EN 14140:2003+A1:2006

LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to ambient temperatures. It allows alternative design and construction methods to those required in EN 1442.
This European Standard applies only to cylinders with a circular cross-section.
All pressures are gauge unless otherwise stated.

Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare, geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Alternative Gestaltung und Konstruktion

Diese Europäische Norm legt Mindestanforderungen an Werkstoff, Gestaltung, Konstruktion und Ausführung, Herstellungsverfahren und Prüfung während der Herstellung ortsbeweglicher, wiederbefüllbarer, geschweißter Flüssiggasflaschen (LPG) aus Stahl mit einem Fassungsraum von 0,5 l bis einschließlich 150 l fest, die der Umgebungstemperatur ausgesetzt werden, um die in EN 1442 geforderten alternativen Gestaltungs- und Konstruktionsverfahren zu ermöglichen.
Diese Europäische Norm gilt nur für Flaschen mit rundem Querschnitt.
Alle Drücke sind Überdrücke, falls nicht anders angegeben.

Equipements pour GPL et leurs accessoires - Bouteilles en acier soudé transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Autres solutions en matière de conception et construction

La présente Norme européenne spécifie les exigences minimales concernant la conception, la construction et les essais lors de la fabrication des bouteilles en acier soudées, transportables et rechargeables pour le gaz de pétrole liquéfié (GPL) d’une capacité en eau comprise entre 0,5 l et 150 l inclus, soumises à la température ambiante. Elle autorise, en matière de conception et de fabrication, l’utilisation de solutions différentes de celles requises dans l’EN 1442.
La présente Norme européenne s’applique uniquement aux bouteilles de section transversale circulaire.
Sauf indication contraire, toutes les pressions sont des pressions relatives.

Oprema in pribor za utekočinjeni naftni plin (UNP) – Premične, ponovno polnljive varjene jeklene jeklenke za UNP – Alternativni način konstruiranja in izdelave

General Information

• Status: Withdrawn
• Publication Date: 05-Dec-2006
• Withdrawal Date: 02-Dec-2014
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 1 - Design and manufacture of LPG pressure vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 03-Dec-2014
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: TRRTP121 - Sklep o objavi prilog A in B k Evropskemu sporazumu o mednarodnem cestnem prevozu nevarnega blaga (ADR)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14140:2004+A1:2007 - LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction

Relations

• Merged From: EN 14140:2003 - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction
• Effective Date: 18-Jan-2023
• Replaced By: EN 14140:2014 - LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
• Effective Date: 10-Dec-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and constructionEquipements pour GPL et leurs accessoires - Bouteilles en acier soudé transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Autres solutions en matiere de conception et constructionFlüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare, geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Alternative Gestaltung und KonstruktionTa slovenski standard je istoveten z:EN 14140:2003+A1:2006SIST EN 14140:2004+A1:2007en23.020.30MHNOHQNHPressure vessels, gas cylindersICS:SLOVENSKI
STANDARDSIST EN 14140:2004+A1:200701-april-2007







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14140:2003+A1
December 2006 ICS 23.020.30 English Version
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
Equipements pour GPL et leurs accessoires -Bouteilles en acier soudé transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Autres solutions en matière de conception et construction
Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare, geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Alternative Gestaltung und KonstruktionThis European Standard was approved by CEN on 10 July 2003 and includes Amendment 1 approved by CEN on 2 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14140:2003+A1:2006: E



EN 14140:2003+A1:2006 (E) 2 Contents page Foreword.4 Introduction.5 1 Scope.5 2 Normative references.5 3 Terms, definitions and symbols.7 3.1 Terms and definitions.7 3.2 Symbols.7 4 Materials.8 5 Design.8 5.1 General requirements.8 5.2 Calculation of cylindrical shell thickness.9 5.3 Design of torispherical and semi-ellipsoidal ends concave to pressure.9 5.4 Ends of other shapes.13 5.5 Minimum wall thickness.13 5.6 Design of openings.
...