EN ISO 4254-8:2018
(Main)Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)
Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)
ISO 4254-8:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application in agriculture and to be used by one operator only, e.g. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors, as well as solid fertilizer distributors driven by an auxiliary engine. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 4254-8:2018 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4), excepting the hazards arising from:
- inadequate lighting of working area;
- inadequate visibility from drivers/operators position;
- inadequate seating;
- travelling functions (drive, braking etc.);
- rolling over;
- equipment for loading fertilizer into the machine;
- an auxiliary engine;
- moving parts for power transmission except for strength requirements for guards.
ISO 4254-8:2018 is neither applicable to maintenance or repairs carried out by professional service personnel nor to environmental hazards (except noise).
ISO 4254-8:2018 is not applicable to the following:
- combined seed and fertilizer drills which create a soil trench and deposit fertilizer in said trench;
- machines for distributing granulated pesticides;
- pedestrian controlled distributors;
- knapsack distributors.
ISO 4254-8:2018 is not applicable to solid fertilizer distributors which are manufactured before the date of its publication.
When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.
Landmaschinen - Sicherheit - Teil 8: Mineraldüngerstreuer (ISO 4254-8:2018)
Matériel agricole - Sécurité - Partie 8: Distributeurs d'engrais solides (ISO 4254-8:2018)
ISO 4254-8:2018, destiné à être utilisé conjointement avec l'ISO 4254‑1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction des distributeurs d'engrais portés, semi-portés, traînés ou automoteurs pour l'application d'engrais solides, c'est-à-dire les distributeurs d'engrais solides en nappe, centrifuges, les distributeurs à tube oscillant et les distributeurs d'engrais solides en lignes, ainsi que les distributeurs d'engrais solides entraînés par un moteur auxiliaire conçus pour un seul opérateur et utilisés en agriculture. En outre, il spécifie le type d'informations sur les pratiques d'utilisation sûre (y compris les risques résiduels) que le fabricant doit donner.
ISO 4254-8:2018 traite de tous les phénomènes dangereux, situations et événements dangereux significatifs (tels que listés dans l'Annexe A) applicables aux distributeurs d'engrais solides, lorsqu'ils sont utilisés normalement et dans les conditions prévisibles par le fabricant (voir Article 4), à l'exception des phénomènes dangereux engendrés par:
- un éclairage inadéquat de la zone de travail;
- une visibilité inadéquate depuis le poste de conduite/la position de l'opérateur;
- une assise inadéquate;
- les fonctions de déplacement (transmission, freinage, etc.);
- le retournement;
- les équipements de chargement de l'engrais dans la machine;
- un moteur auxiliaire.
ISO 4254-8:2018 ne s'applique pas à la compatibilité électromagnétique (CEM) ni aux phénomènes dangereux liés à l'environnement (excepté le bruit).
ISO 4254-8:2018 ne s'applique pas:
- aux semoirs combinés qui créent un sillon dans le sol et déposent l'engrais dans ledit sillon;
- aux matériels de distribution de pesticides en granulés;
- aux distributeurs à conducteur à pied;
- aux distributeurs portés à dos.
ISO 4254-8:2018 ne s'applique pas aux distributeurs d'engrais solides fabriqués avant sa date de publication.
Lorsque des exigences du présent document diffèrent de celles de l'ISO 4254‑1, les exigences du présent document prévalent sur celles de l'ISO 4254‑1, pour les machines conçues et fabriquées conformément aux dispositions du présent document.
