EN 1986-2:2001
(Main)Electrically propelled road vehicles - Measurement of energy performances - Part 2: Thermal electric hybrid vehicles
Electrically propelled road vehicles - Measurement of energy performances - Part 2: Thermal electric hybrid vehicles
This standard aims at defining the range in pure electric driving mode and the consumption measurements for a thermal electric hybrid road vehicle from M1, N1, or M2 2) category, and for tricycles and quadricycles from the motorcycle types 3) .
This standard applies to the above-mentioned vehicles whose range and consumption can be tested following the provisions already laid down for conventional vehicles (i.e. Internal Combustion Engine vehicle) from the equivalent categories.
Elektrisch angetriebene Straßenfahrzeuge - Messverfahren für Energieausnutzung - Teil 2: Thermische hybride Elektrofahrzeuge
Diese Europäische Norm legt die Reichweite, die im reinen elektrischen Fahrmodus erreicht wird, und die Verbrauchsmessung von einem thermisch hybriden elektrischen Straßenfahrzeug der Kategorien M1, N1 oder M2 ) und für drei- und vierrädrige Kraftfahrzeuge des Motorradtyps ) fest.
Diese Norm gilt für die o. g. Fahrzeuge, deren Reichweite und Verbrauch nach den bereits festgelegten Methoden für konventionell angetriebene Fahrzeuge gleicher Kategorie (d. h. Fahrzeuge mit Verbrennungsmotoren) geprüft werden können.
Véhicules routiers à propulsion électrique - Mesurage des performances énergétiques - Partie 2: Véhicules hybrides électriques thermiques
Domaine d'application
La présente norme définit le mesurage de l'autonomie en mode électrique pur et celui de la consommation des véhicules routiers hybrides électriques thermiques des catégories M1, N1 ou M2 2) ainsi que des tricycles et quadricycles à moteur de motocycle 3).
La présente norme s'applique aux véhicules ci-dessus mentionnés dont l'autonomie et la consommation peuvent être contrôlés en suivant les dispositions déjà fixées pour les véhicules conventionnels (à savoir les véhicules à moteur à combustion interne) des catégories équivalentes.
Electrically propelled road vehicles - Measurement of energy performances - Part 2: Thermal electric hybrid vehicles
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2002
Electrically propelled road vehicles - Measurement of energy performances - Part
2: Thermal electric hybrid vehicles
Electrically propelled road vehicles - Measurement of energy performances - Part 2:
Thermal electric hybrid vehicles
Elektrisch angetriebene Straßenfahrzeuge - Messverfahren für Energieausnutzung - Teil
2: Thermische hybride Elektrofahrzeuge
Véhicules routiers a propulsion électrique - Mesurage des performances énergétiques -
Partie 2: Véhicules hybrides électriques thermiques
Ta slovenski standard je istoveten z: EN 1986-2:2001
ICS:
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 1986-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2001
ICS 43.120
English version
Electrically propelled road vehicles - Measurement of energy
performances - Part 2: Thermal electric hybrid vehicles
Véhicules routiers à propulsion électrique - Mesurage des Elektrisch angetriebene Straßenfahrzeuge - Meßverfahren
performances énergétiques - Partie 2: Véhicules hybrides für Energieausnutzung - Teil 2: Thermische hybride
électriques thermiques Elektrofahrzeuge
This European Standard was approved by CEN on 8 March 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1986-2:2001 E
worldwide for CEN national Members.
Page 2
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Measurement of the range in pure electric mode.6
5 Measurement of the electric energy consumption in pure electric mode .6
6 Measurement of the consumption .7
6.1 Principle.7
6.2 Cycle.7
6.3 Equipment.7
6.4 Fuel.7
6.5 Parameters, units and accuracy of measurements.8
6.6 Test conditions .8
6.7 Operation mode.9
6.8 Expressions of the result.9
Annexe A (normative) Measurement of the consumption .10
A.1 General.10
A.2 Recorded values .10
A.3 Fuel consumption .11
A.4 Calculation of the electric consumption .15
A.5 Expressions of the result.15
Annexe B (informative) Example of calculation of emission of gases with a continuous analysis method .16
B.1 General.16
B.2 Measured values for consumption .16
B.3 Calculation.17
B.4 Expression of the results.18
Annexe C (informative) Energetic values of fuel.19
Annexe D (informative) Technical information on the test thermal electric hybrid vehicle .20
Annexe E (informative) Test report on energy performances of a thermal electric hybrid vehicle.21
Bibliography .22
Page 3
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 301 "Electrically propelled road
vehicles", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latest
by October 2001.
