Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry

This European Standard provides a harmonized methodology for calculating GHG emissions from the ferro-alloys industry based on the mass balance approach . It also provides key performance indicators over time of ferro-alloys plants.  It addresses the following direct and indirect sources of GHG:
-   Scope 1  - Direct GHG emissions from sources that are owned or controlled by the company, such as emissions result from the following sources:
-   smelting (reduction) process;
-   decomposition of carbonates inside the furnace;
-   auxiliaries operation related to the smelting operation (i.e. aggregates, drying processes, heating of ladles, etc.).
-   Scope 2 - Indirect GHG emissions from:
-   the generation of purchased electricity consumed in the company’s owned or controlled equipment.
This European Standard is to be used in conjunction with FprEN 19694-1, which contains generic, overall requirements, definitions and rules applicable to the determination of GHG emissions for all energy-intensive sectors, provides common methodological issues and defines the details for applying the rules. The application of this standard to the sector-specific standards ensures accuracy, precision and reproducibility of the results and is for this reason a normative reference standard. The requirements of these standards do not supersede legislative requirements.

Emissionen aus stationären Quellen - Bestimmung von Treibhausgasen (THG) aus energieintensiven Industrien - Teil 6: Ferrolegierungsindustrie

Diese Europäische Norm stellt eine harmonisierte Methodik zur Berechnung der Treibhausgasemissionen aus der Ferrolegierungsindustrie auf der Grundlage des Massenbilanzansatzes ) bereit. Darüber hinaus stellt sie zeitverlaufsbezogene Schlüsselleistungskennzahlen für Anlagen bereit, in denen Ferrolegierungen hergestellt werden. Sie behandelt die folgenden direkten und indirekten Treibhausgasquellen:
—   Scope 1: direkte Treibhausgasemissionen aus Quellen, die im Besitz des Unternehmens sind oder von diesem kontrolliert werden, wie Emissionen aus folgenden Quellen:
—   Schmelz(reduktions)prozess:
—   Carbonatzerfall im Ofen;
—   unterstützende Vorgänge im Zusammenhang mit dem Schmelzen, (d. h. Zuschlagstoffe, Trocknungsprozesse, Erwärmen der Pfannen usw.);
—   Scope 2: indirekte Treibhausgasemissionen aus:
—   der Erzeugung zugekaufter elektrischer Energie, die in den Ausrüstungen verbraucht wird, welche sich im Besitz des Unternehmens befinden oder von diesem kontrolliert werden.
Diese Europäische Norm ist in Verbindung mit der Norm FprEN 19694 1, anzuwenden, in der generische, allgemeine Anforderungen, Definitionen und Regeln behandelt sind, die für die Bestimmung von Treibhausgasemissionen aus allen energieintensiven Sektoren gelten, und in der gemeinsame methodische Aspekte beschrieben und die Einzelheiten zur Anwendung dieser Regeln festgelegt sind. Durch die Anwendung dieser Norm auf sektorspezifische Normen sind die Genauigkeit, Präzision und Wiederholbarkeit der Ergebnisse sichergestellt, daher handelt es sich hierbei um eine normative Bezugsnorm. Die Anforderungen dieser Normen ersetzen keine Rechtsvorschriften.

Émissions de sources fixes - Détermination des émissions de gaz à effet de serre (GES) dans les industries énergo-intensives - Partie 6: Industrie des ferro-alliages

La présente Norme européenne fournit une méthodologie harmonisée pour calculer les émissions de GES dans l'industrie des ferro-alliages, basée sur le bilan massique . Elle fournit également des indicateurs clés qui permettront de déterminer les performances des installations de production de ferro-alliages au fil du temps. Elle examine les sources suivantes d'émissions directes et indirectes de GES :
—   Type 1 – Émissions directes de GES provenant de sources détenues ou contrôlées par l'entreprise, les émissions émanant des sources suivantes :
—   procédé de fusion/réduction carbothermique (réduction) ;
—   décomposition des carbonates à l'intérieur du four ;
—   fonctionnement des auxiliaires liés à l'opération de fusion/réduction carbothermique (granulats, procédés de séchage, chauffage des poches de coulée, etc.).
—   Type 2 – Émissions indirectes de GES provenant :
—   de la génération de l'électricité achetée et consommée par les équipements détenus ou contrôlés par l'entreprise.
La présente Norme européenne doit être utilisée conjointement avec le FprEN 19694-1 qui contient des exigences générales génériques, des définitions et des règles applicables pour la détermination des émissions de GES pour tous les secteurs consommateurs d'énergie, expose des questions méthodologiques communes et détaille l'application des règles exposées. L'application de la présente norme aux normes sectorielles garantit l'exactitude, la fidélité et la reproductibilité des résultats et est, de ce fait, une norme de référence normative. Les exigences de ces normes ne se substituent pas aux exigences législatives.

