Railway applications - Adhesive bonding of rail vehicles and their components

This document defines terms and specifies requirements for adhesive bonding and sealing work in rail vehicles and their components independent of the material of the adherend and the solidification mechanism, strength, and deformation properties of the adhesives.
This document is applicable to adhesive bonding and sealing adherends in the:
-   development (pre-production);
-   production (in-production);
-   maintenance including repair (post-production);
-   quality assurance of production, inspection, maintenance including repair of rail vehicles and their components.
This document is not applicable to:
-   screw retention by the usage of adhesives, if a screw assembly without further safeguard of identical joint design is sufficient for the purpose;
-   hybrid joints, if the expected function is given exclusively by another joining technology e.g. welding, screwing, riveting;
-   production of vulcanizates;
-   production of plywood;
-   production of fibre reinforced plastic composites (FRP-composites);
-   production of laminated safety glass;
-   pure encapsulating of electronic parts;
-   application of single-sided adhesive decorative films.

Bahnanwendungen - Kleben von Schienenfahrzeugen und deren Komponenten

Dieses Dokument definiert Begriffe und legt Anforderungen für Kleb- und Dichtarbeiten an Schienenfahr¬zeugen und deren Komponenten fest, unabhängig von dem Werkstoff des Fügeteils und dem Verfestigungs¬mechanismus, der Festigkeit sowie den Verformungseigenschaften der Klebstoffe.
Dieses Dokument ist anzuwenden für das Kleben und Dichten von Fügeteilen in der:
—   Entwicklung (vor der Produktion [en: pre-production]);
—   Herstellung (während der Produktion [en: in-production]);
—   Instandhaltung einschließlich Reparatur/Instandsetzung (nach der Produktion [en: post-production]);
—   Qualitätssicherung bei der Herstellung, Inspektion, Instandhaltung und Instandsetzung von Schienen¬fahrzeugen und deren Komponenten.
Dieses Dokument ist nicht anzuwenden für:
—   Schraubensicherung unter Einsatz von Klebstoffen, wenn eine Verschraubung ohne weitere Sicherung bei gleicher Ausführung der Verbindung ausreichend ist;
—   Hybridverbindungen, wenn die erwartete Funktion ausschließlich durch eine andere Fügetechnik wie etwa Schweißen, Schrauben oder Nieten erzielt wird;
—   die Herstellung von Vulkanisaten;
—   die Herstellung von Sperrholz;
—   die Herstellung von Faserverbund-Kunststoff-Formteilen (FVK);
—   die Herstellung von Verbundsicherheitsglas;
—   den reinen Verguss von Elektronikteilen;
—   die Applikation einseitig klebender dekorativer Folien.

Applications ferroviaires - Assemblage par collage de véhicules et de pièces ferroviaires

Le présent document définit les termes et spécifie les exigences relatives aux travaux d’étanchéité et d'assemblage par collage réalisés sur les véhicules ferroviaires et leurs composants indépendamment du matériau du support et du mécanisme de solidification, de la résistance et des propriétés de déformation des adhésifs.
Le présent document est applicable aux supports d’étanchéité et d'assemblage par collage dans le cadre :
—   du développement (préproduction) ;
—   de la production ;
—   de la maintenance, y compris de la réparation (postproduction) ;
—   de l'assurance de la qualité de la production, du contrôle, de la maintenance (notamment de la réparation) des véhicules ferroviaires et de leurs composants.
Le présent document ne s'applique pas :
—   à la retenue de vis par l'usage d'adhésifs, si un assemblage par vissage sans autre mesure de sécurité de conception de joint identique suffit ;
—   aux joints hybrides, si la fonction attendue est exclusivement remplie par une autre technologie d'assemblage telle que le soudage, le vissage, le rivetage ;
—   à la production de produits vulcanisés ;
—   à la production de contreplaqué ;
—   à la production de matériaux composites plastiques renforcés de fibres (composites PRF) ;
—   à la production de verre de sécurité feuilleté ;
—   au simple encapsulage de pièces électroniques ;
—   à l'application de films décoratifs adhésifs simple face.

