iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 13225:2012

(Main)

Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)

Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)

This International Standard specifies the most important design and metrological characteristics of height
gauges (with analogue indication or digital indication) for linear-dimensional measurements perpendicular to a
surface plate.

Geometrische Produktspezifikation (GPS) - Längenmessgeräte; Vertikale Längenmessgeräte - Konstruktionsmerkmale und messtechnische Merkmale (ISO 13225:2012)

Diese Internationale Norm legt die wichtigsten Konstruktionsmerkmale und messtechnischen Merkmale für vertikale Längenmessgeräte (mit Skalen  oder Ziffernanzeige) für Längenmessungen senkrecht zu einer Prüfplatte fest.

Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel; Mesureurs verticaux - Caractéristiques de conception et caractéristiques métrologiques (ISO 13225:2012)

La présente Norme internationale spécifie les caractéristiques de conception et les caractéristiques
métrologiques les plus importantes des mesureurs verticaux (avec indication analogique ou indication
numérique) pour les mesurages dimensionnels linéaires perpendiculairement à un marbre.

Specifikacija geometrijskih veličin izdelka - Merilni instrumenti za merjenje dolžin - Merilni instrumenti za merjenje višin - Konstrukcijske in meroslovne značilnosti (ISO 13225:2012)

Ta mednarodni standard določa najpomembnejše konstrukcijske in metrološke značilnosti merilnih instrumentov za merjenje višin (z analognim ali digitalnim prikazom) za merjenje višin pravokotno na ravno merilno ploščo.

General Information

Status
Published
Publication Date
30-Apr-2012
Withdrawal Date
29-Nov-2012
ICS
17.040.30 - Measuring instruments
Technical Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Drafting Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-May-2012
Due Date
15-Feb-2010
Completion Date
01-May-2012
Ref Project
SIST EN ISO 13225:2012 - Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)

Buy Standard

EN ISO 13225:2012EN ISO 13225:2012
PreviousNext
Standard
EN ISO 13225:2012
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13225:2012
01-september-2012
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND0HULOQLLQVWUXPHQWL]DPHUMHQMHGROåLQ
0HULOQLLQVWUXPHQWL]DPHUMHQMHYLãLQ.RQVWUXNFLMVNHLQPHURVORYQH]QDþLOQRVWL
,62
Geometrical product specifications (GPS) - Dimensional measuring equipment; Height
gauges - Design and metrological characteristics (ISO 13225:2012)
Geometrische Produktspezifikation (GPS) - Längenmessgeräte: Vertikale
Längenmessgeräte - Konstruktionsmerkmale und messtechnische Merkmale (ISO
13225:2012)
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel;
Mesureurs verticaux - Caractéristiques de conception et caractéristiques métrologiques
(ISO 13225:2012)
Ta slovenski standard je istoveten z: EN ISO 13225:2012
ICS:
17.040.30 Merila Measuring instruments
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND *36 Specification (GPS)
SIST EN ISO 13225:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13225:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 13225:2012


EUROPEAN STANDARD
EN ISO 13225

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2012
ICS 17.040.30
English Version
Geometrical product specifications (GPS) - Dimensional
measuring equipment; Height gauges - Design and metrological
characteristics (ISO 13225:2012)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) -
Équipement de mesurage dimensionnel; Mesureurs Längenmessgeräte: Vertikale Längenmessgeräte -
verticaux - Caractéristiques de conception et Konstruktionsmerkmale und messtechnische Merkmale
caractéristiques métrologiques (ISO 13225:2012) (ISO 13225:2012)
This European Standard was approved by CEN on 16 March 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13225:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13225:2012
EN ISO 13225:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13225:2012
EN ISO 13225:2012 (E)
Foreword
This document (EN ISO 13225:2012) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn
at the latest by November 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement noti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3611:2023(Main)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
SIST EN ISO 3611:2023

This document provides the most important design and metrological characteristics of micrometers for external measurements:
—    with analogue indication;
—    with digital indication: mechanical or electronic digital display.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12179:2022(Main)
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
SIST EN ISO 12179:2022

This document specifies the calibration and adjustment of the metrological characteristics of contact (stylus) instruments for the measurement of surface texture by the profile method as defined in ISO 3274. The calibration and adjustment is intended to be carried out with the aid of measurement standards.
Annex B specifies the calibration and adjustment of metrological characteristics of simplified operator contact (stylus) instruments which do not conform with ISO 3274.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10360-13:2021(Main)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
SIST EN ISO 10360-13:2021

