iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 17984-4

(Main)

Assistance dogs - Part 4: Pre-training, training and tasks

Assistance dogs - Part 4: Pre-training, training and tasks

This document defines standards for the training of assistance dogs. Assistance dogs may be
trained by structured programmes/schools, owner-trained under supervision or ownertrainers.
Specifically, this document deals with the following topics:
- Preparation of assistance dogs
- Socialization and puppy raising of assistance dogs
- Training of assistance dogs
- Guide Dogs
- Hearing Dogs
- Mobility Assistance Dogs
- PTSD Assistance Dogs
- Medical Alert Response Assistance Dogs
- Autism and Developmental Disorder Assistance Dogs
- Dual Purpose Assistance Dogs

Assistenzhunde - Teil 4: Grundausbildung, Ausbildung und Aufgaben

Chiens d’assistance - Partie 4 : Prééducation, éducation et tâches

Le présent document définit des règles relatives à l’éducation des chiens d’assistance. Les chiens d’assistance peuvent être éduqués par des écoles/programmes structurés, par leur propriétaire sous supervision ou par les propriétaires qui éduquent eux-mêmes leurs chiens.
Le présent document traite de manière spécifique les sujets suivants :
-   la préparation des chiens d’assistance ;
-   la socialisation et le développement des chiots destinés à devenir des chiens d’assistance ;
-   l’éducation des chiens d’assistance ;
-   les chiens guides ;
-   les chiens écouteurs ;
-   les chiens d’assistance pour personnes à mobilité réduite ;
-   les chiens d’assistance pour SSPT ;
-   les chiens d’alerte/de réponse médicales ;
-   les chiens d’assistance pour autisme et troubles du développement ;
-   les chiens d’assistance à double spécialité.

Psi pomočniki - 4. del: Usposabljanje in ocenjevanje

General Information

Status
Not Published
Publication Date
02-Jul-2025
ICS
11.180.99 - Other standards related to aids for disabled and handicapped people
65.020.30 - Animal husbandry and breeding
Technical Committee
CEN/TC 452 - Assistance Dog & Guide Dog Teams Standards and Instructors Competences
Drafting Committee
CEN/TC 452/WG 4 - Training and assessment
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
04-Apr-2024
Due Date
15-Feb-2024
Completion Date
04-Apr-2024
Ref Project
oSIST prEN 17984-4:2024 - Assistance Dogs — Part 4: Training and Assessment

Buy Standard

prEN 17984-4:2024prEN 17984-4:2024
PreviousNext
Draft
prEN 17984-4:2024
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17984-4:2024
01-april-2024
Psi pomočniki - 4. del: Usposabljanje in ocenjevanje
Assistance Dogs — Part 4: Training and Assessment
Assistenzhunde - Ausbildung und Beurteilung
Ta slovenski standard je istoveten z: prEN 17984-4
ICS:
11.180.99 Drugi standardi v zvezi s Other standards related to
pripomočki za invalide aids for disabled and
handicapped people
65.020.30 Živinoreja Animal husbandry and
breeding
oSIST prEN 17984-4:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17984-4:2024

---------------------- Page: 2 ----------------------
oSIST prEN 17984-4:2024


DRAFT
EUROPEAN STANDARD
prEN 17984-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2024
ICS 11.180.99; 65.020.30
English Version

Assistance Dogs - Part 4: Training and Assessment
 Assistenzhunde - Ausbildung und Beurteilung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 452.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17984-4:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17984-4:2024
prEN 17984-4:2024(E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Preparation of assistance dogs . 5
5 Socialization and Puppy Raising . 6
6 Training . 7
7 Guide Dogs . 9
8 Hearing Dogs . 10
9 Mobility Assistance Dogs . 10
10 PTSD Assistance Dogs . 11
11 Medical Alert Response Assistance Dogs .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
prEN 17984-2(Main)
Assistance dogs - Part 2: Dog lifetime welfare
oSIST prEN 17984-2:2024

