-2:2013(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)
SIST EN ISO 16119-2:2013

ISO 16119-2:2013 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.
It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. It does not cover safety aspects (see ISO 4254-6).
ISO 16119-2:2013 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16119-1:2013(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)
SIST EN ISO 16119-1:2013

ISO 16119-1:2013 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook.
It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). ISO 16119-1:2013 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254-6).
NOTE          Knapsack sprayers are covered by ISO 19932, which deals with safety as well as environmental aspects.
ISO 16119-1:2013 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16119-3:2013(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
SIST EN ISO 16119-3:2013

ISO 16119-3:2013 specifies requirements and the means for their verification for the design and performance of sprayers for bush, tree and similar crops, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.It is not applicable to human-mounted sprayers for bushes or trees.
It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. It does not cover safety aspects (see ISO 4254-6).
ISO 16119-3:2013 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13739-1:2011(Main)
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements
SIST EN 13739-1:2011

This European Standard specifies requirements for the environmental protection for design and construction of mounted, trailed and self-propelled full width solid fertilizer distributors and solid fertilizer broadcasters used in agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook.
The standard does not apply to machines which are:
a)   combined grain and fertilizer drills; or
b)   equipment for distributing granulated pesticides; or
c)   solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
Personal safety aspects have not been considered in this standard; they are dealt with in EN 14017:2005+A2:2009.
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the definitions.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13739-2:2011(Main)
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods
SIST EN 13739-2:2011

This European Standard specifies methods to test mounted, trailed and self-propelled broadcasters and full width solid fertilizer distributors used in agriculture and horticulture.
This European Standard does not apply to machines which are:
-   combined grain and fertilizer drills; or
-   equipment for distributing granulated pesticides; or
-   solid fertilizer line-distributors (which are dealt with in EN 13740-1:2003 and in EN 13740-2:2003).
If the term ‘machine’ is used it covers both full width distributors and broadcasters, except in the case of definitions in Part 1.
Two different methods are described in this European Standard to carry out the evaluation test: a transverse test and a rotating test. The rotating test is mainly adapted to centrifugal spreaders.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13740-1:2003(Main)
Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 1: Requirements
SIST EN 13740-1:2004

This Standard specifies requirements for the environmental safety for design and construction of mounted, trailed and self-propelled solid fertilizer distributors in lines, including such machines attached to a basic machine, used in agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook. NOTE The standard is also applicable to drilling machines if it is stated by the machine manufacturer that the machine is suitable for fertilizer application.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13740-2:2003(Main)
Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 2: Test methods
SIST EN 13740-2:2004

This Standard specifies methods to test mounted, trailed and self-propelled solid fertilizer in lines distributors including such machines attached to a basic machine, used in agriculture and horticulture. The standard does not apply to machines which are: - combined grain and fertilizer drills or; - equipment for distributing liquid or granulated pesticides. NOTE: The standard is also applicable to drilling machines if it is stated by the machine manufacturer that the machine is suitable for fertilizer application. If both drilling and spreading in lines distributors are meant, the term machine will cover them both.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day