This document specifies the acceptance tests for verifying the performance of an optical 3D coordinate measuring system (CMS) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the optical 3D CMS.
This document is applicable to verification of the measuring performance of CMSs if the surface characteristics (e.g. glossiness, colour) of the object to be scanned are restricted and within a cooperative range.
This document does not apply to other types of CMSs, including those covered by the other parts of the ISO 10360 series.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10360-10:2021(Main)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
SIST EN ISO 10360-10:2021

This document specifies the acceptance tests for verifying the performance of a laser tracker by measuring calibrated test lengths, according to the specifications of the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the laser tracker. The acceptance and reverification tests given in this document are applicable to laser trackers utilizing a retroreflector, or a retroreflector in combination with a stylus or optical distance sensor, as a probing system. Laser trackers that use interferometric measurement (IFM), absolute distance measurement (ADM) or both can be verified using this document. This document can also be used to specify and verify the relevant performance tests of other spherical coordinate measurement systems that use cooperative targets, such as “laser radar” systems.
NOTE       Systems which do not track the target, such as laser radar systems, will not be tested for probing performance.
This document does not explicitly apply to measuring systems that do not use a spherical coordinate system. However, interested parties can apply this document to such systems by mutual agreement.
This document specifies:
—    performance requirements that can be assigned by the manufacturer or the user of the laser tracker;
—    the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements;
—    rules for proving comformity;
—    applications for which the acceptance and reverification tests can be used.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13385-2:2020(Main)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
SIST EN ISO 13385-2:2020

This document specifies the most important design and metrological characteristics of calliper depth gauges
—     with analogue indication: vernier scale or circular scale (dial); and
—     with digital indication: digital display.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10360-5:2020(Main)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
SIST EN ISO 10360-5:2020

This document specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using:
—     any type of contacting probing system; and
—     spherical or hemispherical stylus tip(s).
NOTE    CMM probing performance tests are specified by the maximum permissible errors (MPEs), due to the impracticality of isolating the performance of the probing system from that of the CMM, even on a small artefact such as a test sphere.
This document applies to CMMs supplied with any of the following:
a)   single-stylus probing systems;
b)   multi-stylus probing systems with fixed multiple styli attached to a single probe (e.g. "star" stylus);
c)   multiple probing systems such as those with a stylus for each of their probes;
d)   systems with articulating probing systems;
e)   stylus and probe changing systems;
f)    manual (non-driven) and automated CMMs;
g)   installations including a scanning probe, capable of being used in a scanning mode.
This document is not applicable to non-contacting probing systems, which require different testing procedures.
The term ?combined CMM and multi-stylus probing system size error' has been shortened to ?multi-stylus size error' for convenience. This applies in similar cases.
If it is desirable to isolate the probing system performance as far as is practical, the influence of the CMM can be minimized but not eliminated. See Annex C for more information.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13385-1:2019(Main)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
SIST EN ISO 13385-1:2019

This document provides the most important design and metrological characteristics of callipers
—          with analogue indication: vernier scale or circular scale (dial), and
—          with digital indication: digital display.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20170:2019(Main)
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
SIST EN ISO 20170:2019

This document describes principles and tools to control a manufacturing process in accordance with a GPS specification. For this purpose a set of one or more complementary, independent characteristics (size, form, orientation, and location characteristics independent to each other) that correlate to the manufacturing process parameters and to the manufacturing process coordinate system established from the manufacturing datum system are used.
This document describes the concept of decomposition of the macro-geometrical part of the GPS specification. It does not cover the micro-geometry, i.e. surface texture.
The objective of the decomposition presented in this document is to define correction values for manufacturing control or to perform a statistical analysis of the process.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14978:2018(Main)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
SIST EN ISO 14978:2019

This document specifies the general requirements, calibration, terms and definitions of characteristics of GPS measuring equipment, for example micrometers, callipers, gauge blocks and rotary axis form measuring instruments. This document forms the basis for standards defining and describing the design characteristics and metrological characteristics for measuring equipment and gives guidance for the development and content of standards for GPS measuring equipment.
This document is intended to ease the communication between manufacturer/supplier and customer/user and to make the specification phase of GPS measuring equipment more accurate. This document is also intended as a tool to be used in companies in the process of defining and selecting relevant characteristics for measuring equipment.
This document includes terms which are frequently used in connection with the characterization of specific measuring equipment.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5458:2018(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
SIST EN ISO 5458:2018

This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zones are grouped together with location or orientation constraints, through the use of the CZ, CZR or SIM modifiers.
This document does not cover the use of the pattern specifications when the least and maximum material requirement is applied (see ISO 2692).
This document does not cover the establishment of common datum (see ISO 5459) based on pattern features.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day