The purpose of this document is to protect the welfare of assistance dogs. For this, it sets out requirements based on the Five Domains Paradigm to ensure the dog’s welfare.
The requirements apply:
- throughout the whole life of the dog.
- for all types of assistance dogs.
- for all people/caregivers/handlers who are entrusted with a dog at any point during its lifetime.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 17984-6(Main)
Assistance dogs - Part 6: Accessibility and Universal Access
oSIST prEN 17984-6:2023

This European standard specifies requirements and recommendations for the accessibility of public and private spaces and universal access for assistance dog teams in an active status.
The accessibility requirements and recommendations for assistance dog teams in this European standard are applicable across the full spectrum of the built environment both indoor and outdoor (e.g. social service, medical and educational facilities, public institutions, cultural venues, sporting venues, hotel accommodation, public transport, parks, nature reserves).
The purpose of this European standard is to improve the accessibility for assistance dog teams ensuring their rights under the United Nations Convention on the Rights of Persons with Disabilities, so that they have the same opportunities as all citizens and can participate independently in all areas of life.
This European standard provides:
• Specific requirements of assistance dog teams to support accessibility and to achieve universal access.
• Responsibilities of assistance dog teams to enhance the public acceptance of assistance dogs.
• Guidance for specific services and areas to be accessed.
• Guidance for the implementation of accessibility measures at public and private bodies responsible for the built environment including transport and travel systems.  
This European standard includes all private spaces, where public is generally admitted, or where public can be accommodated (e.g. office buildings, waiting rooms, common areas of apartment buildings).
This European standard may be applied to improve accessibility of assistance dog teams in the workplace.
This European standard may be applied to assistance dogs in training and puppies preparing for an assistance dog role.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 17984-1(Main)
Assistance dogs - Part 1: Vocabulary
oSIST prEN 17984-1:2023

This document specifies the terms and definitions that apply to:
-   different types of assistance dogs;
-   the beneficiary and client services;
-   health and disabilities;   
-   assistance dog service providers;   
-   assistance dog training staff and related professionals;
-   the socialization and training processes;
-   conformity assessment, identification and registration;
-   accessibility.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 17984-2(Main)
Assistance dogs - Part 2: Dog lifetime welfare
oSIST prEN 17984-2:2024

The purpose of this document is to protect the welfare of assistance dogs. For this, it sets out requirements based on the Five Domains Paradigm to ensure the dog’s welfare.
The requirements apply:
- throughout the whole life of the dog.
- for all types of assistance dogs.
- for all people/caregivers/handlers who are entrusted with a dog at any point during its lifetime.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 17984-6(Main)
Assistance dogs - Part 6: Accessibility and Universal Access
oSIST prEN 17984-6:2023

This European standard specifies requirements and recommendations for the accessibility of public and private spaces and universal access for assistance dog teams in an active status.
The accessibility requirements and recommendations for assistance dog teams in this European standard are applicable across the full spectrum of the built environment both indoor and outdoor (e.g. social service, medical and educational facilities, public institutions, cultural venues, sporting venues, hotel accommodation, public transport, parks, nature reserves).
The purpose of this European standard is to improve the accessibility for assistance dog teams ensuring their rights under the United Nations Convention on the Rights of Persons with Disabilities, so that they have the same opportunities as all citizens and can participate independently in all areas of life.
This European standard provides:
• Specific requirements of assistance dog teams to support accessibility and to achieve universal access.
• Responsibilities of assistance dog teams to enhance the public acceptance of assistance dogs.
• Guidance for specific services and areas to be accessed.
• Guidance for the implementation of accessibility measures at public and private bodies responsible for the built environment including transport and travel systems.  
This European standard includes all private spaces, where public is generally admitted, or where public can be accommodated (e.g. office buildings, waiting rooms, common areas of apartment buildings).
This European standard may be applied to improve accessibility of assistance dog teams in the workplace.
This European standard may be applied to assistance dogs in training and puppies preparing for an assistance dog role.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 17984-1(Main)
Assistance dogs - Part 1: Vocabulary
oSIST prEN 17984-1:2023

This document specifies the terms and definitions that apply to:
-   different types of assistance dogs;
-   the beneficiary and client services;
-   health and disabilities;   
-   assistance dog service providers;   
-   assistance dog training staff and related professionals;
-   the socialization and training processes;
-   conformity assessment, identification and registration;
-   accessibility.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day