Železniške naprave - Lepilno spajanje za železniška vozila in njihove komponente

Ta dokument določa splošne pogoje in osnovne zahteve za delo v zvezi z lepljenjem oziroma tesnjenjem in zahteve za uporabnike lepil (v nadaljevanju: uporabniška podjetja) in je najsodobnejši pristop k organizaciji procesov lepljenja in tesnjenja v železniški industriji.
Ta dokument se uporablja za lepljenje in tesnjenje lepljencev za:
–   razvoj železniških vozil in njihovih sestavnih delov    (pred proizvodnjo);
–   proizvodnjo železniških vozil in njihovih sestavnih delov    (med proizvodnjo);
–   vzdrževanje in popravilo železniških vozil ter njihovih sestavnih delov   (po proizvodnji); in
–   zagotavljanje kakovosti proizvodnje, kontrolo, vzdrževanje in popravilo železniških vozil ter njihovih sestavnih delov.
Ta dokument se uporablja za vse lepljene spoje v železniških vozilih in njihove sestavne dele, ne glede na material lepljenca. Prav tako se uporablja za vse vrste lepil, ne glede na njihov mehanizem strjevanja, moč in deformacijske lastnosti.
Ta dokument se ne uporablja za:
–   pritrjevanje vijakov z uporabo lepil, če za ta namen zadostuje čisti sklop vijakov z enako zasnovo;
–   hibridne spoje, če pričakovano funkcijo zagotavlja izključno druga tehnologija spajanja, na primer varjenje, privijanje, zakovičenje;
–   proizvodnjo vulkanizerskih izdelkov, pri kateri ne nastanejo lepljeni spoji;
–   proizvodnjo vezanih plošč;
–   proizvodnjo z vlakni ojačenih polimernih kompozitov (FRP-kompoziti);
–   proizvodnjo s stekleno tkanino ojačenih laminiranih plošč (LSG);
–   čisto enkapsulacijo elektronskih delov; in
–   enostransko lepilne dekorativne folije.

General Information

Status
Published
Publication Date
19-Jul-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Jul-2022
Due Date
08-Dec-2021
Completion Date
20-Jul-2022

Buy Standard

Standard
EN 17460:2022
English language
99 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17460:2020 - BARVE
English language
123 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17460:2022
01-september-2022
Železniške naprave - Lepilno spajanje za železniška vozila in njihove komponente
Railway applications - Adhesive bonding of rail vehicles and their components
Bahnanwendungen - Kleben von Schienenfahrzeugen und deren Komponenten
Applications ferroviaires - Collage par collage de véhicules et de pièces ferroviaires
Ta slovenski standard je istoveten z: EN 17460:2022
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
83.180 Lepila Adhesives
SIST EN 17460:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17460:2022

---------------------- Page: 2 ----------------------
SIST EN 17460:2022


EN 17460
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2022
EUROPÄISCHE NORM
ICS 45.060.01; 83.180
English Version

Railway applications - Adhesive bonding of rail vehicles
and their components
Applications ferroviaires - Collage par collage de Bahnanwendungen - Kleben von Eisenbahnfahrzeugen
véhicules et de pièces ferroviaires und deren Teilen
This European Standard was approved by CEN on 22 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17460:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17460:2022
EN 17460:2022 (E)
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Competences of adhesive bonding personnel . 14
4.1 General . 14
4.2 Competences of coordinators . 15
4.3 Competences of the adhesive bonding operators . 17
5 Design and verification of adhesively bonded joints on rail vehicles . 17
5.1 General . 17
5.2 Design process. 17
5.2.1 Flow chart . 17
5.2.2 List of requirements . 18
5.2.
...

SLOVENSKI STANDARD
oSIST prEN 17460:2020
01-februar-2020
Železniške naprave - Lepilno spajanje za železniška vozila in dele
Railway applications - Adhesive bonding of rail vehicles and parts
Bahnanwendungen - Schienenfahrzeuge - Kleben von Schienenfahrzeugen und
Schienenfahrzeugteilen
Applications ferroviaires - Assemblage par collage de véhicules et pièces ferroviaires
Ta slovenski standard je istoveten z: prEN 17460
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
83.180 Lepila Adhesives
oSIST prEN 17460:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17460:2020

---------------------- Page: 2 ----------------------
oSIST prEN 17460:2020


DRAFT
EUROPEAN STANDARD
prEN 17460
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2019
ICS 45.060.01; 83.180
English Version

Railway applications - Adhesive bonding of rail vehicles
and parts
Applications ferroviaires - Assemblage par collage de Bahnanwendungen - Schienenfahrzeuge - Kleben von
véhicules et pièces ferroviaires Schienenfahrzeugen und Schienenfahrzeugteilen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17460:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17460:2020
prEN 17460:2019 (E)
Contents Page
European foreword . 7
Introduction . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Requirements . 15
4.1 General . 15
4.2 Competence of personnel– minimum requirements . 15
4.3 Special process requirements . 16
5 Design and verification of adhesively bonded joints on railway vehicles . 16
5.1 General . 16
5.2 Design process.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.