CEN TC301 is dealing with "Electrically propelled road vehicles". This title includes, in fact, a wide range of electric
road vehicles (see the definitions in EN 13447:2001) which can be divided as follows:
- pure electric vehicle : this is an electrically propelled and infrastructure independent exclusively electrically
supplied road vehicle ;
- road vehicle fitted with an electric transmission : this vehicle remains in the scope of CEN/TC301 but is
considered as a conventional (e.g. an internal combustion engine vehicle) vehicle with a specific transmission
(no standards to be developed);
1)
- thermal electric hybrid vehicles where the thermal engine has such a low level of power compared to that of
the power train may be treated as a pure electric vehicle from the measuring point of view;
- other infrastructure independent electric vehicles which are today called electric hybrid vehicles. These electric
hybrid vehicles can run with a zero level pollutant emission;
- infrastructure dependent electrically propelled road vehicles are excluded from application of this standard.
A large amount of work has been undertaken on electric hybrid vehicles, and there is still a lot to discover on these
vehicles which can, for instance, incorporate several driving modes (more than two);
To remain today within what is most common, the term thermal electric hybrid vehicle will be understood as an
electric road vehicle fitted with a thermal machine (which is fed with fuel).
This European Standard EN 1986 consists of the following parts, under the general title "Electrically propelled road
vehicles - Measurement of energy performances" :
- Part 1 : Pure electric vehicles ;
- Part 2 : Thermal electric hybrid vehicles ;
- Part 3 : Other electric hybrid vehicles than those fitted with a thermal machine.
Annex A forms an integral part of EN 1986-2.
Annex B to Annex E are for information only.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
1)
In order to be able to use existing measuring facilities.
Page 4
1 Scope
This standard aims at defining the range in pure electric driving mode and the consumption measurements for a
2)
category, and for tricycles and quadricycles from the
thermal electric hybrid road vehicle from M , N , or M
1 1 2
3)
motorcycle types .
This standard applies to the above-mentioned vehicles whose range and consumption can be tested following the
provisions already laid down for conventional vehicles (i.e. Internal Combustion Engine vehicle) from the equivalent
categories.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 1821-1 Electrically propelled road vehicles - Measurement of road
operating ability - Part 1: Pure electric vehicles
EN 1986-1:1997 Electrically propelled road vehicles - Measurement of energy
performances - Part 1 : Pure electric vehicles
EN 13447:2001 Electrically propelled road vehicles - Terminology
EN ISO 3675 Crude petroleum and liquid petroleum products - Laboratory
determination of density - Hydrometer method (ISO 3675:1998)
3 Terms and definitions
For the purposes of this European Standard, the following terms and definitions apply (see also EN 13447:2001).
3.1
electrically propelled road vehicle
road vehicle in which electric energy is transformed by electrical machine(s) into mechanical energy for traction
purposes
NOTE Traction is the term used with the same meaning as propulsion, but for historical reasons, this is the most widely
used term.
3.2
electric hybrid (road) vehicle
hybrid (road) vehicle in which one of the reversible energy source delivers electric energy
2)
Categories of vehicle M , N , and M are defined in Directive 92/53/EEC. In practice, tricycles and quadricycles with a
1 1 2
maximum speed over 45 km/h fall within the scope of this standard.
3)
Motor tricyles and quadricycles are defined in Directive 92/61/EEC.
Page 5
3.3
thermal electric hybrid vehicle
electric hybrid vehicle in which the traction system contains a thermal machine
NOTE Vehicle integrating electric machine(s) for functional assistance to the engine such as load levelling devices, starter,
electrically driven auxiliary units, etc. should not be considered as electric hybrid vehicles, in so far they do not participate to the
traction.
3.4
pure electric mode
driving mode when only the secondary on board electric energy source delivers energy for traction purpose. The
pure electric mode can be either selected by the driver or automatically selected by the system
For definitions of primary or secondary on board electric energy source, refer to EN 13447:2001 (Terminology).
3.5
pure thermal mode
for a thermal electric hybrid vehicle is the driving mode which can be selected by the driver when only the
additional other kind of on board energy source (including the thermal machine) participates in the propulsion of the
vehicle. In this case, the on board secondary electric energy source is not active even for energy recovery
3.6
hybrid mode (for an electric hybrid vehicle)
another driving mode than the pure electric mode, if selected by the driver, or the pure thermal mode. All the on
board energy sources can participate in the propulsion of the vehicle in accordance with the management system
logic. The hybrid mode includes the pure electric mode when it is automatically selected by the system
3.7
series electric hybrid vehicle
series hybrid vehicle in which all energy sources deliver electric energy
3.8
parallel electric hybrid vehicle
electric hybrid vehicle for which the wheel propulsion is produced either by the electric drive train and/or by the
additional form of on board energy source delivering mechanical power, both through a transmission which can be
common or individual
3.9
on board energy source
subsystem of the traction system consisting of a combination of at least storage(s) and possibly converter(s),
transmission(s), ancillary device(s). The on-board energy source delivers energy to the power train for traction
purpose
EXAMPLE 1
For a pure electr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.