Kmetijski stroji - Varnost - 8. del: Trosilniki mineralnih gnojil (ISO 4254-8:2018)
Ta del standarda ISO 4254, uporabljen skupaj s standardom ISO 4254-1, določa varnostne zahteve in njihovo preverjanje za načrtovanje in konstrukcijo priklopnih, polpriklopnih, vlečenih ali samognanih trosilnikov mineralnih gnojil za trdna gnojila, tj. trosilniki mineralnih gnojil s polno širino, stroji za razsipavanje mineralnih gnojil, trosilniki mineralnih gnojil z nihajno cevjo in stroji za razsipavanje v vrstah ter tudi trosilniki mineralnih gnojil, ki jih poganja pomožen motor, ki jih upravlja samo en upravljavec, ki se uporabljajo v poljedelstvu, vrtnarstvu in gozdarstvu. Določa tudi vrsto informacij o varnih delovnih praksah (vključno z ostalimi tveganji), ki jih mora zagotoviti proizvajalec.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2018
1DGRPHãþD
SIST EN 14017:2006+A2:2009
Kmetijski stroji - Varnost - 8. del: Trosilniki mineralnih gnojil (ISO 4254-8:2018)
Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)
Landmaschinen - Sicherheit - Teil 8: Mineraldüngerstreuer (ISO 4254-8:2018)
Matériel agricole - Sécurité - Partie 8 : Distributeur d'engrais solides (ISO 4254-8:2018)
Ta slovenski standard je istoveten z: EN ISO 4254-8:2018
ICS:
65.060.25 2SUHPD]DVNODGLãþHQMH Equipment for storage,
SULSUDYRLQUD]GHOMHYDQMH preparation and distribution
JQRMLY of fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 4254-8
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2018
EUROPÄISCHE NORM
ICS 65.060.25 Supersedes EN 14017:2005+A2:2009
English Version
Agricultural machinery - Safety - Part 8: Solid fertilizer
distributors (ISO 4254-8:2018)
Matériel agricole - Sécurité - Partie 8: Distributeurs Landmaschinen - Sicherheit - Teil 8:
d'engrais solides (ISO 4254-8:2018) Mineraldüngerstreuer (ISO 4254-8:2018)
This European Standard was approved by CEN on 30 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-8:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 4254-8:2018) has been prepared by Technical Committee ISO/TC 23 “Tractors
and machinery for agriculture and forestry” in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2018, and conflicting national standards
shall be withdrawn at the latest by November 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document will supersede EN 14017:2005+A2:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4254-8:2018 has been approved by CEN as EN ISO 4254-8:2018 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request "M/396
Mandate to CEN and CENELEC for Standardization in the field of machinery" to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2006/42/EC
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2006/42/EC this EN
Within the limits of the scope All normative clauses
For relation of normative
all relevant essential
clauses of this standard to
requirements with the
significant hazards/relevant
exception of essential
essential requirements of
requirement 1.3.2 (risk of
2006/42/EC, see informative
breakup) are covered.
Annex A "List of significant
hazards" of this standard in
combination with Annex D
“Examples of significant
hazards, hazardous situations,
hazardous events and their
relation to the Essential
Requirements of the
Machinery Directive
2006/42/EC” of CEN Guide
(https://boss.cen.eu/ref/CEN_
414.pdf).
Compliance with EN ISO 4254-
8:2018 and the relevant
requirements of EN ISO 4254-
1:2013 is required to achieve
presumption of a conformity
with the relevant Essential
Requirements of Directive
2006/42/EC.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 4254-8
Second edition
2018-01
Agricultural machinery — Safety —
Part 8:
Solid fertilizer distributors
Matériel agricole — Sécurité —
Partie 8: Distributeurs d'engrais solides
Reference number
ISO 4254-8:2018(E)
©
ISO 2018
ISO 4254-8:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 4254-8:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Safety requirements, risk reduction and protective measures . 3
4.1 General . 3
4.2 Stability when parked and for manual handling . 3
4.2.1 General. 3
4.2.2 Mounted machines fitted with rollers for manual handling when dismounted . 3
4.2.3 Machines with adjustable supporting devices . 3
4.3 Distributing components . 3
4.3.1 Swivelling and movable distributing components . 3
4.3.2 Spreading plates and oscillating tubes . 3
4.4 Feeding components guarding . 6
4.5 Loading . 7
4.5.1 Operator access to loading locations without load . 7
4.5.2 Operator access to manual loading location with load . 7
4.5.3 Other boarding means . 9
4.6 Checking of the hopper contents . 9
4.7 Protection against ejection of fertilizer . 9
4.8 Removal of the spreading device .10
4.9 Flow rate calibration system .10
4.10 Hitching and clearance zone .10
4.11 Noise .11
4.11.1 Noise reduction as a safety requirement .11
5 Verification of the safety requirements, risk reduction, and protective measures .12
6 Information for use .12
6.1 Operator's manual .12
6.2 Safety and instructional signs .13
Annex A (informative) List of significant hazards.14
Bibliography .16
-------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.