Emisije nepremičnih virov - Določevanje emisij toplogrednih plinov (TGP) v energetsko intenzivnih industrijah - 6. del: Proizvodnja ferozlitin

Merjenje emisij toplogrednih plinov pri proizvodnji ferozlitin s potrjeno metodo določanja. Ta standard je rezultat sprejetja M/478, pri čemer bo sestavljenih šest standardov: en splošni standard in pet standardov, povezanih z ustreznim sektorjem.

General Information

Status
Published
Publication Date
19-Jul-2016
Withdrawal Date
30-Jan-2017
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
15-Mar-2022

Buy Standard

Standard
EN 19694-6:2017 - BARVE
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19694-6:2014 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LQEmissionen aus stationären Quellen - Bestimmung von Treibhausgasen (THG) aus energieintensiven Industrien - Teil 6: FerrolegierungsindustrieÉmissions de sources fixes - Détermination des émissions des gaz à effet de serre dans les industries à forte intensité énergétique - Partie 6: Industrie des ferro-alliagesStationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry77.100Železove zlitineFerroalloys13.040.40Stationary source emissions13.020.40Onesnaževanje, nadzor nad onesnaževanjem in ohranjanjePollution, pollution control and conservationICS:Ta slovenski standard je istoveten z:EN 19694-6:2016SIST EN 19694-6:2017en,fr,de01-julij-2017SIST EN 19694-6:2017SLOVENSKI
STANDARD



SIST EN 19694-6:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 19694-6
July
t r s x ICS
s uä r v rä v r English Version
Stationary source emissions æ Determination of industries æ Part
xã Ferroalloy industry Émissions de sources fixes æ Détermination des industries énergoæintensives æ Partie
xã Industrie des ferroæalliages
Emissionen aus stationären Quellen æ Bestimmung von Industrien æ Teil
xã Ferrolegierungsindustrie This European Standard was approved by CEN on
w May
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s { x { væ xã t r s x ESIST EN 19694-6:2017



EN 19694-6:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Symbols and abbreviations . 8 5 Determination of GHGs – Principles . 9 5.1 General . 9 5.2 Major GHG in ferro-alloys. 9 5.3 Determination based on mass balance . 9 5.4 Use of waste gas/heat recovery . 9 6 Boundaries . 9 6.1 General . 9 6.2 Operational boundaries . 9 6.3 Organizational boundaries .
...

SLOVENSKI STANDARD
oSIST prEN ISO 19694-6:2014
01-november-2014
(PLVLMHQHSUHPLþQLKYLURY'RORþHYDQMHHPLVLMWRSORJUHGQLKSOLQRY 7*3 Y
HQHUJHWVNRLQWHQ]LYQLKLQGXVWULMDKGHO3URL]YRGQMDIHUR]OLWLQ ,62',6

Stationary source emissions - Determination of greenhouse gas (GHG) emissions in
energy-intensive industries - Part 6: Ferroalloy industry (ISO/DIS 19694-6:2014)
Emissionen aus stationären Quellen - Bestimmung von Treibhausgasen (THG) aus
energieintensiven Industrien - Teil 6: Ferrolegierungsindustrie (ISO/DIS 19694-6:2014)
Émissions de sources fixes - Détermination des émissions des gaz à effet de serre dans
les industries à forte intensité énergétique - Partie 6: Industrie des ferro-alliages
(ISO/DIS 19694-6:2014)
Ta slovenski standard je istoveten z: prEN ISO 19694-6
ICS:
13.040.40 (PLVLMHQHSUHPLþQLKYLURY Stationary source emissions
oSIST prEN ISO 19694-6:2014 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19694-6:2014

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19694-6:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19694-6
ISO/TC 146/SC 1 Secretariat: NEN
Voting begins on: Voting terminates on:
2014-08-21 2015-01-21
Stationary source emissions — Determination of
greenhouse gas (GHG) emissions in energy-intensive
industries —
Part 6:
Ferroalloy industry
Émissions de sources fixes — Détermination des émissions des gaz à effet de serre dans les industries à
forte intensité énergétique —
Partie 6: Industrie des alliages de fer
ICS: 13.040.40
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19694-6:2014(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2014

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19694-6:2014


Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19694-6:2014
General information regarding the preparation of EN ISO 19694 Part 1 to 6

By end of 2010 the European Commission/EFTA gave Mandate M/478 to CEN entrusting CEN
to produce and adopt Standards, in particular containing harmonized methods for:

a. Measuring, testing and quantifying greenhouse gas (GHG) emissions from sector-
specific sources

b. Assessing the level of GHG emissions performance of production processes over
time, at production sites;

c. Establishing and providing reliable, accurate and quality information for reporting and
verification purposes.

Based on a gap analysis it was agreed to describe the assessment methodologies of the five
energy-intensive industry sectors steel-, cement -, aluminum-, lime- and ferroalloy industry as
well as general aspects in the six standards. As sector-specific knowhow was essential, the
concerned industr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.